モジュール:Convert/textのソースを表示

-- Text used by Module:Convert, for en.wikipedia.org (English).
-- This is a separate module to simplify translation for use on another wiki.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.

-- ローカライズ用設定 (中国語版を参照のこと)
local translation_table = {
 omitsep = true,      -- omit separator before local symbol/name
 per_word = '毎',     -- 「per」の日本語訳
 plural_suffix = '',  -- disable plural unit names
 plural_suffix_us = 's',  -- plural unit names for US spells.
}

-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.
local SIprefixes = {
 -- The prefix field is what the prefix should be, if different from the prefix used.
 ['Y'] = { exponent = 24, name = 'ヨッタ',                   },
 ['Z'] = { exponent = 21, name = 'ゼッタ',                   },
 ['E'] = { exponent = 18, name = 'エクサ'  ,                 },
 ['P'] = { exponent = 15, name = 'ペタ' , name_us = 'peta'   },
 ['T'] = { exponent = 12, name = 'テラ' , name_us = 'tera'   },
 ['G'] = { exponent =  9, name = 'ギガ' , name_us = 'giga'   },
 ['M'] = { exponent =  6, name = 'メガ' , name_us = 'mega'   },
 ['k'] = { exponent =  3, name = 'キロ' , name_us = 'kilo'   },
 ['h'] = { exponent =  2, name = 'ヘクト',                   },
 ['da']= { exponent =  1, name = 'デカ' , name_us = 'deka'   },
 ['d'] = { exponent = -1, name = 'デシ' ,                    },
 ['c'] = { exponent = -2, name = 'センチ', name_us = 'centi' },
 ['m'] = { exponent = -3, name = 'ミリ',  name_us = 'milli'  },
 ['μ'] = { exponent = -6, name = 'マイクロ',                },  -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
 ['µ'] = { exponent = -6, name = 'マイクロ', prefix = 'μ'   },  -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
 ['u'] = { exponent = -6, name = 'マイクロ', prefix = 'μ', name_us = 'micro' },  -- not an SI prefix, but allow for people typing this
 ['n'] = { exponent = -9, name = 'ナノ' , name_us = 'nano'   },
 ['p'] = { exponent =-12, name = 'ピコ' , name_us = 'pico'   },
 ['f'] = { exponent =-15, name = 'フェムト', name_us = 'femto'},
 ['a'] = { exponent =-18, name = 'アット' ,                  },
 ['z'] = { exponent =-21, name = 'ゼプト',                   },
 ['y'] = { exponent =-24, name = 'ヨクト',                   },
}

-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = {
 { "US", link =『米国慣用単位』},
 { "U.S.", link =『米国慣用単位』},
 { "imperial", link =『帝国単位』},
 { "imp", link =『帝国単位』},
}

-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").
-- key = { "name", link = "article title", exponent = numeric_key_value }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
 ["3"]  = { "thousand", exponent = 3 },
 ["6"]  = { "million", exponent = 6 },
 ["9"]  = { "billion", link = "西洋の命数法", exponent = 9 },
 ["12"] = { "trillion", link = "兆", exponent = 12 },
 ["15"] = { "quadrillion", link = "1 E15", exponent = 15 },
}

local all_categories = {
 unit = "[[Category:テンプレート呼び出しエラーのあるページ/Template:Convert/不明な単位]]",
 option = "[[Category:テンプレート呼び出しエラーのあるページ/Template:Convert/正しくないオプション]]",
 warning = '[[Category:テンプレート呼び出しエラーのあるページ/Template:Convert/正しくないオプション]]',
 tracking = '', --[[Category:Convert tracking]]
}

-- For some error messages, the following puts the wanted style around
-- each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '"', ['}'] = '"' }  -- no longer need the more elaborate substitute used before 2013-09-28

