Hi! Tim, From: Tim Rightnour <root%garbled.net@localhost> Date: Sun, 20 Jan 2008 23:22:11 -0700 (MST) > Just ot be sure I understand you correctly, you mean that you have a few > different fwohci and ehci cards, and only some of them work, while others do > not? Yes. I have some cards. (fwohci+[eo]hci, fwohci, [eo]hci) However, it was only a card of only of fwohci and [eo]hci that worked. It agrees from this to Nishimura-san's opinion. From: "Toru Nishimura" <locore64%alkyltechnology.com@localhost> Date: Mon, 21 Jan 2008 21:23:09 +0900 > Just a wild guess; some "BIOS" (preboot program to enumerate PCI > device and prepare various PCI matters for real OS) fail to cope with > "two-functions-in-a-single" cards which equip two PCI device chips. > Lately most of PC BIOS do well the job smart, however it's likely a case > where old RISC firmware fails the similar way, I suspect. > Yeah.. I think that panic in pcn was fixed in -current. Thanks. I updated if_pcn.c. > As for the card that caused the wierd hang after the cpu probe, can you boot > that card with RESIDUAL_DATA_DUMP and see if it says anything interesting? > (I'm not sure, that might happen too late to capture it) Sorry. I get the boot log on com0 with PCI_CONFIGURE_DUMP only. However, it was felt that I was strange. It hangs up when the console is vga. However, it booted for com0 with a strange log. As many as 17 S3 86C864-1 doesn't exist in my prep. X-) ^^^^^^^^^^^^^^ typescript.now: working (fwohci, [eo]hci) typescript.17vga: strange log with com0 (fwohci+[eo]hci, [eo]hci) I think the slow resignation. If you want to pursue this phenomenon, I will continue and pass you log. Thanks, -- kiyohara
>> NetBSD/prep BOOT, Revision 1.8 >> (builds@wb40, Thu Nov 8 01:45:46 PST 2007) Boot: Loading in() 2688248+208176 [172048+166967]=0x316264 start=0x100000 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.49 (TEST) #0: Tue Jan 22 01:26:08 JST 2008 lance%hierophant.fool@localhost:/sys/arch/prep/compile/TEST Model: IBM PPS Model 7248 (E) total memory = 128 MB avail memory = 120 MB mainbus0 (root) cpu0 at mainbus0: 604 (Revision 3.4), ID 0 (primary) cpu0: HID0 c084<ICE,DCE,SGE,BHT>, powersave: 1 cpu0: 133.33 MHz cpu at mainbus0 not configured pnpbus0 at mainbus0 wdc0 at pnpbus0: port 0x1f0-0x1f7 0x3f6, irq 13, DMA 6 atabus0 at wdc0 channel 0 wdc1 at pnpbus0: port 0x170-0x177 0x376, irq 13, DMA 7 atabus1 at wdc1 channel 0 mcclock0 at pnpbus0: port 0x70-0x71, irq 8: mc146818 compatible time-of-day clock nvram0 at pnpbus0: port 0x74-0x75 0x76 pci0 at mainbus0 bus 0: indirect configuration space access pchb0 at pci0 dev 0 function 0: PCI configuration registers: Common header: 0x00: 0x00011057 0x00800146 0x06000024 0x00000000 Vendor Name: Motorola (0x1057) Device Name: MPC105 "Eagle" Host Bridge (0x0001) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0080 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: on Data parity error detected: off DEVSEL timing: fast (0x0) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: bridge (0x06) Subclass Name: host (0x00) Interface: 0x00 Revision ID: 0x24 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00000000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 not implemented(?) Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00000000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00200000 0x00006040 0x00000000 0x00000000 0x90: 0x003f001f 0x00007f5f 0x00000000 0x00000000 0xa0: 0x00000035 0x00000000 0x9f071a09 0xc31b429b 0xb0: 0x00000000 0x00000000 0x01250000 0x00000000 0xc0: 0x520000a5 0x03000010 0xf8030000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0xffcb0aaa 0x00000fa2 0x0002b2dc 0x00000000 Don't know how to pretty-print device-dependent header. Motorola MPC105 "Eagle" Host Bridge (host bridge, revision 0x24) at ? dev 0 function 0 (intrswiz 0, intrpin 0, i/o off, mem on, no quirks) pchb0: Motorola MPC105 "Eagle" Host Bridge (rev. 0x24) pchb0: L2 cache: 512K, write-through mode pcib0 at pci0 dev 11 function 0: PCI configuration registers: Common header: 0x00: 0x000a1014 0x04000147 0x06010002 0x00000000 Vendor Name: IBM (0x1014) Device Name: Fire Coral ISA Bridge w/PnP (0x000a) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0400 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: slow (0x2) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: bridge (0x06) Subclass Name: ISA (0x01) Interface: 0x00 Revision ID: 0x02 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x000081a1 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x000000ff Base address register at 0x10 type: 32-bit i/o base: 0x000081a0, size: 0x00000008 