|
→Chips and modules: Used proper ± signs in voltage tolerance ranges.
|
→Alternatives: Spelling substantialy -> substantially
|
||
| Line 117: | Line 117: | ||
[[RDRAM]] is a particularly expensive alternative to DDR SDRAM, and most manufacturers have dropped its support from their chipsets. |
[[RDRAM]] is a particularly expensive alternative to DDR SDRAM, and most manufacturers have dropped its support from their chipsets. |
||
DDR1 memory's prices have |
DDR1 memory's prices have substantially increased since Q2 2008 while DDR2 prices are reaching an all-time low. In January 2009, 1GiB DDR1 is 2-3 times more expensive than 1GiB DDR2. |
||
==MDDR== |
==MDDR== |
||
|
Dynamic random-access memory (DRAM)
| |
|---|---|
| Asynchronous |
|
| Synchronous |
|
| Graphics |
|
| Rambus |
|
| Memory modules |
|
| Lists |
|
DDR SDRAM (double-data-rate synchronous dynamic random access memory) is a class of memory integrated circuits used in computers. It achieves nearly twice the bandwidth of the preceding [single data rate] SDRAMbydouble pumping (transferring data on the rising and falling edges of the clock signal) without increasing the clock frequency.
With data being transferred 64 bits at a time, DDR SDRAM gives a transfer rate of (memory bus clock rate) × 2 (for dual rate) × 64 (number of bits transferred) / 8 (number of bits/byte). Thus with a bus frequency of 100 MHz, DDR SDRAM gives a maximum transfer rate of 1600 MB/s.
JEDEC has set standards for data rates of DDR SDRAM, divided into two parts: The first specification is for memory chips and the second is for memory modules. As DDR-SDRAM is superseded by the newer DDR2 SDRAM, the older DDR version is sometimes referred to as DDR1-SDRAM.
| Standard name | Memory clock | Cycle time | I/O Bus clock | Data transfers per second | JEDEC standard VDDQ voltage | Module name | Peak transfer rate |
| DDR-200 | 100 MHz | 10 ns[1] | 100 MHz | 200 Million | 2.5±0.2 V | PC-1600 | 1600 MB/s |
| DDR-266 | 133 MHz | 7.5 ns | 133 MHz | 266 Million | 2.5±0.2 V | PC-2100 | 2100 MB/s |
| DDR-333 | 166 MHz | 6 ns | 166 MHz | 333 Million | 2.5±0.2 V | PC-2700 | 2700 MB/s |
| DDR-400 | 200 MHz | 5 ns | 200 MHz | 400 Million | 2.6±0.1 V | PC-3200 | 3200 MB/s |
Note: All above listed are specified by JEDEC as JESD79.[2] All RAM data rates in-between or above these listed specifications are not standardized by JEDEC — often they are simply manufacturer optimizations using higher-tolerance or overvolted chips.
The package sizes in which DDR SDRAM is manufactured are also standardized by JEDEC.
There is no architectural difference between DDR SDRAM designed for different clock frequencies, e.g. PC-1600 (designed to run at 100 MHz) and PC-2100 (designed to run at 133 MHz). The number simply designates the data rate that the chip is guaranteed to run at, hence DDR SDRAM is guaranteed to run at lower[3] and can possibly run at higher clock rates than those for which it was made. These practices are known as "underclocking" and "overclocking" respectively.
DDR SDRAM for desktop computers DIMMs have 184 pins (as opposed to 168 pins on SDRAM, or 240 pins on DDR2 SDRAM), and can be differentiated from SDRAM DIMMs by the number of notches (DDR SDRAM has one, SDRAM has two). DDR for notebook computers SO-DIMMs have 200 pins which is the same number of pins as DDR2 SO-DIMMs. These two specifications are notched very similarly and care must be taken during insertion when you are unsure of a correct match. DDR SDRAM operates at a voltage of 2.5 V, compared to 3.3 V for SDRAM. This can significantly reduce power consumption. Chips and modules with DDR-400/PC-3200 standard have a nominal voltage of 2.6 Volt.
Many new chipsets use these memory types in dual-channel configurations, which doubles or quadruples the effective bandwidth.
Module and chip characteristics are inherently linked.
Total module capacity is a product of one chip's capacity by the number of chips. ECC modules multiply it by 8/9 because they use one bit per byte for error correction. A module of any particular size can therefore be assembled either from 32 small chips (36 for ECC memory), or 16(18) or 8(9) bigger ones.