-- All messages that may be displayed if a problem occurs.
local all_messages = {
 -- Message format string: $1=title, $2=text, $3=category, $4=anchor.
 -- Each displayed message starts with "Convert:" so can easily locate by searching article.
 cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[:en:Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3<span class="error"></span>',
 cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[:en:Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3<span class="error"></span>',
 cvt_format_preview = '<strong class="error">[[Template:Convert]]のエラー: $1 [[:en:Help:Convert messages#$4|(ヘルプ)]]</strong>$3',
 -- Each of following messages is a table:
 -- { [<span class="ltr">1</span>] = 'title',         -- mouseover title text
 --   [<span class="ltr">2</span>] = 'text',          -- link text displayed in article
 --   [<span class="ltr">3</span>] = 'category key',  -- key to lookup category in all_categories
 --   [<span class="ltr">4</span>] = 'anchor',        -- anchor for link to relevant section on help page
 --   regex = gsub_regex,
 --   replace = gsub_table,
 -- }                    Mouseover title text                           Link text               CatKey     Anchor
 cvt_bad_input      = { '入力値"$1"は数字と単位でなければなりません' , '不正な入力'          , 'option',  'invalid_input'        },
 cvt_bad_num        = { '変換する値"$1"が数字ではありません'         , '不正な数字'          , 'option',  'invalid_number'       },
 cvt_big_prec       = { 'Precision "$1" is too large'                , 'precision too large' , 'option',  'precision_too_large'  },
 cvt_invalid_num    = { '数字がオーバーフローしました'               , '数字のオーバーフロー', 'option',  'number_overflow'      },
 cvt_no_num         = { '変換する数値が未指定です'                   , '要数字'              , 'option',  'needs_number'         },
 cvt_no_num2        = { '範囲指定には<span class="ltr">2</span>つの数字が必要です'            , 'needs another number', 'option',  'needs_another_number' },
 cvt_bad_frac       = { '"$1"には<span class="ltr">2</span>以上の整数が必要です'              , '不正な分数'          , 'option',  'invalid_fraction'     },
 cvt_bad_prec       = { 'Precision "$1" must be an integer'          , 'invalid precision'   , 'option',  'invalid_precision'    },
 cvt_bad_sigfig     = { '"$1"には正の整数を入力してください'         , '不正な有効数字'      , 'option',  'invalid_sigfig'       },
 cvt_empty_option   = { '空白のオプション"$1"は無視されます'         , '空白のオプション'    , 'option',  'empty_option'         },
 cvt_deprecated     = { 'Option "$1" is deprecated'                  , '*'                   , 'option',  'deprecated_option', format = 'cvt_format2', nowarn = true },
 cvt_no_spell       = { 'Spelling is not available'                  , 'モジュールのバグ'    , 'option',  'ask_for_help'         },
 cvt_unknown_option = { '不正なオプション"$1"は無視されます'         , '不正なオプション'    , 'option',  'invalid_option'       },
 cvt_wd_fail        = { 'Unable to access Wikidata'               , 'ウィキデータに問題あり' , 'option',  'wikidata_problem'     },
 cvt_bad_default    = { 'Unit "$1" has an invalid default'           , 'モジュールのバグ'    , 'unit'  ,  'ask_for_help'         },
 cvt_bad_unit       = { 'Unit "$1" is invalid here'                  , 'unit invalid here'   , 'unit'  ,  'unit_invalid_here'    },
 cvt_no_default     = { 'Unit "$1" has no default output unit'       , 'モジュールのバグ'    , 'unit'  ,  'ask_for_help'         },
 cvt_no_unit        = { '単位名が必要です'                           , '要単位名'            , 'unit'  ,  'needs_unit_name'      },
 cvt_unknown        = { '不明な単位「$1」が指定されました'           , '不明な単位'          , 'unit'  ,  'unknown_unit'         },
 cvt_should_be      = { '$1'                                         , '曖昧な単位'          , 'unit'  ,  'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace },
 cvt_mismatch       = { '"$1"は"$2"に変換できません'                 , '変換できない単位'    , 'unit'  ,  'unit_mismatch'        },
 cvt_bug_convert    = { 'バグ：単位変換に失敗しました'               , 'モジュールのバグ'    , 'unit'  ,  'ask_for_help'         },
 cvt_lookup         = { '単位"$1"の定義に誤りがあります'             , 'モジュールのバグ'    , 'unit'  ,  'ask_for_help'         },
}

-- Text to join input value/unit with output value/unit.
local disp_joins = {
 -- [<span class="ltr">1</span>]=before output, [<span class="ltr">2</span>]=after output, [<span class="ltr">3</span>]=between outputs in a combination; default "; "
 -- [wantname] gives default abbr=off
 ["or"]         = {『 または 』   , "" , " または ", wantname = true },
 ["sqbr-sp"]    = { " ["      , "]" },
 ["sqbr-nbsp"]  = { "&nbsp;[" , "]" },
 ["comma"]      = { ", "      , "" , ", " },
 ["slash-sp"]   = { " / "     , "" , wantname = true },
 ["slash-nbsp"] = { "&nbsp;/ ", "" , wantname = true },
 ["slash-nosp"] = { "/"       , "" , wantname = true },
 ["b"]          = { " ("      , ")" },
 ["(<span class="ltr">or</span>)"]       = { " ("      , ")", " or " },
 ["br"]         = { "<br />"  , "" , wantname = true },
 ["br()"]       = { "<br />(" , ")", wantname = true },
}