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00000000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0xff Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000100 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. IBM Fire Coral ISA Bridge w/PnP (ISA bridge, revision 0x02) at ? dev 11 function 0 (intrswiz 0, intrpin 0, i/o on, mem on, no quirks): IBM Fire Coral ISA Bridge w/PnP (rev. 0x02) pcn0 at pci0 dev 12 function 0: PCI configuration registers: Common header: 0x00: 0x20001022 0x02800147 0x02000016 0x0000ff00 Vendor Name: Advanced Micro Devices (0x1022) Device Name: PCnet-PCI Ethernet (0x2000) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0280 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: on Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: network (0x02) Subclass Name: ethernet (0x00) Interface: 0x00 Revision ID: 0x16 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xff Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00008181 0x00822a00 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00800000 0x00000000 0x00000000 0xff060100 Base address register at 0x10 type: 32-bit i/o base: 0x00008180, size: 0x00000020 Base address register at 0x14 type: 32-bit nonprefetchable memory base: 0x00822a00, size: 0x00000020 Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00800000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0xff Minimum Grant: 0x06 Interrupt pin: 0x01 (pin A) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. Advanced Micro Devices PCnet-PCI Ethernet (ethernet network, revision 0x16) at ? dev 12 function 0 (intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): AMD PCnet-PCI Ethernet pcn0: Am79c970A PCnet-PCI II rev 6, Ethernet address 08:00:5a:f8:7c:23 pcn0: interrupting at irq 15 pcn0: 10base5, 10base5-FDX, 10baseT, 10baseT-FDX, auto, auto-FDX vga0 at pci0 dev 14 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00000000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00810000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 not implemented(?) Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00810000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at ? dev 14 function 0 (intrswiz 0, intrpin 0, i/o on, mem on, no quirks): S3 86C864-1 ("Vision864") (rev. 0x00) wsdisplay0 at vga0 kbdmux 1 direct rendering for vga0 unsupported siop0 at pci0 dev 16 function 0: PCI configuration registers: Common header: 0x00: 0x00011000 0x02000147 0x01000002 0x0000ff00 Vendor Name: Symbios Logic (0x1000) Device Name: 53c810 (0x0001) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: mass storage (0x01) Subclass Name: SCSI (0x00) Interface: 0x00 Revision ID: 0x02 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xff Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00008001 0x00822800 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x0000010f Base address register at 0x10 type: 32-bit i/o base: 0x00008000, size: 0x00000100 Base address register at 0x14 type: 32-bit nonprefetchable memory base: 0x00822800, size: 0x00000100 Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00000000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x01 (pin A) Interrupt line: 0x0f Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x330000d8 0x1d000007 0x00800000 0x020f0080 0x90: 0x8021ee58 0xffffff00 0x2035f000 0x807e9560 0xa0: 0x00000000 0x98080000 0x8021e290 0x8021e290 0xb0: 0x00000050 0x200000b8 0x010000c0 0x8021e2e0 0xc0: 0x00000000 0x0f000085 0x0080000b 0x80000007 0xd0: 0xffff0000 0xffffff00 0xffff0000 0x80a45a60 0xe0: 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xf0: 0xffffffff 0xffffffff 0xffffffff 0xffffffff Don't know how to pretty-print device-dependent header. Symbios Logic 53c810 (SCSI mass storage, revision 0x02) at ? dev 16 function 0 (intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): Symbios Logic 53c810 (fast scsi) siop0: interrupting at irq 15 scsibus0 at siop0: 8 targets, 8 luns per target ohci0 at pci0 dev 18 function 0: PCI configuration registers: Common header: 0x00: 0x00351033 0x02100146 0x0c031041 0x0080fc08 Vendor Name: NEC (0x1033) Device Name: USB Host Controller (0x0035) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0210 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: serial bus (0x0c) Subclass Name: USB (0x03) Interface: 0x10 Revision ID: 0x41 BIST: 0x00 Header Type: 0x00+multifunction (0x80) Latency Timer: 0xfc Cache Line Size: 0x08 Type 0 ("normal" device) header: 0x10: 0x00820000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00351735 0x30: 0x00000000 0x00000040 0x00000000 0x2a010100 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x00820000, size: 0x00001000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x1735 Subsystem ID: 0x0035 Expansion ROM Base Address: 0x00000000 