BMW 3 Series (E36)
Overview
Manufacturer
Production
1990–2000
1992–1999 (North America)
Assembly
Claus Luthe, Pinky Lai, Boyke Boyer
Body and chassis
Front-engine, rear-wheel-drive
Related
Powertrain
Dimensions
2,700 mm (106.3 in)
Length
4,433 mm (174.5 in)[3]
Width
1,710 mm (67.3 in)[3]
Height
1,366–1,390 mm (53.8–54.7 in)[3]
1,175–1,635 kg (2,590–3,605 lb)
Chronology
Predecessor
Successor
The third generation of the BMW 3 Series range of compact executive cars is designated under the model code E36, and was produced by the German automaker BMW from 1990 to 2000. The initial models were of the four-door sedan body style, followed by the coupé, convertible, wagon ("Touring"), and eventually hatchback ("Compact").
The E36 was the first 3 Series to be offered in a hatchback body style. It was also the first 3 Series to be available with a six-speed manual transmission (in the 1996 M3), a five-speed automatic transmission, and a four-cylinder diesel engine. The multi-link rear suspension was also a significant upgrade as compared to the previous generations of the 3 Series. All-wheel drive was not available for the E36, unlike the previous (E30) and successive (E46) generations.
The E36 was named in Car and Driver magazine's 10Best list for every year it was on sale.[4]
Following the introduction of its successor, the E46 3 Series in 1998, the E36 began to be phased out and was eventually replaced in 1999.
Development of the E36 began in 1981[5] and the exterior design was heavily influenced by aerodynamics, specifically the overall wedge shape, headlight covers and smaller wing mirrors.[6] The lead designers were Pinky Lai[7] and Boyke Boyer.[8][9]
The production version of the E36 was launched in October 1990, with press release in November and market launch in early 1991.[10] The Touring (E36/3) did not go on sale until March 1995, with the Touring version of the previous generation having remained on sale until April 1994 alongside the E36 sedans and coupés.[11] At first, the Touring was only offered in 320i and 328i versions; in July 1995 the 318 tds Touring arrived, followed by the 318i in September.[11]
The body styles of the range are:
All models are rear-wheel drive since the E36 was not produced with all-wheel drive (unlike its predecessor and successor). The E36 chassis was all new, using the "Z-axle" multilink suspension proven in the 1989 BMW Z1, and designed with rear toe-in to minimize the oversteering characteristics of the preceding generation.[18] Unlike the other body styles, the hatchback (known as the "E36/5" or "BMW Compact") used a rear semi-trailing arm suspension based on the older E30 instead, in order to save space due to its truncated rear end.
The E36 was produced with the following transmissions:
Available safety equipment included a driver's airbag, passenger airbag (from 1993 production) and side impact airbags in later models,[19] ABS braking and stability control ("ASC +T").[20] The dashboard was designed to accommodate the passenger side airbag from the beginning, which limited the size of the glove compartment.[21] Available in the sedan and Touring, a rear seat with two integrated children's booster seats was a first for BMW.[11]
Electronic climate control was also available on the E36. In North America, cars equipped with the "Winter Package" also have heated seats and side mirrors.
The four-cylinder petrol engines used in the E36 range were initially engines carried over from the previous generation 3 Series: the BMW M40 SOHC engine and the BMW M42 DOHC engine. In 1993, the M40 was replaced by the BMW M43 SOHC engine and the M42 was replaced in 1996 by the BMW M44 DOHC engine. To retain a 50/50 weight distribution (on petrol models), versions fitted with the heavier, six-cylinder engines had the battery relocated to the trunk.[22]
For the six-cylinder models, the E36 was launched with the then-new BMW M50 DOHC petrol engine. In late 1992 the M50TU versions added single-VANOS (variable valve timing), which increased torque (peak power was unchanged). In 1995, the BMW M52 engine replaced the M50TU, resulting in the 328i model replacing the 325i and the addition of a new mid-range 323i model (powered by a 2.5 litre version of the M52).