-- Text to separate values in a range.
local range_types = {
 -- Specifying a table requires either:
 -- * "off" and "on" values (for "abbr=off" and "abbr=on"), or
 -- * "input" and "output" values (for LHS and RHS);
 -- other fields are optional.
 -- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens.
 -- With "exception = true", that also occurs with "adj=on|abbr=on".
 -- If "adj" is defined here, that text (unchanged) is used with "adj=on".
 ["+"]      = " + ",
 [","]      = ",&nbsp;",
 [", and"]  = ", and ",
 [", or"]   = ", or ",
 ["by"]     = " by ",
 ["-"]      = "–",
 ["to about"] = " to about ",
 ["and"]    = { off = " and ", on = " and ", exception = true },
 ["and(-)"] = { input = " and ", output =『–』},
 ["or"]     = { off = " or " , on = " or " , exception = true },
 ["to"]     = { off = " - " , on = " - " , exception = true },
 ["to(-)"]  = { input = "&nbsp;to ", output =『–』},
 ["+/-"]    = { off = "&nbsp;±&nbsp;", on = "&nbsp;±&nbsp;", adj = "&nbsp;±&nbsp;", is_range_change = true },
 ["by(<span class="ltr">x</span>)"]  = { input = " by ", output = " ×&nbsp;", out_range_x = true },
 ["x"]      = { off = " by ", on = " ×&nbsp;", abbr_range_x = true },
 ["xx"]     = "&nbsp;×&nbsp;",
 ["*"]      = "×",
 ["/"]      = "&thinsp;/&thinsp;",  -- for a table of high/low temperatures with {{convert|83|/|63|F|disp=br()|abbr=values}}
}

local range_aliases = {
 -- ["alternative name for a range"] = "standard range name"
 ["–"]        = "-",
 ["&ndash;"]  = "-",
 ["×"]        = "x",
 ["&times;"]  = "x",
 ["±"]        = "+/-",
 ["&plusmn;"] = "+/-",
}

-- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}.
-- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}.
-- Words must be in correct order for searching, for example, 'x' after 'xx'.
local range_words = { '-', '–', 'xx', 'x', '*' }

local ranges = {
 types = range_types,
 aliases = range_aliases,
 words = range_words,
}

-- Valid option names.
local en_option_name = {
 -- ["local text for option name"] = "en name used in this module"
 ["$"] = "$",
 ["abbr"] = "abbr",
 ["adj"] = "adj",
 ["comma"] = "comma",
 ["debug"] = "debug",
 ["disp"] = "disp",
 ["frac"] = "frac",
 ["input"] = "input",
 ["lang"] = "lang",
 ["lk"] = "lk",
 ["order"] = "order",
 ["qid"] = "qid",
 ["qual"] = "qual",
 ["qualifier"] = "qual",
 ["round"] = "round",
 ["sigfig"] = "sigfig",
 ["sing"] = "adj",                   -- "sing" is an old alias for "adj"
 ["sortable"] = "sortable",
 ["sp"] = "sp",
 ["spell"] = "spell",
 ["stylein"] = "stylein",
 ["styleout"] = "styleout",
 ["tracking"] = "tracking",
}

