{{ message }}
Arduino is an open source hardware and software company and maker community. Arduino started in the early 2000s. Popular with electronic makers, Arduino offers a lot of flexibility through an open source system.
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative, the easy fix would be to do the following:
sip.js(1128): uncompensated = uint16(data[0], data[1]);
Please see page 15 of the manual of the BMP180 chip:
https://ae-bst.resource.bosch.com/media
~/go/src/go.googlesource.com/go/src/compress/flate $ tinygo test -c compress/flate && ./flate.test
~/go/src/go.googlesource.com/go/src/compress/flate $ go test -c && ./flate.test
PASS
Golang framework for robotics, drones, and the Internet of Things (IoT)
How to be low-level programmer
A professional collaborative platform for embedded development
Badges should link to pages
JavaScript framework for robotics, drones, and the Internet of Things (IoT)
Blynk library version: master branch at 144a90f3bdb66c3b6c03cce0335c1f1e304d91d6
IDE: VS Code + PlatformIO
IDE version: 1.52.1
Board type: ESP8266
Additional modules: Arduino ESP8266
Blynk.run() blocks if there is no internet connection on the network and connecting to a local server via SSL.
According to my investigation, `BlynkArduinoClientSecure::conn
U8glib library for monochrome displays, version 2
Let's upgrade cheap off-the-shelf robotic mowers to modern, smart RTK GPS based lawn mowing robots!
Multi-purpose serial data visualization & processing program
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA.
DIY split-flap display
OpenBot leverages smartphones as brains for low-cost robots. We have designed a small electric vehicle that costs about $50 and serves as a robot body. Our software stack for Android smartphones supports advanced robotics workloads such as person following and real-time autonomous navigation.
Infrared remote library for ESP8266/ESP32: send and receive infrared signals with multiple protocols. Based on: https://github.com/shirriff/Arduino-IRremote/
Arduino and PlatformIO IDE compatible TFT library optimised for the Raspberry Pi Pico (RP2040), STM32, ESP8266 and ESP32 that supports different driver chips
OSI Layer 2 driver for nRF24L01 on Arduino & Raspberry Pi/Linux Devices
Created by Massimo Banzi
Released 2003
Is your feature request related to a problem? Please describe.
No response
Are you looking for hardware support?
No response
Describe the feature you want
I use POWER_LOSS_RECOVERY (along with NOZZLE_PARK_FEATURE) to save the current job state on the SD card. That way, I can turn off my printer overnight and resume the next day, for obvious safety concerns.
I noticed this m