Raspberry Pi

The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative, the easy fix would be to do the following:

sip.js(1128): uncompensated = uint16(data[0], data[1]);

Please see page 15 of the manual of the BMP180 chip:
https://ae-bst.resource.bosch.com/media

Is your feature request related to a problem? Please describe.

If a printer pauses the print without the user asking it to - for example, on the Prusa MK3S it will pause if the fan speeds are too low - it can leave users clueless. Likewise I guess if a filament sensor triggered.

OctoPrint logs the reason for pausing/cancelling from API calls and plugins, but it doesn't seem to from actio

In raising this issue, I confirm the following:

{please fill the checkboxes, e.g: [X]}

• I have read and understood the contributors guide.
• The issue I am reporting can be replicated.
• The issue I am reporting is directly related to the pivpn installer script.
• The issue I am reporting isn't a dupl

Expected Behaviour

Change the default cron spec in --etcd-snapshot-schedule-cron (default: "0 */12 * * *"):

--k3s-extra-args '--etcd-snapshot-schedule-cron * * * * *'

As implemented in Python in

alphacep/vosk-api@5e46825

Hello everybody,

first of all thank you for this project.

Introductional words

I uses this project to set up a wlan access point for my parents who have a mobile home and are travelling through europe. That said, I am using the WLAN CLIENT option and ethernet is not used for now.
When there is no Wifi around an additional use case for my parents is to connect to 4G networks via a sma

Blynk library version: master branch at 144a90f3bdb66c3b6c03cce0335c1f1e304d91d6
IDE: VS Code + PlatformIO
IDE version: 1.52.1
Board type: ESP8266
Additional modules: Arduino ESP8266

Scenario, steps to reproduce

Blynk.run() blocks if there is no internet connection on the network and connecting to a local server via SSL.
According to my investigation, `BlynkArduinoClientSecure::conn