Capability list pointer: 0x40 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x2a Minimum Grant: 0x01 Interrupt pin: 0x01 (pin A) Interrupt line: 0x00 Capability register at 0x40 type: 0x01 (Power Management, rev. 1.0) Device-dependent header: 0x40: 0x7e020001 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0xc4303305 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. NEC USB Host Controller (USB serial bus, interface 0x10, revision 0x41) at ? dev 18 function 0 (intrswiz 0, intrpin 0x1, i/o off, mem on, no quirks): NEC USB Host Controller (rev. 0x41) ohci0: interrupting at irq 15 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 ohci1 at pci0 dev 18 function 1: PCI configuration registers: Common header: 0x00: 0x00351033 0x02100146 0x0c031041 0x0000fc08 Vendor Name: NEC (0x1033) Device Name: USB Host Controller (0x0035) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0210 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: serial bus (0x0c) Subclass Name: USB (0x03) Interface: 0x10 Revision ID: 0x41 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xfc Cache Line Size: 0x08 Type 0 ("normal" device) header: 0x10: 0x00821000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00351735 0x30: 0x00000000 0x00000040 0x00000000 0x2a010200 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x00821000, size: 0x00001000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x1735 Subsystem ID: 0x0035 Expansion ROM Base Address: 0x00000000 Capability list pointer: 0x40 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x2a Minimum Grant: 0x01 Interrupt pin: 0x02 (pin B) Interrupt line: 0x00 Capability register at 0x40 type: 0x01 (Power Management, rev. 1.0) Device-dependent header: 0x40: 0x7e020001 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. NEC USB Host Controller (USB serial bus, interface 0x10, revision 0x41) at ? dev 18 function 1 (intrswiz 0, intrpin 0x2, i/o off, mem on, no quirks): NEC USB Host Controller (rev. 0x41) ohci1: interrupting at irq 15 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 ehci0 at pci0 dev 18 function 2: PCI configuration registers: Common header: 0x00: 0x00e01033 0x02100146 0x0c032001 0x0000fc08 Vendor Name: NEC (0x1033) Device Name: USB Host Controller (0x00e0) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0210 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: serial bus (0x0c) Subclass Name: USB (0x03) Interface: 0x20 Revision ID: 0x01 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xfc Cache Line Size: 0x08 Type 0 ("normal" device) header: 0x10: 0x00822900 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00e01735 0x30: 0x00000000 0x00000040 0x00000000 0x22100300 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x00822900, size: 0x00000100 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x1735 Subsystem ID: 0x00e0 Expansion ROM Base Address: 0x00000000 Capability list pointer: 0x40 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x22 Minimum Grant: 0x10 Interrupt pin: 0x03 (pin C) Interrupt line: 0x00 Capability register at 0x40 type: 0x01 (Power Management, rev. 1.0) Device-dependent header: 0x40: 0x7e020001 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x003f2020 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0xc4303305 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. NEC USB Host Controller (USB serial bus, interface 0x20, revision 0x01) at ? dev 18 function 2 (intrswiz 0, intrpin 0x3, i/o off, mem on, no quirks): NEC USB Host Controller (rev. 0x01) ehci0: interrupting at irq 15 ehci0: companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 fwohci0 at pci0 dev 22 function 0: PCI configuration registers: Common header: 0x00: 0x30441106 0x02100147 0x0c001043 0x0000f808 Vendor Name: VIA Technologies (0x1106) Device Name: VT6306 IEEE 1394 Host Controller (0x3044) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0210 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: serial bus (0x0c) Subclass Name: Firewire (0x00) Interface: 0x10 Revision ID: 0x43 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xf8 Cache Line Size: 0x08 Type 0 ("normal" device) header: 0x10: 0x00822000 0x00008101 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000050 0x00000000 0x00000100 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x00822000, size: 0x00000800 Base address register at 0x14 type: 32-bit i/o base: 0x00008100, size: 0x00000080 Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00000000 Capability list pointer: 0x50 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x01 (pin A) Interrupt line: 0x00 Capability register at 0x50 type: 0x01 (Power Management, rev. 1.0) Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00020001 