-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At enwiki, "abbr" includes:
--     ["comma"] = "opt_nocomma"
-- As a result, if the template uses abbr=comma, Module:Convert sets:
--     parms["opt_nocomma"] = true
--     parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
-- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated.
local en_option_value = {
 -- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$"
 ["abbr"] = {
  -- ["local text for option value"] = "en value used in this module"
  ["def"] = "",                   -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
  ["h"] = "on",                   -- abbr=on + use "h" for hand unit (default)
  ["hh"] = "opt_hand_hh",         -- abbr=on + use "hh" for hand unit
  ["in"] = "in",                  -- use symbol for LHS unit
  ["none"] = "off",               -- old name for "off"
  ["off"] = "off",                -- use name for all units
  ["on"] = "on",                  -- use symbol for all units
  ["out"] = "out",                -- use symbol for RHS unit (default)
  ["unit"] = "unit",              -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶<span class="ltr">km</span>)
  ["values"] = "opt_values",      -- show only input and output numbers, not units
  ["~"] = "opt_also_symbol",      -- show input unit symbol as well as name
 },
 ["adj"] = {
  ["mid"] = "opt_adjectival, opt_adj_mid",  -- adj=on with user-specified text after input unit (between input and output)
  ["off"] = "",                   -- ignored (off is the default)
  ["on"] = "opt_adjectival",      -- unit name is singular and hyphenated
  ["pre"] = "opt_one_preunit",    -- user-specified text before input unit
  ["ri0"] = "opt_ri=0",           -- round input with precision = 0
  ["ri1"] = "opt_ri=1",           -- round input with precision = 1
  ["ri2"] = "opt_ri=2",           -- round input with precision = 2
  ["ri3"] = "opt_ri=3",           -- round input with precision = 3
 },
 ["comma"] = {
  ["5"] = "opt_comma5",           -- only use numsep grouping if 5 or more digits
  ["gaps"] = "opt_gaps",          -- use gaps, not numsep, to separate groups of digits
  ["gaps3"] = "opt_gaps, opt_gaps3",  -- group only in threes rather than default of no gap before a single digit after decimal mark
  ["off"] = "opt_nocomma",        -- no numsep in input or output numbers
 },
 ["debug"] = {
  ["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible
 },
 ["disp"] = {
  ["5"] = "opt_round=5?",         -- round output value to nearest 5
  ["b"] = "b",                    -- join: '(...)'
  ["(<span class="ltr">or</span>)"] = "(<span class="ltr">or</span>)",              -- join: '(...)' with 'or' between outputs in a combination
  ["br"] = "br",                  -- join: '<br />'
  ["br()"] = "br()",              -- join: '<br />(...)'
  ["comma"] = "comma",            -- join: ','
  ["flip"] = "opt_flip",          -- reverse order of input/output
  ["number"] = "opt_output_number_only",  -- display output value (not input, and not output symbol/name)
  ["or"] = "or",                  -- join: 'or'
  ["out"] = "opt_output_only",
  ["output number only"] = "opt_output_number_only",
  ["output only"] = "opt_output_only",
  ["preunit"] = "opt_two_preunits",    -- user-specified text before input and output units
  ["sqbr"] = "sqbr",              -- join: '[...]'
  ["table"] = "opt_table",        -- output is suitable for a table cell with align="right"
  ["tablecen"] = "opt_tablecen",  -- output is suitable for a table cell with align="center"
  ["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
  ["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
  ["unit2"] = "opt_output_unit_only",
  ["x"] = "x",                    -- join: <first>...<second> (user-specified text)
 },
 -- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more
 -- input=x is handled as a special case: x should be <value><space><unitcode> or <wikidata-property-id>
 ["lang"] = {                        -- language for output digits (both en and local digits are always accepted for input)
  ["en"] = "opt_lang_en",         -- use en digits for numbers, regardless of local language
  ["local"] = "opt_lang_local",   -- use local digits for numbers (default, although config can change default to en)
 },
 ["lk"] = {
  ["in"] = "in",                  -- link LHS unit name or symbol
  ["off"] = "off",                -- do not link: same as default except for hand unit
  ["on"] = "on",                  -- link all unit names or symbols (but not twice for the same unit)
  ["out"] = "out",                -- link RHS unit name or symbol
 },
 ["order"] = {
  ["flip"] = "opt_flip",          -- reverse order of input/output
  ["out"] = "opt_order_out",      -- do not show input; instead, use order in output combination, with the first output shown as the input
 },
 -- qid=x is handled as a special case: x should be a Wikidata Q item identifier.
 -- qual=x is handled as a special case: x should be a Wikidata Q item identifier.
 ["round"] = {
  ["0.5"] = "opt_round=0.5",      -- round output value to nearest 0.5
  ["5"] = "opt_round=5",          -- round output value to nearest 5
  ["10"] = "opt_round=10",        -- round output value to nearest 10 (same as but clearer than "|-1")
  ["25"] = "opt_round=25",        -- round output value to nearest 25
  ["50"] = "opt_round=50",        -- round output value to nearest 50
  ["each"] = "opt_round_each",    -- using default precision in a range, round each output separately (default uses highest precision of each item in range)
 },
 -- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more
 ["sortable"] = {
  ["off"] = "",                   -- ignored (off is the default)
  ["on"] = "opt_sortable_on",     -- output sort key for use in a sortable table, based on value from converting to a standard base unit
  ["debug"] = "opt_sortable_on, opt_sortable_debug",  -- |sortable=debug is the same as |sortable=on|debug=yes
 },
 ["sp"] = {
  ["us"] = "opt_sp_us",           -- use U.S. spelling (like "meter" instead of default "metre")
 },
 ["spell"] = {                       -- only English spelling is supported; not scientific notation; only some fractions
  ["in"] = "opt_spell_in",        -- spell input value in words
  ["In"] = "opt_spell_in, opt_spell_upper",                -- spell input value in words with first letter uppercase
  ["on"] = "opt_spell_in, opt_spell_out",                  -- spell input and output values in words
  ["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase
 },
 -- stylein=x is handled as a special case: x can be any text
 -- styleout=x is handled as a special case: x can be any text
 -- tracking=x is handled as a special case: x can be any text
}

local titles = {
 ["frac"] = "分数/styles.css",
 ["sfrac"] = "Sfrac/styles.css",
}

return {
 SIprefixes = SIprefixes,
 all_categories = all_categories,
 all_messages = all_messages,
 currency = { ['$'] = true, ['£'] = true, ['€'] = true, ['₱'] = true, ['₽'] = true, ['¥'] = true },
 customary_units = customary_units,
 disp_joins = disp_joins,
 en_option_name = en_option_name,
 en_option_value = en_option_value,
 eng_scales = eng_scales,
 ranges = ranges,
 titles = titles,
 translation_table = translation_table,
}