Contents

Electrode array: Difference between revisions

Revision as of 13:11, 19 June 2017

Anelectrode array is a configuration of electrodes used for measuring either an electric currentorvoltage. Some electrode arrays can operate in a bidirectional fashion, in that they can also be used to provide a stimulating pattern of electric currentorvoltage.

Common arrays include:

• Schlumberger (Wenner)
• Wenner alpha
• Wenner beta
• Wenner gamma
• Pole-pole
• Dipole-dipole
• Pole-dipole
• Equatorial dipole-dipole

Resistivity

Resistivity measurement of bulk materials is a frequent application of electrode arrays. The figure shows a Wenner array, one of the possible ways of achieving this.^[1] Injecting the current through electrodes separate from those being used for measurement of potential has the advantage of eliminating any inaccuracies caused by the injecting circuit resistance, particularly the contact resistance between the probe and the surface, which can be high. Assuming the material is homogenous, the resistivity is given by:

${\displaystyle \rho =2\pi a{\frac {V}{I}}}$

Electrode arrays are widely used to measure resistivity in geophysics applications.^[2] It is also used in the semiconductor industry to measure the bulk resistivity of silicon wafers, which in turn can be taken as a measure of the doping that has been applied to the wafer, before further manufacturing processes are undertaken.^[3]

See also

• Four-terminal sensing
• Multielectrode array
• Electrical resistivity measurement of concrete

References

• Karl Lark-Horovitz, Vivian Annabelle Johnson, Methods of experimental physics: Solid state physics, Academic Press, 1959 ISBN 0-12-475946-7.
• Loke, M.H. (2004). Tutorial: 2-D and 3-D electrical imaging surveys (PDF). Retrieved 2007-06-11.
• John Milsom, Field geophysics, John Wiley and Sons, 2003 ISBN 0-470-84347-0.

This electronics-related article is a stub. You can help Wikipedia by expanding it.