Contents

External combustion engine

Anexternal combustion engine (EC engine) is a reciprocating heat engine where a working fluid, contained internally, is heated by combustion in an external source, through the engine wall or a heat exchanger. The fluid then, by expanding and acting on the mechanism of the engine, produces motion and usable work.^[1] The fluid is then dumped (open cycle), or cooled, compressed and reused (closed cycle). In these types of engines, the combustion is primarily used as a heat source, and the engine can work equally well with other types of heat sources.

Combustion[edit]

"Combustion" refers to burning fuel with an oxidizer, to supply the heat. Engines of similar (or even identical) configuration and operation may use a supply of heat from other sources such as nuclear, solar, geothermal or exothermic reactions not involving combustion; they are not then strictly classed as external combustion engines, but as external thermal engines.

Working fluid[edit]

The working fluid can be of any composition and the system may be single-phase (liquid only or gas only) or dual-phase (liquid/gas).

Single phase[edit]

Gas is used in a Stirling engine. Single-phase liquid may sometimes be used.^{[clarification needed]}

Dual phase[edit]

Dual-phase external combustion engines use a phase transition to convert temperature to usable work, for example from liquid to (generally much larger) gas. This type of engine follows variants of the Rankine cycle. Steam engines are a common example of dual-phase engines. Another example is engines that use the Organic Rankine cycle.

See also[edit]

References[edit]