hello. I've been trying to get my RPI3 booting with -current for the past week or so. I was finally able to get it booted and running with a 7.99.55 kernel, but ifconfig didn't work with that kernel. So, I thought i'd try to attach a serial console, using the Adafruit TTL->USB adapter. This combination of things works fine on my RPI model B, but on the RPI3, I just get garbage on the terminal when I plug in the RPI3. The linux documentation says the com port on the RPI3 is different than it's been in the past because of the addition of the bluetooth chip. I tried adding the following lines to cmdline.txt in /boot of the flash media to see if I can get any sensiccal data out of the serial port: enable_uart=1 core_freq=250 But these lines don't seem to help. Any ideas? -thanks -Brian