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. VIA Technologies VT6306 IEEE 1394 Host Controller (Firewire serial bus, interface 0x10, revision 0x43) at ? dev 22 function 0 (intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x43) fwohci0: interrupting at irq 15 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 0c:10:11:00:00:00:04:6d fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S100, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip at ieee1394if0 not configured fwohci0: Initiate bus reset isa0 at pcib0 lpt0 at isa0 port 0x3bc-0x3bf irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 attimer0 at isa0 port 0x40-0x43: AT Timer pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) spkr0 at pcppi0 isabeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support pcppi0: attached to attimer0 wss0 at isapnp0 port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0 wss0: Crystal CS4232 Sound Chip : broken audio0 at wss0: full duplex, mmap opl at wss0 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0001, , > port 0x200/8 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0002, , 4232> port 0x10/8 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0003, , > port 0x330/2 irq 9 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0004, , CD-ROM> port 0x10/4 not configured biomask 80000ce netmask 80000ce ttymask 80000ce fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) ieee1394if0: bus manager 0 (me) scsibus0: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: <CONNER, CFP2105S 2.14GB, 1524> disk fixed sd0: 2048 MB, 3940 cyl, 10 head, 106 sec, 512 bytes/sect x 4194304 sectors sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers, tagged queueing cd0 at scsibus0 target 3 lun 0: <IBM, CDRM00203\000\000\000\000\000!K, BZ26> cdrom removable cd0: sync (200.00ns offset 8), 8-bit (5.000MB/s) transfers boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs Mon Jan 21 16:39:49 GMT 2008 swapctl: adding /dev/sd0b as swap device at priority 0 Checking for botched superblock upgrades: done. Starting file system checks: /dev/rsd0a: file system is clean; not checking /dev/rsd0f: file system is clean; not checking /dev/rsd0g: file system is clean; not checking Setting tty flags. Setting sysctl variables: Starting network. Hostname: justice.fool IPv6 mode: host Configuring network interfaces: pcn0. add net default: gateway 192.168.1.21 Adding interface aliases: Building databases... Starting syslogd. Checking for core dump... savecore: can't find device 1465/105919 Jan 22 01:39:59 justice savecore: can't find device 1465/105919 Setting date via ntp. Mounting all filesystems... Clearing /tmp. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Starting local daemons:. Updating motd. Starting sshd. postfix/postfix-script: starting the Postfix mail system Starting cron. Tue Jan 22 01:40:16 JST 2008 NetBSD/prep (justice.fool) (tty00) login:
>> NetBSD/prep BOOT, Revision 1.8 >> (builds@wb40, Thu Nov 8 01:45:46 PST 2007) Boot: Loading in() 2689504+208136 [172224+167077]=0x316844 start=0x100000 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.49 (TEST) #0: Tue Jan 22 02:38:07 JST 2008 lance%hierophant.fool@localhost:/sys/arch/prep/compile/TEST Model: IBM PPS Model 7248 (E) total memory = 128 MB avail memory = 120 MB mainbus0 (root) cpu0 at mainbus0: 604 (Revision 3.4), ID 0 (primary) cpu0: HID0 c084<ICE,DCE,SGE,BHT>, powersave: 1 cpu0: 133.33 MHz cpu at mainbus0 not configured Couldn't find PNP data for bus 0 devfunc 0xb0 pnpbus0 at mainbus0 wdc0 at pnpbus0: port 0x1f0-0x1f7 0x3f6, irq 13, DMA 6 atabus0 at wdc0 channel 0 wdc1 at pnpbus0: port 0x170-0x177 0x376, irq 13, DMA 7 atabus1 at wdc1 channel 0 mcclock0 at pnpbus0: port 0x70-0x71, irq 8: mc146818 compatible time-of-day clock nvram0 at pnpbus0: port 0x74-0x75 0x76 pci0 at mainbus0 bus 0: indirect configuration space access pchb0 at pci0 dev 0 function 0: PCI configuration registers: Common header: 0x00: 0x00011057 0x00800146 0x06000024 0x00000000 Vendor Name: Motorola (0x1057) Device Name: MPC105 "Eagle" Host Bridge (0x0001) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0080 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: on Data parity error detected: off DEVSEL timing: fast (0x0) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: bridge (0x06) Subclass Name: host (0x00) Interface: 0x00 Revision ID: 0x24 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00000000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 not implemented(?) Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00000000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00200000 0x00006040 0x00000000 0x00000000 0x90: 0x003f001f 0x00007f5f 0x00000000 0x00000000 0xa0: 0x00000035 0x00000000 0x9f071a09 0xc31b429b 0xb0: 0x00000000 0x00000000 0x01250000 0x00000000 0xc0: 0x520000a5 0x03000010 0xf8030000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0xffcb0aaa 0x00000fa2 0x0002b2dc 0x00000000 Don't know how to pretty-print device-dependent header. Motorola MPC105 "Eagle" Host Bridge (host bridge, revision 0x24) at ? dev 0 function 0 (intrswiz 0, intrpin 0, i/o off, mem on, no quirks) pchb0: Motorola MPC105 "Eagle" Host Bridge (rev. 0x24) pchb0: L2 cache: 512K, write-through mode pcib0 at pci0 dev 11 function 0: PCI configuration registers: Common header: 0x00: 0x000a1014 0x04000147 0x06010002 0x00000000 Vendor Name: IBM (0x1014) Device Name: Fire Coral ISA Bridge w/PnP (0x000a) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0400 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: slow (0x2) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: bridge (0x06) Subclass Name: ISA (0x01) Interface: 0x00 Revision ID: 0x02 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00008121 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x000000ff Base address register at 0x10 type: 32-bit i/o base: 0x00008120, size: 0x00000008 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00000000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0xff Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000100 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. IBM Fire Coral ISA Bridge w/PnP (ISA bridge, revision 0x02) at ? dev 11 function 0 (intrswiz 0, intrpin 0, i/o on, mem on, no quirks): IBM Fire Coral ISA Bridge w/PnP (rev. 0x02) pcn0 at pci0 dev 12 function 0: PCI configuration registers: Common header: 0x00: 0x20001022 0x02800147 0x02000016 0x0000ff00 Vendor Name: Advanced Micro Devices (0x1022) Device Name: PCnet-PCI Ethernet (0x2000) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0280 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: on Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: network (0x02) Subclass Name: ethernet (0x00) Interface: 0x00 Revision ID: 0x16 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xff Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00008101 0x08b22200 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x08b00000 0x00000000 0x00000000 0xff060100 Base address register at 0x10 type: 32-bit i/o base: 0x00008100, size: 0x00000020 Base address register at 0x14 type: 32-bit nonprefetchable memory base: 0x08b22200, size: 0x00000020 Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x08b00000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0xff Minimum Grant: 0x06 Interrupt pin: 0x01 (pin A) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. Advanced Micro Devices PCnet-PCI Ethernet (ethernet network, revision 0x16) at ? dev 12 function 0 (intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): AMD PCnet-PCI Ethernet pcn0: Am79c970A PCnet-PCI II rev 6, Ethernet address 08:00:5a:f8:7c:23 pcn0: interrupting at irq 15 pcn0: 10base5, 10base5-FDX, 10baseT, 10baseT-FDX, auto, auto-FDX S3 86C864-1 ("Vision864") (VGA prehistoric) at pci0 dev 14 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci0 dev 14 function 0 (intrswiz 0, intrpin 0, i/o on, mem on, no quirks) not configured siop0 at pci0 dev 16 function 0: PCI configuration registers: Common header: 0x00: 0x00011000 0x02000147 0x01000002 0x0000ff00 Vendor Name: Symbios Logic (0x1000) Device Name: 53c810 (0x0001) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: mass storage (0x01) Subclass Name: SCSI (0x00) Interface: 0x00 Revision ID: 0x02 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xff Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x00008001 0x08b22000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x00000000 0x00000000 0x00000000 0x0000010f Base address register at 0x10 type: 32-bit i/o base: 0x00008000, size: 0x00000100 Base address register at 0x14 type: 32-bit nonprefetchable memory base: 0x08b22000, size: 0x00000100 Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x00000000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x01 (pin A) Interrupt line: 0x0f Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x330000d8 0x1d000007 0x00800000 0x020f0080 0x90: 0x8023ac78 0xffffff00 0x2035f000 0x807e9560 0xa0: 0x00000000 0x98080000 0x8023a0b0 0x8023a0b0 0xb0: 0x00000050 0x200000b8 0x010000c0 0x8023a100 0xc0: 0x00000000 0x0f000049 0x0080000b 0x80000007 0xd0: 0xffff0000 0xffffff00 0xffff0000 0x808b8cf8 0xe0: 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xf0: 0xffffffff 0xffffffff 0xffffffff 0xffffffff Don't know how to pretty-print device-dependent header. Symbios Logic 53c810 (SCSI mass storage, revision 0x02) at ? dev 16 function 0 (intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): Symbios Logic 53c810 (fast scsi) siop0: interrupting at irq 15 scsibus0 at siop0: 8 targets, 8 luns per target ohci0 at pci0 dev 18 function 0: PCI configuration registers: Common header: 0x00: 0x00351033 0x02100146 0x0c031041 0x0080fc08 Vendor Name: NEC (0x1033) Device Name: USB Host Controller (0x0035) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0210 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: serial bus (0x0c) Subclass Name: USB (0x03) Interface: 0x10 Revision ID: 0x41 BIST: 0x00 Header Type: 0x00+multifunction (0x80) Latency Timer: 0xfc Cache Line Size: 0x08 Type 0 ("normal" device) header: 0x10: 0x08b20000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00351735 0x30: 0x00000000 0x00000040 0x00000000 0x2a010100 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x08b20000, size: 0x00001000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x1735 Subsystem ID: 0x0035 Expansion ROM Base Address: 0x00000000 Capability list pointer: 0x40 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x2a Minimum Grant: 0x01 Interrupt pin: 0x01 (pin A) Interrupt line: 0x00 Capability register at 0x40 type: 0x01 (Power Management, rev. 1.0) Device-dependent header: 0x40: 0x7e020001 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0xc4303305 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. NEC USB Host Controller (USB serial bus, interface 0x10, revision 0x41) at ? dev 18 function 0 (intrswiz 0, intrpin 0x1, i/o off, mem on, no quirks): NEC USB Host Controller (rev. 0x41) ohci0: interrupting at irq 15 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 ohci1 at pci0 dev 18 function 1: PCI configuration registers: Common header: 0x00: 0x00351033 0x02100146 0x0c031041 0x0000fc08 Vendor Name: NEC (0x1033) Device Name: USB Host Controller (0x0035) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0210 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: serial bus (0x0c) Subclass Name: USB (0x03) Interface: 0x10 Revision ID: 0x41 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xfc Cache Line Size: 0x08 Type 0 ("normal" device) header: 0x10: 0x08b21000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00351735 0x30: 0x00000000 0x00000040 0x00000000 0x2a010200 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x08b21000, size: 0x00001000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x1735 Subsystem ID: 0x0035 Expansion ROM Base Address: 0x00000000 Capability list pointer: 0x40 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x2a Minimum Grant: 0x01 Interrupt pin: 0x02 (pin B) Interrupt line: 0x00 Capability register at 0x40 type: 0x01 (Power Management, rev. 1.0) Device-dependent header: 0x40: 0x7e020001 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. NEC USB Host Controller (USB serial bus, interface 0x10, revision 0x41) at ? dev 18 function 1 (intrswiz 0, intrpin 0x2, i/o off, mem on, no quirks): NEC USB Host Controller (rev. 0x41) ohci1: interrupting at irq 15 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 ehci0 at pci0 dev 18 function 2: PCI configuration registers: Common header: 0x00: 0x00e01033 0x02100146 0x0c032001 0x0000fc08 Vendor Name: NEC (0x1033) Device Name: USB Host Controller (0x00e0) Command register: 0x0146 I/O space accesses: off Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0210 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: serial bus (0x0c) Subclass Name: USB (0x03) Interface: 0x20 Revision ID: 0x01 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0xfc Cache Line Size: 0x08 Type 0 ("normal" device) header: 0x10: 0x08b22100 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00e01735 0x30: 0x00000000 0x00000040 0x00000000 0x22100300 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x08b22100, size: 0x00000100 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x1735 Subsystem ID: 0x00e0 Expansion ROM Base Address: 0x00000000 Capability list pointer: 0x40 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x22 Minimum Grant: 0x10 Interrupt pin: 0x03 (pin C) Interrupt line: 0x00 Capability register at 0x40 type: 0x01 (Power Management, rev. 1.0) Device-dependent header: 0x40: 0x7e020001 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x003f2020 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0xc4303305 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. NEC USB Host Controller (USB serial bus, interface 0x20, revision 0x01) at ? dev 18 function 2 (intrswiz 0, intrpin 0x3, i/o off, mem on, no quirks): NEC USB Host Controller (rev. 0x01) ehci0: interrupting at irq 15 ehci0: companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 ppb0 at