In 1992, the 3.0 LBMW S50 engine debuted in the E36 M3. In 1995, its capacity was increased to 3.2 L.[23]
Model
Years
Engine
Power
Torque
Notes
316i
1990–1994
M40B16 4-cylinder
1.6 L (1,596 cc)
73 kW (100 hp) at 5,500 rpm
141 N⋅m (104 lb⋅ft) at 4,250 rpm
1993–1999
M43B16 4-cylinder
75 kW (102 hp) at 5,500 rpm
150 N⋅m (111 lb⋅ft) at 3,900 rpm
318i
1990–1993*
M40B18 4-cylinder
1.8 L (1,796 cc)
83 kW (113 hp) at 5,500 rpm
162 N⋅m (119 lb⋅ft) at 4,250 rpm
316i in South Africa
1993–1998
M43B18 4-cylinder
85 kW (115 hp) at 5,500 rpm
168 N⋅m (124 lb⋅ft) at 3,900 rpm
318is
1992–1995
M42B18 4-cylinder
103 kW (140 hp) at 6,000 rpm
175 N⋅m (129 lb⋅ft) at 4,500 rpm
318i in North America
1996–1998
M44B19 4-cylinder
1.9 L (1,895 cc)
181 N⋅m (133 lb⋅ft) at 4,300 rpm
320i
1991–1993
M50B20 6-cylinder
2.0 L (1,991 cc)
110 kW (150 hp) at 5,900 rpm
190 N⋅m (140 lb⋅ft) at 4,700 rpm
1993–1998
M52B20 6-cylinder
190 N⋅m (140 lb⋅ft) at 4,200 rpm
323i
1995–1998
M52B25 6-cylinder
2.5 L (2,494 cc)
125 kW (170 hp) at 5,500 rpm[24]
245 N⋅m (181 lb⋅ft) at 3,950 rpm
325i
1991–1992
M50B25 6-cylinder
141 kW (192 hp) at 5,900 rpm
245 N⋅m (181 lb⋅ft) at 4,700 rpm
1993–1995
M50B25TÜ 6-cylinder
245 N⋅m (181 lb⋅ft) at 4,200 rpm
Coupé sold as 325is in US
328i
1995–1998
M52B28 6-cylinder
2.8 L (2,793 cc)
142 kW (193 hp) at 5,500 rpm
280 N⋅m (207 lb⋅ft) at 3,950 rpm
Coupé sold as 328is in US
M3
1992–1995
S50B30 6-cylinder
3.0 L (2,990 cc)
210 kW (286 hp) at 7,000 rpm
320 N⋅m (236 lb⋅ft) at 3,600 rpm
Euro-spec
1995–1998
S50B32 6-cylinder
3.2 L (3,201 cc)
236 kW (321 hp) at 7,400 rpm
350 N⋅m (258 lb⋅ft) at 3,250 rpm
M3
1995
S50B30US 6-cylinder
3.0 L (2,990 cc)
179 kW (240 hp) at 6,000 rpm
305 N⋅m (225 lb⋅ft) at 4,250 rpm
US-spec
1996–1999
S52B32 6-cylinder
3.2 L (3,152 cc)
320 N⋅m (236 lb⋅ft) at 3,800 rpm
Model
Years
Engine
Power
Torque
318tds
1994–2000
M41D17 4-cylinder
1.7 L (1,665 cc)
66 kW (90 hp) at 4,400 rpm
190 N⋅m (140 lb⋅ft) at 1,900 rpm
325td
1991–1996
M51D25 UL 6-cylinder
2.5 L (2,497 cc)
85 kW (115 hp) at 4,400 rpm
222 N⋅m (164 lb⋅ft) at 2,000 rpm
1996–1998
M51D25TÜ UL 6-cylinder
85 kW (115 hp) at 4,800 rpm
230 N⋅m (170 lb⋅ft) at 2,000 rpm
325tds
1993–1996
M51D25 OL 6-cylinder
105 kW (143 hp) at 4,800 rpm
260 N⋅m (192 lb⋅ft) at 2,200 rpm
1996–1998
M51D25TÜ OL 6-cylinder
105 kW (143 hp) at 4,600 rpm
280 N⋅m (207 lb⋅ft) at 2,200 rpm
Initially, the turbocharged straight-six BMW M51 engine was used in the E36 325td model. In 1993, the 325tds model was released, which added an intercooler to the M51. In 1994, the 318tds model was introduced, powered by the four-cylinder BMW M41 turbocharged and intercooled engine. Diesel engines were only available in sedan, touring and compact body styles. The coupe and convertible only had petrol engines.
The E36 M3 was launched in 1992 and was powered by the BMW S50 and BMW S52 straight-six engines rather than the four-cylinder units used in the E30. Unlike the predecessor, it was no longer a homologation special and was not developed expressly with competition in mind. It was produced in coupé, sedan, and convertible body styles.
