Rafal Boni wrote: > I just rebooted my trusty Netra T1 with a shiny new 4.99.48 kernel and > thought I'd kick off a userland build. Things seemed to go swimmingly > for a few minutes, then the machine ground to an un-usable state -- > userland seems to be mostly non-responsive, though the machine is > pingable, answers a ^T at a tty (well, it seems to be wedged harder > now.. it did for a while after the apparent lockup), and the disk sounds > like progress is being made on the build. > > But, I can't get any echo from a tty anymore, and god forbid I should > want to log in ;) > > Anyone seeing anything similar? Should I go back to the last-known-good > kernel for a while? ;) > > Machine is a Netra T1 200 -- UltraSPARC-IIe @ 500 MHz with 512MB RAM. > > Thanks, > --rafal > BTW, DDB says the following: db> ps PID PPID PGRP UID S FLAGS LWPS COMMAND WAIT 16169 1863 16169 1000 2 0x4000 1 w biowait 17872 7369 7369 0 2 0x4000 1 atrun anonget 7369 7996 7369 0 2 0x4000 1 sh wait 7996 379 379 0 2 0 1 cron pipe 8921 16694 412 1000 2 0x4000 1 nbmake biowait 16694 16529 412 1000 2 0x4000 1 sh wait 16529 9391 412 1000 2 0x4000 1 nbmake wait 9391 952 412 1000 2 0x4000 1 sh wait 1863 1387 1863 1000 2 0x4000 1 sh wait 1387 1335 1335 1000 2 0x100 1 sshd biowait 1335 234 1335 0 2 0x4101 1 sshd netio 1971 1 1971 0 2 0x4000 1 getty biowait 1017 301 1017 1000 2 0x4000 1 tail kqread 952 958 412 1000 2 0x4000 1 nbmake wait 958 895 412 1000 2 0x4000 1 sh wait 895 853 412 1000 2 0x4000 1 nbmake wait 853 871 412 1000 2 0x4000 1 sh wait 871 412 412 1000 2 0x4000 1 nbmake wait 412 301 412 1000 2 0x4000 1 sh wait 301 395 301 1000 2 0x4000 1 sh wait 395 399 399 1000 2 0x100 1 sshd biowait 399 234 399 0 2 0x4101 1 sshd netio 387 357 357 12 2 0x4100 1 qmgr biowait 392 357 357 12 2 0x4100 1 pickup biowait 379 1 379 0 2 0 1 cron biowait 343 1 343 0 2 0 1 inetd kqread 357 1 357 0 2 0x4100 1 master biowait 234 1 234 0 2 0 1 sshd biowait 253 1 253 0 2 0 1 ntpd pause 108 1 108 0 2 0 1 syslogd biowait 90 1 90 0 2 0 1 dhclient select 1 0 1 0 2 0x4001 1 init wait >0 -1 0 0 2 0x20002 25 system * --rafal