Contents

Mix automation

Method to automate process of post-production mixing of music recording

This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. Please help improve this article by introducing more precise citations. (February 2019) (Learn how and when to remove this message)

Part of a serieson
Automation
Automation in general
Banking Building Home Highway system Laboratory Library Broadcast Mix Pool cleaner Pop music Reasoning Semi-automation Telephone Attendant Switchboard Teller machine Vehicular Vending machine
Robotics and robots
Domestic Vacuum cleaner Roomba Lawn mower Guided vehicle Industrial Paint ODD
Impact of automation
Manumation OOL Bias Self-driving cars Technological unemployment Jobless recovery Post-work society Threat
Trade shows and awards
ASP-DAC DAC DATE IEEE Robotics and Automation Award ICCAD
v t e

Inmusic recording, mix automation allows the mixing console to remember the audio engineer's adjustment of faders during the post-production editing process. A timecode is necessary for the synchronization of automation. Modern mixing consoles and digital audio workstations use comprehensive mix automation.

The need for mix automation originates from the 1970s and the changeover from studios mostly using eight-track tape machines to multiple, synchronized 24-track recorders. Mixing could be laborious and require up to four people, and the results could be almost impossible to reproduce. Manufacturers such as Solid State Logic and AMS Neve developed systems that enabled one engineer to oversee every detail of a complex mix, although the computers required to power these desks remained a rarity into the late 1970s.^[1]

According to record producer Roy Thomas Baker, Queen's 1975 single "Bohemian Rhapsody" was one of the first mixes to be done with automation.^[2]

Types[edit]

Voltage Controlled Automation

fader levels are regulated by voltage-controlled amplifiers (VCA). VCAs control the audio level and not the actual fader.

Moving Fader Automation

a motor is attached to the fader, which then can be controlled by the console, digital audio workstation (DAW), or user.

Software Controlled Automation

the software can be internal to the console, or external as part of a DAW. The virtual fader can be adjusted in the software by the user.

MIDI Automation

the communications protocol MIDI can be used to send messages to the console to control automation.

Modes[edit]

Auto Write

used the first time automation is created or when writing over existing automation

Auto Touch

writes automation data only while a fader is touched/faders return to any previously automated position after release

Auto Latch

starts writing automation data when a fader is touched/stays in position after release

Auto Read

digital Audio Workstation performs the written automation

Auto Off

automation is temporarily disabled

All of these include the mute button. If mute is pressed during writing of automation, the audio track will be muted during playback of that automation. Depending on software, other parameters such as panning, sends, and plug-in controls can be automated as well. In some cases, automation can be written using a digital potentiometer instead of a fader.

See also[edit]

• Collaborative real-time editor

References[edit]

• Stanley R. Alten. Audio in Media, sixth edition. Wadsworth, 2002.
• David Miles Huber and Robert Runstein. Modern Recording Techniques, sixth edition. Oxford: Focal Press, 2005.

External links[edit]

Free open source Mix automation software