|
No edit summary
|
+link
|
||
| Line 2: | Line 2: | ||
'''Ellacombe apparatus''' is a method for performing [[change ringing]] of [[church bells]] requiring only one person. Unlike the traditional method, where the bells are spun 360 degrees to sound them and one person is needed for each bell, instead the bells are kept static and a hammer is struck against the inside of the bell. Each hammer is connected by a rope to a fixed frame in the bell-ringing room. The ropes are taut, and yanking one of the ropes will strike the hammer against the bell. |
'''Ellacombe apparatus''' is a method for performing [[change ringing]] of [[church bells]] requiring only one person. Unlike the traditional method, where the bells are spun 360 degrees to sound them and one person is needed for each bell, instead the bells are kept static and a hammer is struck against the inside of the bell. Each hammer is connected by a rope to a fixed frame in the bell-ringing room. The ropes are taut, and yanking one of the ropes will strike the hammer against the bell. |
||
The system was devised by Reverend Henry Thomas Ellacombe of Gloucestershire, who first had such a system installed in [[Bitton]] in 1821. It is believed he created the system to make bell-ringers redundant, so churches did not have to tolerate the behaviour of unruly bell-ringers just so they could have their bells expertly rung. |
The system was devised by Reverend [[Henry Thomas Ellacombe]] of Gloucestershire, who first had such a system installed in [[Bitton]] in 1821. It is believed he created the system to make bell-ringers redundant, so churches did not have to tolerate the behaviour of unruly bell-ringers just so they could have their bells expertly rung. |
||
The Ellacombe apparatus has been removed from many towers in the [[UK]], but there are still visible holes in the ceiling which the ropes would come through into the ringing chamber, and often the frames are still in the ringing chamber, without ropes. In towers where the apparatus remains intact, it is generally used like a [[Carillon]] to play tunes. |
The Ellacombe apparatus has been removed from many towers in the [[UK]], but there are still visible holes in the ceiling which the ropes would come through into the ringing chamber, and often the frames are still in the ringing chamber, without ropes. In towers where the apparatus remains intact, it is generally used like a [[Carillon]] to play tunes. |
||
 |
This article is an orphan, as no other articles link to it. Please introduce links to this page from related articles; try the Find link tool for suggestions. (February 2009)
|
Ellacombe apparatus is a method for performing change ringingofchurch bells requiring only one person. Unlike the traditional method, where the bells are spun 360 degrees to sound them and one person is needed for each bell, instead the bells are kept static and a hammer is struck against the inside of the bell. Each hammer is connected by a rope to a fixed frame in the bell-ringing room. The ropes are taut, and yanking one of the ropes will strike the hammer against the bell.
The system was devised by Reverend Henry Thomas Ellacombe of Gloucestershire, who first had such a system installed in Bitton in 1821. It is believed he created the system to make bell-ringers redundant, so churches did not have to tolerate the behaviour of unruly bell-ringers just so they could have their bells expertly rung.
The Ellacombe apparatus has been removed from many towers in the UK, but there are still visible holes in the ceiling which the ropes would come through into the ringing chamber, and often the frames are still in the ringing chamber, without ropes. In towers where the apparatus remains intact, it is generally used like a Carillon to play tunes.
Trevor S Jennings (1991). The Development of British Bell Fittings.
