On Wed, 28 Jan 2026 19:08:32 -0000 (UTC), mlelstv%serpens.de@localhost(Michael van Elst)
> raidframe collects raid components of a set automatically, these get identified
> by the serial number in the raid label and you can move the disks (or just the
> images) around without problem.
So, in the non-autoconfig case, reading from "/etc/raidN.conf", the order of the
DISKS section matters only in the initial configuration ('raidctl -C ...') and in
subsequent configurations ('raidctl -c ...') the order doesn't matter anymore, just
which devices are to be used (so with editing, could go from wd0-3,5-8 to sd0-7
if moving from SATA to SAS, for example)?
> Being able to boot from these disks (e.g. having bootloader and root on
> raidframe) is a different topic.
That's not an issue here and even when Autoconfig was enabled on my RAID set,
it was simply 'raidctl -A on raid0'. My RAID is just a datastore.
--
John D. Baker