DDR memory bus width per channel is 64 bits (72 for ECC memory). Total module bit width is a product of bits per chip by number of chips. It also equals number of ranks (rows) multiplied by DDR memory bus width. Consequently a module with greater amount of chips or using x8 chips instead of x4 will have more ranks.
| Module size | Number of chips | Chip size | Chip organization | Number of rows (ranks) |
|---|---|---|---|---|
| 1GB | 36 | 256 Mbit | 64M x 4 | 2 |
| 1 GB | 18 | 512 Mbit | 64M x 8 | 2 |
| 1 GB | 18 | 512 Mbit | 128M x 4 | 1 |
This example compares different real-world server memory modules with a common size of 1 GB. One should definitely be careful buying 1 GB memory modules, because all these variations can be sold under one price position without stating whether they are x4 or x8, single or dual ranked.
There is a common belief that number of module rows or ranks equals number of sides. As above data shows, this is not true. One can find (2-side, 1-rank) or (2-side, 4-rank) modules. One can even think of 1-side, 2-rank memory module having 16(18) chips on single side x8 each, but it's unlikely such a module was ever produced.
In this context High Density memory means non-ECC 184 pin SDRAM memory.
PC3200 is DDR SDRAM specified to operate at 200 MHz using DDR-400 chips with a bandwidth of 3,200 MB/s. As DDR stands for Double Data Rate this means that the effective clock rate of PC3200 memory is 400 MHz.
1 GB PC3200 non-ECC modules are usually made with 16 512 Mbits chips, 8 down each side (512 Mbit x 16 chips) / (8 bits (per Byte)) = 1024 MBytes. The individual chips making up a 1 GByte memory module are usually organized with 64M bits and a data width of 8 bits for each chip, commonly expressed as 64M x 8. Memory manufactured in this way is low density RAM and will usually be compatible with any motherboard specifying PC3200 DDR-400 memory.
In the context of the 1 GB non-ECC PC3200 SDRAM module there is very little visually to differentiate Low Density from High Density RAM. High Density DDR RAM modules will, like their Low Density counterparts, usually be double sided with eight 512 Mb chips per side. The difference is that each chip, instead of being organized in a 64M x 8 configuration is organized with 128M bits and a data width of 4 bits, or 128M x 4. To further confuse the issue, some RAM is labeled as 128M x 8, and is also called high density.
Most High Density PC3200 modules are assembled using Samsung chips. These chips come in both the familiar 22 x 10mm (approx) TSOP2 and smaller squarer 12 x 9mm (approx) FBGA package sizes. High density Samsung chips can be identified by the numbers on each chip. If the sixth and seventh characters are "04" (for example K4H510438D-UCCC) then the chips are x 4 and High Density. If the sixth and seventh characters are "08" then the chips are x 8 and Low Density.
High Density RAM devices were designed to be used in registered memory modules for servers. As a result, Performance or response times may suffer when used on a desktop or workstation. JEDEC standards do not apply to high-density DDR RAM in desktop implementations. JEDEC's technical documentation however supports 128Mb X 4Mb semiconductors as such that contradicts 128X4 being classified as high density. As such "High Density" is a relative term which can be used to describe memory which is not supported by a particular motherboard's memory controller.
DDR (DDR1) has been superseded by DDR2 SDRAM, which has some modifications to allow higher clock frequency, but operates on the same principle as DDR. Competing with DDR2 are Rambus XDR DRAM. DDR2 has become the standard, as XDR is lacking support. DDR3 SDRAM is a new standard that offers even higher performance and new features.
DDR's prefetch buffer depth is 2 bits; DDR2 uses 4 bits. Although the effective clock rates of DDR2 are higher than for DDR, the overall performance was no greater in the early implementations, primarily due to the high latencies of the first DDR2 modules. DDR2 started to be effective by the end of 2004, as modules with lower latencies became available.[5]
Memory manufacturers have stated that it is impractical to mass-produce DDR1 memory with effective clock rates in excess of 400 MHz. DDR2 picks up where DDR1 leaves off, and is available at clock rates of 400 MHz and higher.
RDRAM is a particularly expensive alternative to DDR SDRAM, and most manufacturers have dropped its support from their chipsets.
DDR1 memory's prices have substantially increased since Q2 2008 while DDR2 prices are reaching an all-time low. In January 2009, 1GiB DDR1 is 2-3 times more expensive than 1GiB DDR2.
MDDR is an acronym that some enterprises use for Mobile DDR SDRAM, a type of memory used in some portable electronic devices, like mobile phones, handhelds, and digital audio players. While standard DDR SDRAM operates at a voltage of 2.5 V, MDDR operates at voltage of 1.8 V, which allows a reduced power consumption.