E36-based Alpina production began in 1991 with the release of the Alpina B6 2.8/2, with an upgraded M50-derived engine.[25] A Japanese market exclusive B6 2.8/2 wagon was produced between 1996 and 1998.[26]
In 1993, the 2.8/2 was replaced by the B6 3.0, following the introduction of the 3 litre S50 engine that was used in the new M3 models. Alpina models were now offered in convertible and touring form as well, rather than just in coupe and sedan models. Again in 1996, Alpina introduced the B3 3.2, following the S50 engine's upgrade to 3.2 litres. With the new 3.2 models, Alpinas were now based on the 328i and its 2.8L engine, rather than 325i models.[27]
In 1995, the B8 was released. The B8 4.6 was based on the 4 litre V8 from the E34 5-series, put in to a 328i-based shell. BMW V8s had coated bores which meant new blocks had to be cast by BMW specifically for Alpina V8s. [28] Fitting the V8 into the engine bay required numerous adjustments to both the body and engine parts; and even then, it was still a tight fit. The B8 4.6 produced a claimed 333 horsepower and 470 Nm of torque. Production of the B8 4.6 ended in late 1998.
For a short time, Alpina produced the B8 4.0, making 313 horsepower and 410 Nm of torque. Only an estimated 5 models are known to exist, and they were all sold in Japan.
All Alpina models featured Alpina's distinctive 20 spoke rims, as well as optional striping. Alpina models also had special aerodynamic pieces, including an Alpina-branded front lip and rear spoiler. Changes to the interior were also present in Alpina models, including new blue instrument panels, wooden trim, new seats and steering wheel.
The 3 Series Compact range of three-door hatchback models was introduced in 1993, based on a shortened version of the E36 platform. The model code for the hatchback body style is "E36/5" and the model range consisted of 316i, 316g, 318ti, 323ti, and 318tds.
A modified version of the E36 platform was used for the 1996-2002 Z3 roadster (model code E36/7) and coupé (model code E36/8).
The North American model range consisted of the models listed below. The 318i models were powered by the BMW M42 engine until 1995, and later the BMW M44 engine which was used in the 318is model sold in other countries. In North America, the "is" suffix was applied to the coupés.
Sedan
Coupé
Convertible
Compact
318i
1992–1998[a]
1992–1997[b] (318is)
1994–1997
1995–1999
320i
1993–1995[c]
323i
1998–1999 (323is)
1998–1999
325i
1992–1995
1992–1995 (325is)
1994-1995
328i
1996–1998
1996–1999 (328is)
1996–1999
M3
1997–1998
1994–1999[d]
1998–1999[e]
The European model range had more variety than the North American and included diesel engines and the station wagon "Touring" body styles. The European market range had more low-range models than the North American, for example, the 316i and 318i had 8-valve SOHC engines. The M3 was also more expensive and had more horsepower than the North American version.
Sedan
Coupé
Convertible
Touring
Compact
Petrol
316i
1990-1998
1993-1999
1996-1999
1993-2000
316g[a]
1995-2000
318i
1990-1998
1993-1999
1995-1999
318is
1993-1998
1991-1999
318ti
1994-2000
320i
1990-1998
1991-1998
1992-1999
1994-1999
323i
1995-1998
1995-1999
1995-1999
1995-1999
323ti
1997-2000
325i
1990-1995
1990-1995
1992-1995
328i
1995-1998
1994-1999
1994-1999
1994-1999
M3 3.0
1994-1995
1992-1995
1993-1995
M3 3.2
1995-1997
1995-1998
1995-1999
Diesel
318tds
1994-1998
1994-1999
1994-2000
325td
1991-1998
325tds
1993-1998
1994-1999
The E36 was produced in Munich, Germany; Regensburg, Germany; Rosslyn, South Africa; and Spartanburg County, South Carolina, United States.
Local assembly of complete knock-down (CKD) kits was used for cars sold in Uruguay[29] (until 1991), Egypt, Mexico, and Thailand.[30][31][32] The E36 was also built as CKD kits in the Philippines starting from 1994 up until 1997, where production halted due to the 1997 Asian financial crisis.
Joachim Winkelhock competed in the British Touring Car Championship with the 318i and 320i from 1993 to 1995, winning the title in 1993. In the same year, Johnny Cecotto won the German ADAC GT Cup driving an E36 M3.[33] Cecotto won the Super Tourenwagen Cup for BMW in 1994 and 1998, while Winkelhock won in 1995. Steve Soper won the Japanese Touring Car Championshipin1995 with a works BMW 318i.
Geoff Brabham and his younger brother David Brabham won the 1997 AMP Bathurst 1000 at the Mount Panorama CircuitinBathurst, Australia driving a Super Touring BMW 320i for BMW Motorsport Australia.
The 1998 24 Hours Nürburgring was won by a diesel-engined car for the first time – a BMW E36 320d, aided by its diesel engine requiring fewer fuel stops than rivals.[34][35]
Series
1980s
1990s
2000s
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
E87>>
E90>>
E63>>
F01>>
Z4 (E89)>>