Barium hydroxide

Barium hydroxide can be prepared by dissolving barium oxide (BaO) in water:

BaO + H₂O → Ba(OH)₂

It crystallises as the octahydrate, which converts to the monohydrate upon heating in air. At 100 °C in a vacuum, the monohydrate will yield BaO and water.^[3] The monohydrate adopts a layered structure (see picture above). The Ba²⁺ centers adopt a square antiprismatic geometry. Each Ba²⁺ center is bound by two water ligands and six hydroxide ligands, which are respectively doubly and triply bridging to neighboring Ba²⁺ centre sites.^[4] In the octahydrate, the individual Ba²⁺ centers are again eight coordinate but do not share ligands.^[5]

Industrially, barium hydroxide is used as the precursor to other barium compounds. The monohydrate is used to dehydrate and remove sulfate from various products.^[6] This application exploits the very low solubility of barium sulfate. This industrial application is also applied to laboratory uses.

Barium hydroxide is used in analytical chemistry for the titrationofweak acids, particularly organic acids. Its aqueous solution, if clear, is guaranteed to be free of carbonate, unlike those of sodium hydroxide and potassium hydroxide, as barium carbonate is insoluble in water. This allows the use of indicators such as phenolphthaleinorthymolphthalein (with alkaline colour changes) without the risk of titration errors due to the presence of carbonate ions, which are much less basic.^[7]

Barium hydroxide is occasionally used in organic synthesis as a strong base, for example for the hydrolysis of esters^[8] and nitriles,^[9][10][11] and as a base in aldol condensations.

There are several uses for barium hydroxide such as to hydrolyse one of the two equivalent ester groups in dimethyl hendecanedioate.^[12]

Barium hydroxide has also been used, as well, in the decarboxylation of amino acids liberating barium carbonate in the process.^[13]

It is also used in the preparation of cyclopentanone,^[14] diacetone alcohol^[15] and D-gulonic γ-lactone.^[16]

Barium hydroxide decomposes to barium oxide when heated to 800 °C. Reaction with carbon dioxide gives barium carbonate. Its aqueous solution, being highly alkaline, undergoes neutralization reactions with acids. It is especially useful on reactions that require the titrations of weak organic acids. Thus, it forms barium sulfate and barium phosphate with sulfuric and phosphoric acids, respectively. Reaction with hydrogen sulfide produces barium sulfide. Precipitation of many insoluble, or less soluble barium salts, may result from double replacement reaction when a barium hydroxide aqueous solution is mixed with many solutions of other metal salts.^[17]

Reactions of barium hydroxide with ammonium salts are strongly endothermic. The reaction of barium hydroxide octahydrate with ammonium chloride^[18][19]or^[20] ammonium thiocyanate^[20][21] is often used as a classroom chemistry demonstration, producing temperatures cold enough to freeze water and enough water to dissolve the resulting mixture.

Barium hydroxide presents the same hazards such as skin irritation and burns as well as eye damage, just as the other strong bases and as other water-soluble barium compounds: it is corrosive and toxic. ^{[citation needed]}

• Baralyme

• Material Safety Data Sheet (MSDS)