pci0 dev 22 function 0: PCI configuration registers: Common header: 0x00: 0x00213388 0x02900147 0x06040013 0x0001ff08 Vendor Name: HiNT (0x3388) Device Name: HB1 PCI-PCI Bridge (0x0021) Command register: 0x0147 I/O space accesses: on Memory space accesses: on Bus mastering: on Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: on Address/data stepping: off System error (SERR): on Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0290 Capability List support: on 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: on Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: bridge (0x06) Subclass Name: PCI (0x04) Interface: 0x00 Revision ID: 0x13 BIST: 0x00 Header Type: 0x01 (0x01) Latency Timer: 0xff Cache Line Size: 0x08 Type 1 (PCI-PCI bridge) header: 0x10: 0x00000000 0x00000000 0x00010100 0x22800111 0x20: 0x08000000 0x08a10891 0x08900000 0x08afffff 0x30: 0x00000000 0x00000080 0x00000000 0x000300ff Base address register at 0x10 not implemented(?) Base address register at 0x14 not implemented(?) Primary bus number: 0x00 Secondary bus number: 0x01 Subordinate bus number: 0x01 Secondary bus latency timer: 0x00 Secondary status register: 0x2280 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: on Data parity error detected: off DEVSEL timing: medium (0x1) Signaled Target Abort: off Received Target Abort: off Received Master Abort: on System Error: off Parity Error: off I/O region: base register: 0x11 limit register: 0x01 base upper 16 bits register: 0x0000 limit upper 16 bits register: 0x0000 Memory region: base register: 0x0000 limit register: 0x0800 Prefetchable memory region: base register: 0x0891 limit register: 0x08a1 base upper 32 bits register: 0x08900000 limit upper 32 bits register: 0x08afffff Capability list pointer: 0x80 Expansion ROM Base Address: 0x00000000 Interrupt line: 0xff Interrupt pin: 0x00 (none) Bridge control register: 0x0003 Parity error response: on Secondary SERR forwarding: on ISA enable: off VGA enable: off Master abort reporting: off Secondary bus reset: off Fast back-to-back capable: off Capability register at 0x80 type: 0x01 (Power Management, rev. 1.0) Capability register at 0x90 type: 0x06 (CompactPCI Hot-swapping) Capability register at 0xa0 type: 0x03 (VPD) Device-dependent header: 0x40: 0x02000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0xf6029001 0x00c00000 0x00000000 0x00000000 0x90: 0x0000a006 0x00000000 0x00000000 0x00000000 0xa0: 0x80000003 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00111109 0xffff0004 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00213388 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. HiNT HB1 PCI-PCI Bridge (PCI bridge, revision 0x13) at ? dev 22 function 0 (intrswiz 0, intrpin 0, i/o on, mem on, no quirks): HiNT HB1 PCI-PCI Bridge (rev. 0x13) pci1 at ppb0 bus 1 S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 8 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 8 function 0 (intrswiz 0x8, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 9 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 9 function 0 (intrswiz 0x9, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 10 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 10 function 0 (intrswiz 0xa, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 11 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 11 function 0 (intrswiz 0xb, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 12 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 12 function 0 (intrswiz 0xc, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 13 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 13 function 0 (intrswiz 0xd, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 14 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 14 function 0 (intrswiz 0xe, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 15 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 15 function 0 (intrswiz 0xf, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 24 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 24 function 0 (intrswiz 0x18, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 25 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 25 function 0 (intrswiz 0x19, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 26 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 26 function 0 (intrswiz 0x1a, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 27 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 27 function 0 (intrswiz 0x1b, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 28 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 28 function 0 (intrswiz 0x1c, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 29 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 