Home  

Random  

Nearby  



Log in  



Settings  



Donate  



About Wikipedia  

Disclaimers  



Wikipedia





Beryllium copper





Article  

Talk  



Language  

Watch  

Edit  





Beryllium copper (BeCu), also known as copper beryllium (CuBe), beryllium bronze, and spring copper, is a copper alloy with 0.5–3% beryllium.[1] Copper beryllium alloys are often used because of their high strength and good conductivity of both heat and electricity.[2] It is used for its ductility, weldabilityinmetalworking, and machining properties. It has many specialized applications in tools for hazardous environments, musical instruments, precision measurement devices, bullets, and some uses in the field of aerospace. Beryllium copper and other beryllium alloys are harmful carcinogens that present a toxic inhalation hazard during manufacturing.

Adjustable Wrench with 'BeCu' on the side, to show that it is made from beryllium copper

Properties

edit

Beryllium copper is a ductile, weldable, and machinable alloy. Like pure copper, it is resistant to non-oxidizing acids (such as hydrochloric acid and carbonic acid) and plastic decomposition products,[further explanation needed]toabrasive wear, and to galling. It can be heat-treated for increased strength, durability, and electrical conductivity.

Beryllium copper attains the greatest strength (up to 1,400 MPa (200,000 psi)) of any copper-based alloy.[3] It has thermal conductivity of 62 Btu/h-ft-°F (107 W/m-K), which is 3–5 times higher than tool steel. It has a solid melting point of 1590 °F (866 °C) and a liquid melting point of 1800 °F (982 °C). It has a high capacity for being hot-formed. C17200 beryllium copper alloy has strength and hardness similar to that of steel; Rockwell hardness properties in its peaked age condition[further explanation needed] are in the range of 200 ksi and RC45.

C17200 has effective corrosion-resistant properties when exposed to harsh conditions such as seawater, and down-hole environments. It will withstand sulphide or chloride stress corrosion cracking and will resist the effects of carbon dioxide and hydrogen embrittlement.

Copper alloys in general have always been considered non-sparking. C17200 has the strength to withstand use in hand and mechanical tools. These non-sparking features are best applied in explosive environments such as in the oil & gas and gunpowder industries.[4]

Toxicity

edit

Inhalation of dust, mist, or fumes containing beryllium can cause chronic beryllium disease, which restricts the exchange of oxygen between the lungs and the bloodstream. The International Agency for Research on Cancer (IARC) lists beryllium as a Group 1 human carcinogen. The National Toxicology Program (NTP) also lists beryllium as a carcinogen. Copper beryllium alloy containing less than 2.5% beryllium (in copper) is not designated as a carcinogen.

Uses

edit
 
Example of a non-sparking tool made of beryllium copper

Beryllium copper is a non-ferrous alloy used in springs, spring wire, load cells, and other parts that must retain their shape under repeated stress and strain. It has high electrical conductivity and is used in low-current contacts for batteries and electrical connectors.

Beryllium copper is non-sparking yet physically tough and nonmagnetic, fulfilling the requirements of ATEX directive for Zones 0, 1, and 2. Beryllium copper screwdrivers, pliers, wrenches, cold chisels, knives, and hammers are available for environments with explosive hazards, such as oil rigs, coal mines, and grain elevators. An alternative metal sometimes used for non-sparking tools is aluminium bronze. Compared to steel tools, beryllium copper tools are more expensive and not as strong, but the properties of beryllium copper in hazardous environments may outweigh the disadvantages. Some of BeCu's varied uses include:

Age-hardened alloy

edit

Beryllium copper (C17200 & C17300) is an age-hardening alloy that attains the highest strength of any copper base alloy. It may be age hardened after forming into springs, intricate forms, or complex shapes. It is valued for its elasticity, corrosion resistance, stability, conductivity, and low creep.

Tempered beryllium copper is C17200 and C17300, which have been age-hardened and cold-drawn. No further heat treatment is necessary beyond possible light stress relief. It is sufficiently ductile to wind on its diameter and can be formed into springs and most shapes. The tempered wire is most useful where the properties of beryllium copper are desired, but the age-hardening of finished parts is not practical.

C17510 and C17500 beryllium copper alloys are age-hardenable and provide good electrical conductivity, physical properties, and wear-resistance. They are used in springs and wire where electrical conduction or retention of properties at elevated temperatures is important.

Specialized variants

edit

High-strength beryllium copper alloys contain as much as 2.7% beryllium (cast), or 1.6-2% beryllium with about 0.3% cobalt (wrought). The strength is achieved by age hardening. The thermal conductivity of these alloys lies between that of steel and aluminum. The cast alloys are frequently formed with injection molds. The wrought alloys are designated by UNS as C17200 to C17400, the cast alloys are C82000 to C82800. The hardening process requires rapid cooling of the annealed metal, resulting in a solid-state solution of beryllium in copper, which is then kept at 200-460 °C for at least an hour, producing a precipitation of metastable beryllide crystals in the copper matrix. Over-aging beyond the equilibrium phase depletes the beryllide crystals and reduces their strength. The beryllides in cast alloys are similar to those in wrought alloys.

High conductivity beryllium copper alloys contain as much as 0.7% beryllium with some nickel and cobalt. The thermal conductivity of these alloys is greater than that of aluminum and slightly less than that of pure copper; they are often used as electrical contacts.[9]

References

edit
  1. ^ "Beryllium Copper". Belmont Metals. 17 May 2017. Retrieved 2023-01-20.
  • ^ "Resources: Standards & Properties - Copper & Copper Alloy Microstructures: Copper Beryllium". www.copper.org. Retrieved 2023-01-20.
  • ^ Bauccio, Michael, ed. (January 1993). ASM Metals Reference Book, Third Edition. Materials Park, Ohio: ASM International. p. 445. ISBN 0-87170-478-1.
  • ^ "C17200 Berryllium Copper". Aviva Metals.
  • ^ "Solving molding problems with beryllium copper: moldmaking. - Free Online Library". www.thefreelibrary.com. Retrieved 2022-07-28.
  • ^ "Federal Law and AP Ammunition". Nucnews.net. Archived from the original on 2009-11-14. Retrieved 2009-11-02.
  • ^ "Bell, Slide and Finish Options | The Schilke Loyalist | Jim Donaldson". www.everythingtrumpet.com. Retrieved 2022-07-28.
  • ^ "Beryllium Copper". Archived from the original on 2009-06-27. Retrieved 2009-05-08.
  • ^ "Feature -- EDMing Beryllium Copper: An Introduction". Mmsonline.com. Archived from the original on 2011-06-14. Retrieved 2010-10-17.
  • edit

    Retrieved from "https://en.wikipedia.org/w/index.php?title=Beryllium_copper&oldid=1221063849"
     



    Last edited on 27 April 2024, at 16:58  





    Languages

     


    Afrikaans
    العربية
    Català
    Dansk
    Deutsch
    Ελληνικά
    Español
    فارسی
    Français

    Lietuvių

    Polski
    Русский
    Svenska
    Türkçe
    Українська
    Tiếng Vit
     

    Wikipedia


    This page was last edited on 27 April 2024, at 16:58 (UTC).

    Content is available under CC BY-SA 4.0 unless otherwise noted.



    Privacy policy

    About Wikipedia

    Disclaimers

    Contact Wikipedia

    Code of Conduct

    Developers

    Statistics

    Cookie statement

    Terms of Use

    Desktop