On 04/01/2008, Christos Zoulas <christos%astron.com@localhost> wrote: > In article > <42b497160801032059o2b2b3616n4265e5045a41033%mail.gmail.com@localhost>, > Kimi <kimimeister%gmail.com@localhost> wrote: > >Hi > > > >I would still like to get NetBSD up & running on a computer as to why > >it hangs after pcppi1: attached to attimer1. > > > >can I have directions or a guide to help me understand why NetBSD > >hangs at that point? > > mine says: > > pcppi1 at acpi0 (SPK, PNP0800) > pcppi1: io 0x61 > midi0 at pcppi1: PC speaker (CPU-intensive output) > spkr0 at pcppi1 > sysbeep0 at pcppi1 > RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured > attimer1 at acpi0 (TMR, PNP0100): AT Timer > attimer1: io 0x40-0x5f irq 0 > I have something strange, I booted it from the loader with boot -v & it allowed me to install fine, it has even rebooted in to a GENERIC kernel, all fine. it is baffling. here is my dmesg: Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.45 (GENERIC) #0: Wed Dec 26 02:52:44 PST 2007 builds@wb28:/home/builds/ab/HEAD/amd64/200712260002Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC total memory = 1022 MB avail memory = 974 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 SMBIOS rev. 2.2 @ 0xf0800 (33 entries) ( ) mainbus0 (root) cpu0 at mainbus0 apid 0: (boot processor) cpu0: AMD Sempron(tm) Processor 3000+, 1799.57 MHz cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX> cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW> cpu0: features2: 1<SSE3> cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 128 KB 64B/line 16-way cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS> cpu0: AMD Cool`n'Quiet Technology 1800 MHz cpu0: available frequencies (Mhz): 1000 1800 cpu0: calibrating local timer cpu0: apic clock running at 199 MHz cpu0: WARNING: AMD errata present, BIOS upgrade may be cpu0: WARNING: necessary to ensure reliable operation cpu0: 8 page colors ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 14, 24 pins acpi0 at mainbus0: Advanced Configuration and Power Interface acpi0: using Intel ACPI CA subsystem version 20070320 acpi0: X/RSDT: OemId <AWARD ,AWRDACPI,42302e31>, AslId <AWRD,00000000> mpacpi: could not get bus number, assuming bus 0 acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button MEM (PNP0C01) [System Board] at acpi0 not configured PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): AT Timer attimer1: io 0x40-0x43 irq 0 RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured pcppi1 at acpi0 (SPKR, PNP0800) pcppi1: io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured acpitz0 at acpi0 (THRM): active cooling level 0: 118.0C critical 120.0C passive 41.0C pcppi1: attached to attimer1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Silicon Integrated System 760 Host Bridge (rev. 0x03) agp0 at pchb0: 1 Miscellaneous Control unit(s) found. agp0: aperture at 0xd8000000, size 0x8000000 ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C202 (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga0 at pci1 dev 0 function 0: NVIDIA GeForce4 Ti 4200 (AGP8X) (rev. 0xa1) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 direct rendering for vga0 unsupported pcib0 at pci0 dev 2 function 0 pcib0: Silicon Integrated System 964 Host Bridge (rev. 0x36) siside0 at pci0 dev 2 function 5 siside0: Silicon Integrated Systems 760 IDE controller (rev. 0x01) siside0: bus-master DMA support present siside0: primary channel wired to compatibility mode siside0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at siside0 channel 0 siside0: secondary channel wired to compatibility mode siside0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at siside0 channel 1 auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio auich0: interrupting at ioapic0 pin 18 (irq 10) auich0: ac97: Analog Devices AD1888 codec; headphone, 20 bit DAC, no 3D stereo auich0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA> ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f) ohci0: interrupting at ioapic0 pin 20 (irq 6) ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f) ohci1: interrupting at ioapic0 pin 21 (irq 9) ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f) ohci2: interrupting at ioapic0 pin 22 (irq 4) ohci2: OHCI version 1.0, legacy support usb2 at ohci2: USB revision 1.0 uhub2 at usb2 uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0 host controller (rev. 0x00) ehci0: interrupting at ioapic0 pin 23 (irq 3) ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Silicon Integrated System EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91 sip0: interrupting at ioapic0 pin 19 (irq 5) sip0: Ethernet address 00:15:58:5a:11:56 rlphy0 at sip0 phy 1: RTL8201L 10/100 media interface, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto siside1 at pci0 dev 5 function 0 siside1: Silicon Integrated Systems 180/96X SATA controller (rev. 0x01) siside1: bus-master DMA support present siside1: primary channel wired to native-PCI mode siside1: using ioapic0 pin 17 (irq 11) for native-PCI interrupt atabus2 at siside1 channel 0 siside1: secondary channel wired to native-PCI mode atabus3 at siside1 channel 1 cmdide0 at pci0 dev 8 function 0 cmdide0: Silicon Image 0680 (rev. 0x02) cmdide0: bus-master DMA support present cmdide0: primary channel configured to native-PCI mode cmdide0: using ioapic0 pin 18 (irq 10) for native-PCI interrupt atabus4 at cmdide0 channel 0 cmdide0: secondary channel configured to native-PCI mode atabus5 at cmdide0 channel 1 fxp0 at pci0 dev 9 function 0: i82550 Ethernet, rev 13 fxp0: interrupting at ioapic0 pin 19 (irq 5) fxp0: Ethernet address 00:02:b3:b4:e1:9d inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pchb1 at pci0 dev 24 function 0 pchb1: Advanced Micro Devices K8 AMD64 HyperTransport configuration (rev. 0x00) pchb2 at pci0 dev 24 function 1 pchb2: Advanced Micro Devices K8 AMD64 Address Map configuration (rev. 0x00) pchb3 at pci0 dev 24 function 2 pchb3: Advanced Micro Devices K8 AMD64 DRAM configuration (rev. 0x00) pchb4 at pci0 dev 24 function 3 pchb4: Advanced Micro Devices K8 AMD64 Miscellaneous configuration (rev. 0x00) isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz audio0 at auich0: full duplex, mmap, independent Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 1 configuration 1 interface 1 uhidev1: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/0 uhidev1: 3 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 ums0 at uhidev1 reportid 3: 0 buttons and Z dir. wsmouse0 at ums0 mux 0 wd0 at atabus0 drive 0: <WDC WD400EB-11CPF0> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <SAMSUNG DVD-ROM SD-616Q, , F401> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) wd1 at atabus4 drive 0: <WDC WD800EB-11DJF0> wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd1(cmdide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) wd2 at atabus5 drive 0: <WDC WD800BB-55JKA0> wd2: drive supports 16-sector PIO transfers, LBA addressing wd2: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd2: 32-bit data port wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd2(cmdide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) I have the most latest bios even with warning thank you for your help Christos > > try disabling drivers in order to find which one hangs. > > christos > > -- Kimi