Acetanilide[7] is an odourless solid chemical of leaf or flake-like appearance. It is also known as N-phenylacetamide, acetanil, or acetanilid, and was formerly known by the trade name Antifebrin.
| |||
| |||
| Names | |||
|---|---|---|---|
| Preferred IUPAC name
N-Phenylacetamide[1] | |||
| Other names
Acetanilide[1] | |||
| Identifiers | |||
| |||
3D model (JSmol) |
|||
| 606468 | |||
| ChEBI | |||
| ChEMBL | |||
| ChemSpider |
| ||
| ECHA InfoCard | 100.002.864 
| ||
| EC Number |
| ||
| 82833 | |||
| KEGG |
| ||
PubChem CID |
|||
| RTECS number |
| ||
| UNII | |||
CompTox Dashboard (EPA) |
|||
| |||
| |||
| Properties[3][4] | |||
| C8H9NO | |||
| Molar mass | 135.166 g·mol−1 | ||
| Odor | Odorless | ||
| Density | 1.219 g/cm3 | ||
| Melting point | 113–115 °C (235–239 °F; 386–388 K) | ||
| Boiling point | 304 °C (579 °F; 577 K) | ||
| <0.56 g/100 mL (25 °C) | |||
| Solubility | Soluble in ethanol, diethyl ether, acetone, benzene | ||
| log P | 1.16 (23 °C) | ||
| Vapor pressure | 2 Pa (20 °C) | ||
| Acidity (pKa) | 0.5 (25 °C, H2O) (conjugate acid)[2] | ||
| 2.71 | |||
| Hazards[5][6] | |||
| GHS labelling: | |||
| |||
| Warning | |||
| H302 | |||
| P264, P270, P301+P312, P330, P501 | |||
| Flash point | 174 °C (345 °F; 447 K) | ||
| 545 °C (1,013 °F; 818 K) | |||
| Safety data sheet (SDS) | External MSDS | ||
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |||
Acetanilide can be produced by reacting acetic anhydride with aniline:
The preparation used to be a traditional experiment in introductory organic chemistry lab classes,[8] but it has now been widely replaced by the preparation of either paracetamoloraspirin, both of which teach the same practical techniques (especially recrystallization of the product) but which avoid the use of aniline, a suspected carcinogen.
Acetanilide is slightly soluble in water, and stable under most conditions.[5] Pure crystals are plate shaped and appear colorless, white, or in between.
Acetanilide is used as an inhibitorofhydrogen peroxide decomposition and is used to stabilize cellulose ester varnishes. It has also found uses in the intermediation in rubber accelerator synthesis, dyes and dye intermediate synthesis, and camphor synthesis.[9] Acetanilide is used for the production of 4-acetamidobenzenesulfonyl chloride, a key intermediate for the manufacture of the sulfa drugs.[10]
In the 19th century acetanilide was one of a large number of compounds used as experimental photographic developers.
Acetanilide was the first aniline derivative found to possess analgesic as well as antipyretic properties, and was quickly introduced into medical practice under the names of Antifebrin by A. Cahn and P. Hepp in 1886.[11] But its (apparent) unacceptable toxic effects, the most alarming being cyanosis due to methemoglobinemia and ultimately liver and kidney damage,[12] prompted the search for supposedly less toxic aniline derivatives such as phenacetin.[13] After several conflicting results over the ensuing fifty years, it was established in 1948 that acetanilide was mostly metabolizedtoparacetamol (acetaminophen) in the human body, and that it was this metabolite that was responsible for the analgesic and antipyretic properties.[12][14] The observed methemoglobinemia after acetanilide administration was ascribed to the small proportion of acetanilide that is hydrolyzed to aniline in the body.[note 1] Acetanilide is no longer used as a drug, although the efficacy of its metabolite paracetamol (acetaminophen) is well known.
N-Phenyl derivatives of primary amides are called 'anilides' and may be named using the term 'anilide' in place of 'amide' in systematic or retained names of amides. (…) However, names expressing N-substitution by a phenyl group on an amide are preferred IUPAC names.
"Making an old pain and fever medication" by NileRed. YouTube. May 21, 2017.