29 function 0 (intrswiz 0x1d, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 30 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 30 function 0 (intrswiz 0x1e, intrpin 0, i/o on, mem on, no quirks) not configured S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 31 function 0: PCI configuration registers: Common header: 0x00: 0x88c15333 0x02000003 0x00010000 0x00000000 Vendor Name: S3 (0x5333) Device Name: 86C864-1 ("Vision864") (0x88c1) Command register: 0x0003 I/O space accesses: on Memory space accesses: on Bus mastering: off Special cycles: off MWI transactions: off Palette snooping: off Parity error checking: off Address/data stepping: off System error (SERR): off Fast back-to-back transactions: off Interrupt disable: off Status register: 0x0200 Capability List support: off 66 MHz capable: off User Definable Features (UDF) support: off Fast back-to-back capable: off Data parity error detected: off DEVSEL timing: medium (0x1) Slave signaled Target Abort: off Master received Target Abort: off Master received Master Abort: off Asserted System Error (SERR): off Parity error detected: off Class Name: prehistoric (0x00) Subclass Name: VGA (0x01) Interface: 0x00 Revision ID: 0x00 BIST: 0x00 Header Type: 0x00 (0x00) Latency Timer: 0x00 Cache Line Size: 0x00 Type 0 ("normal" device) header: 0x10: 0x07800000 0x00000000 0x00000000 0x00000000 0x20: 0x00000000 0x00000000 0x00000000 0x00000000 0x30: 0x089f0000 0x00000000 0x00000000 0x00000000 Base address register at 0x10 type: 32-bit nonprefetchable memory base: 0x07800000, size: 0x00800000 Base address register at 0x14 not implemented(?) Base address register at 0x18 not implemented(?) Base address register at 0x1c not implemented(?) Base address register at 0x20 not implemented(?) Base address register at 0x24 not implemented(?) Cardbus CIS Pointer: 0x00000000 Subsystem vendor ID: 0x0000 Subsystem ID: 0x0000 Expansion ROM Base Address: 0x089f0000 Reserved @ 0x34: 0x00000000 Reserved @ 0x38: 0x00000000 Maximum Latency: 0x00 Minimum Grant: 0x00 Interrupt pin: 0x00 (none) Interrupt line: 0x00 Device-dependent header: 0x40: 0x00000000 0x00000000 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 Don't know how to pretty-print device-dependent header. S3 86C864-1 ("Vision864") (VGA prehistoric) at pci1 dev 31 function 0 (intrswiz 0x1f, intrpin 0, i/o on, mem on, no quirks) not configured isa0 at pcib0 lpt0 at isa0 port 0x3bc-0x3bf irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 attimer0 at isa0 port 0x40-0x43: AT Timer pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) spkr0 at pcppi0 isabeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support pcppi0: attached to attimer0 wss0 at isapnp0 port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0 wss0: Crystal CS4232 Sound Chip : broken audio0 at wss0: full duplex, mmap opl at wss0 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0001, , > port 0x200/8 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0002, , 4232> port 0x10/8 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0003, , > port 0x330/2 irq 9 not configured isapnp0: <Crystal CS4232 Sound Chip, CSC0004, , CD-ROM> port 0x10/4 not configured biomask 800004e netmask 800004e ttymask 800004e scsibus0: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: <CONNER, CFP2105S 2.14GB, 1524> disk fixed sd0: 2048 MB, 3940 cyl, 10 head, 106 sec, 512 bytes/sect x 4194304 sectors sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers, tagged queueing cd0 at scsibus0 target 3 lun 0: <IBM, CDRM00203\000\000\000\000\000!K, BZ26> cdrom removable cd0: sync (200.00ns offset 8), 8-bit (5.000MB/s) transfers boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs Mon Jan 21 17:47:08 GMT 2008 swapctl: adding /dev/sd0b as swap device at priority 0 Checking for botched superblock upgrades: done. Starting file system checks: /dev/rsd0a: file system is clean; not checking /dev/rsd0f: file system is clean; not checking /dev/rsd0g: file system is clean; not checking Setting tty flags. Setting sysctl variables: Starting network. Hostname: justice.fool IPv6 mode: host Configuring network interfaces: pcn0. add net default: gateway 192.168.1.21 Adding interface aliases: Building databases... Starting syslogd. Checking for core dump... savecore: /dev/wd0a: Device not configured Jan 22 02:47:18 justice savecore: /dev/wd0a: Device not configured Setting date via ntp. Mounting all filesystems... Clearing /tmp. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Starting local daemons:. Updating motd. Starting sshd. postfix/postfix-script: starting the Postfix mail system Starting cron. Tue Jan 22 02:47:34 JST 2008 NetBSD/prep (justice.fool) (tty00) login: