Adata logger (also dataloggerordata recorder) is an electronic device that records data over time or about location either with a built-in instrumentorsensor or via external instruments and sensors. Increasingly, but not entirely, they are based on a digital processor (or computer), and called digital data loggers (DDL). They generally are small, battery-powered, portable, and equipped with a microprocessor, internal memory for data storage, and sensors. Some data loggers interface with a personal computer and use software to activate the data logger and view and analyze the collected data, while others have a local interface device (keypad, LCD) and can be used as a stand-alone device.
Data logger Cube storing technical and sensor data
Data loggers vary from general-purpose types for a range of measurement applications to very specific devices for measuring in one environment or application type only. It is common for general purpose types to be programmable; however, many remain as static machines with only a limited number or no changeable parameters. Electronic data loggers have replaced chart recorders in many applications.
One of the primary benefits of using data loggers is the ability to automatically collect data on a 24-hour basis. Upon activation, data loggers are typically deployed and left unattended to measure and record information for the duration of the monitoring period. This allows for a comprehensive, accurate picture of the environmental conditions being monitored, such as air temperature and relative humidity.
The cost of data loggers has been declining over the years as technology improves and costs are reduced. Simple single-channel data loggers cost as little as $25. More complicated loggers may cost hundreds or thousands of dollars.
Standardization of protocols and data formats has been a problem but is now growing in the industry and XML, JSON, and YAML are increasingly being adopted for data exchange. The development of the Semantic Web and the Internet of Things is likely to accelerate this present trend.
Several protocols have been standardized including a smart protocol, SDI-12, that allows some instrumentation to be connected to a variety of data loggers. The use of this standard has not gained much acceptance outside the environmental industry. SDI-12 also supports multi-drop instruments. Some data logging companies are also now supporting the MODBUS standard. This has been used traditionally in the industrial control area, and many industrial instruments support this communication standard. Another multi-drop protocol that is now starting to become more widely used is based upon CAN-Bus (ISO 11898). Some data loggers use a flexible scripting environment to adapt themselves to various non-standard protocols.
The terms data logging and data acquisition are often used interchangeably. However, in a historical context, they are quite different. A data logger is a data acquisition system, but a data acquisition system is not necessarily a data logger.
Data loggers typically have slower sample rates. A maximum sample rate of 1 Hz may be considered to be very fast for a data logger, yet very slow for a typical data acquisition system.
Data loggers are implicitly stand-alone devices, while typical data acquisition systems must remain tethered to a computer to acquire data. This stand-alone aspect of data loggers implies onboard memory that is used to store acquired data. Sometimes this memory is very large to accommodate many days, or even months, of unattended recording. This memory may be battery-backed static random access memory, flash memory, or EEPROM. Earlier data loggers used magnetic tape, punched paper tape, or directly viewable records such as "strip chart recorders".
Given the extended recording times of data loggers, they typically feature a mechanism to record the date and time in a timestamp to ensure that each recorded data value is associated with a date and time of acquisition to produce a sequence of events. As such, data loggers typically employ built-in real-time clocks whose published drift can be an important consideration when choosing between data loggers.
Data loggers range from simple single-channel input to complex multi-channel instruments. Typically, the simpler the device the less programming flexibility. Some more sophisticated instruments allow for cross-channel computations and alarms based on predetermined conditions. The newest data loggers can serve web pages, allowing numerous people to monitor a system remotely.
The unattended and remote nature of many data logger applications implies the need for some applications to operate from a DC power source, such as a battery. Solar power may be used to supplement these power sources. These constraints have generally led to ensuring that the devices they market are extremely power efficient relative to computers. In many cases, they are required to operate in harsh environmental conditions where computers will not function reliably.
This unattended nature also dictates that data loggers must be extremely reliable. Since they may operate for long periods nonstop with little or no human supervision and may be installed in harsh or remote locations, it is imperative that so long as they have power, they will not fail to log data for any reason. Manufacturers go to great lengths to ensure that the devices can be depended on in these applications. As such data loggers are almost completely immune to the problems that might affect a general-purpose computer in the same application, such as program crashes and the instability of some operating systems.
Applications
editData logger application for weather station at P2I LIPI
Aflight data recorder (FDR) is a piece of recording equipment used to collect specific aircraft performance data. The term may also be used, albeit less accurately, to describe the cockpit voice recorder (CVR), another type of data recording device found on board aircraft.
Anevent data recorder (EDR) is a device installed by the manufacturer in some automobiles which collects and stores various data during the time-frame immediately before and after a crash.
Avoyage data recorder (VDR) is a data recording system designed to collect data from various sensors on board a ship.
Atrain event recorder is a device that records data about the operation of train controls and performance in response to those controls and other train control systems.
Anaccident data recorder (ADR) is a device for triggering accidents or incidents in most kind of land vehicles and recording the relevant data. In automobiles, all diagnostic trouble codes (DTCs) are logged in engine control units (ECUs) so that at the time of service of a vehicle, a service engineer will read all the DTCs using Tech-2 or similar tools connected to the on-board diagnostics port, and will come to know problems occurred in the vehicle. Sometimes a small OBD data logger is plugged into the same port to continuously record vehicle data.
Inembedded system and digital electronics design, specialized high-speed digital data logger help overcome the limitations of more traditional instruments such as the oscilloscope and the logic analyzer. The main advantage of a data logger is its ability to record very long traces, which proves very useful when trying to correct functional bugs that happen once in while.
In the racing industry, Data Loggers are used to record data such as braking points, lap/sector timing, and track maps, as well as any on-board vehicle sensors.
Data Loggers are changing more rapidly now than ever before. The original model of a stand-alone data logger is changed to one of a device that collects data but also has access to wireless communications for alarming of events, automatic reporting of data, and remote control. Data loggers are beginning to serve web pages for current readings, e-mail their alarms, and FTP their daily results into databases or direct to the users. Very recently, there is a trend to move away from proprietary products with commercial software to open-source software and hardware devices. The Raspberry Pisingle-board computer is among others a popular platform hosting real-time Linux or preemptive-kernel Linux operating systems with many
digital interfaces like I2C, SPI, or UART enable the direct interconnection of a digital sensor and a computer,
and an unlimited number of configurations to show measurements in real-time over the internet, process data, plot charts, and diagrams...
^Riva, Marco; Piergiovanni, Schiraldi, Luciano; Schiraldi, Alberto (January 2001). "Performances of time-temperature indicators in the study of temperature exposure of packaged fresh foods". Packaging Technology and Science. 14 (1): 1–39. doi:10.1002/pts.521. S2CID108566613.
