Many countries have standardized the labeling of fertilizers to indicate their contents of major nutrients.[1][2] The most common labeling convention, the NPKorN-P-K label, shows the amounts of the chemical elementsnitrogen, phosphorus, and potassium.
Fertilizers are usually labeled with three numbers, as in 18-20-10, indicating the relative content of the primary macronutrients nitrogen (N), phosphorus (P), and potassium (K), respectively.
More precisely, the first number ("N value") is the percentage of elemental nitrogen by weight in the fertilizer; that is, the mass fraction of nitrogen times 100. The second number ("P value") is the percentage by weight of phosphorus pentoxideP 2O 5. The third number ("K value") is the equivalent content of potassium oxideK 2O.[3]
For example, a 15-13-20 fertilizer would contain 15% by weight of nitrogen, 13% by weight of P 2O 5, 20% by weight of K 2O, and 52% of some inert ingredient.
In the U.K., fertilizer labeling regulations allow for reporting the elemental mass fractions of phosphorus and potassium. The regulations stipulate that this should be done in parentheses after the standard N-P-K values, as in "15-30-15
(15-13-13)".[4]
In Australia, macronutrient fertilizers are labeled with an "N-P-K-S" system, which uses elemental mass fractions rather than the standard N-P-K values and includes the amount of sulfur (S) contained in the fertilizer.
[5]
Fertilizers with additional macronutrients (S, Ca, Mg) may add more numbers to the N-P-K ratio to indicate the amount. The additional numbers are similarly reported in the oxide mass fraction form. For example, a Polish fertilizer labeled "NPK (Ca,S) 4-12-12 (14-29)" has an equivalent of 14% soluble calcium oxide and 29% total sulfur trioxide.[6]
The values in an NPK fertilizer label are related to the concentrations (by weight) of phosphorus and potassium elements as follows:
P 2O 5 consists of 56.4% elemental oxygen and 43.6% elemental phosphorus by weight. Therefore, the elemental phosphorus percentage of a fertilizer is 0.436 times its P value.
K 2O consists of 17% oxygen and 83% elemental potassium by weight. Therefore, the elemental potassium percentage is 0.83 times the K value.
The N value in NPK labels represents actual percentage of nitrogen element by weight, so it does not need to be converted.
So, for example, an 18−51−20 fertilizer contains by weight
18% elemental nitrogen,
0.436 × 51 = 22% elemental phosphorus, and
0.83 × 20 = 17% elemental potassium.
As another example, the fertilizer sylvite is a naturally occurring mineral consisting mostly of potassium chloride, KCl. Pure potassium chloride contains one potassium atom (whose atomic mass is 39.09 g/mol) for every chlorine atom (whose atomic mass is 35.45 g/mol). Therefore, pure KCl is 39.09/(39.09 + 35.45) = 52% potassium and 48% chlorine by weight. Its K value is therefore 52/0.83 = 63; that is, a fertilizer that gets all its potassium from K 2O and has the same potassium contents as pure KCl would have to be 63% K 2O. Pure KCl fertilizer would thus be labeled 0-0-63. Since sylvite contains other compounds that contribute no N, P, or K, it is usually labeled 0-0-60.
^Bat and seal guano are lower in fertilizer value than bird guano. see Guano
^George Rehm; Michael Schmitt; John Lamb; Gyes Randall; Lowell Busman (2002). "Understanding Phosphorus Fertilizers". University of Minnesota Extension Service. Archived from the original on 5 September 2013. Retrieved 28 October 2014.
^ abcfrom "Average total N, ammonium N, phosphate and potash content of manure at the time of land application" in Animal Manure As a Plant Nutrient Resource, Bulletin ID-101 (Reviewed 02/05/01), Cooperative Extension Service, Purdue University. West Lafayette, IN 47907 "ID-101". Archived from the original on 12 March 2012. Retrieved 28 October 2014.
