Helix

The pitch of a helix is the height of one complete helix turn, measured parallel to the axis of the helix.

Adouble helix consists of two (typically congruent) helices with the same axis, differing by a translation along the axis.^[3]

Acircular helix (i.e. one with constant radius) has constant band curvature and constant torsion.

Aconic helix, also known as a conic spiral, may be defined as a spiral on a conic surface, with the distance to the apex an exponential function of the angle indicating direction from the axis.

A curve is called a general helixorcylindrical helix^[4] if its tangent makes a constant angle with a fixed line in space. A curve is a general helix if and only if the ratio of curvaturetotorsion is constant.^[5]

A curve is called a slant helix if its principal normal makes a constant angle with a fixed line in space.^[6] It can be constructed by applying a transformation to the moving frame of a general helix.^[7]

For more general helix-like space curves can be found, see space spiral; e.g., spherical spiral.

Helices can be either right-handed or left-handed. With the line of sight along the helix's axis, if a clockwise screwing motion moves the helix away from the observer, then it is called a right-handed helix; if towards the observer, then it is a left-handed helix. Handedness (orchirality) is a property of the helix, not of the perspective: a right-handed helix cannot be turned to look like a left-handed one unless it is viewed in a mirror, and vice versa.

Inmathematics, a helix is a curve in 3-dimensional space. The following parametrisationinCartesian coordinates defines a particular helix;^[8] perhaps the simplest equations for one is

${\displaystyle {\begin{aligned}x($t)&=\cos(t),\\y(t)&=\sin(t),\\z(t)&=t.\end{aligned}}}  

As the parameter t increases, the point (x(t),y(t),z(t)) traces a right-handed helix of pitch 2π (or slope 1) and radius 1 about the z-axis, in a right-handed coordinate system.

Incylindrical coordinates (r, θ, h), the same helix is parametrised by:

${\displaystyle {\begin{aligned}r($t)&=1,\\\theta (t)&=t,\\h(t)&=t.\end{aligned}}}  

A circular helix of radius a and slope ⁠a/b⁠ (or pitch 2πb) is described by the following parametrisation:

${\displaystyle {\begin{aligned}x($t)&=a\cos(t),\\y(t)&=a\sin(t),\\z(t)&=bt.\end{aligned}}}  

Another way of mathematically constructing a helix is to plot the complex-valued function e^xi as a function of the real number x (see Euler's formula). The value of x and the real and imaginary parts of the function value give this plot three real dimensions.

Except for rotations, translations, and changes of scale, all right-handed helices are equivalent to the helix defined above. The equivalent left-handed helix can be constructed in a number of ways, the simplest being to negate any one of the x, yorz components.

A circular helix of radius a and slope ⁠a/b⁠ (or pitch 2πb) expressed in Cartesian coordinates as^{[citation needed]}

${\displaystyle t\mapsto (a\cos t,a\sin t,bt),t\in [0,T]}$ ^[vague]

has an arc lengthof

${\displaystyle A=T\cdot {\sqrt {a^{2}+b^{2}}},}$ 

acurvatureof

${\displaystyle {\frac {|a|}{a^{2}+b^{2}}},}$ 

and a torsionof

${\displaystyle {\frac {b}{a^{2}+b^{2}}}.}$ 

A helix has constant non-zero curvature and torsion.

A helix is the vector-valued function

$${\displaystyle {\begin{aligned}\mathbf {r} &=a\cos t\mathbf {i} +a\sin t\mathbf {j} +bt\mathbf {k} \\[6px]\mathbf {v} &=-a\sin t\mathbf {i} +a\cos t\mathbf {j} +b\mathbf {k} \\[6px]\mathbf {a} &=-a\cos t\mathbf {i} -a\sin t\mathbf {j} +0\mathbf {k} \\[6px]|\mathbf {v} |&={\sqrt {(-a\sin t)^{2}+(a\cos t)^{2}+b^{2}}}={\sqrt {a^{2}+b^{2}}}\\[6px]|\mathbf {a} |&={\sqrt {(-a\sin t)^{2}+(a\cos t)^{2}}}=a\\[6px]s($$t)&=\int _{0}^{t}{\sqrt {a^{2}+b^{2}}}d\tau ={\sqrt {a^{2}+b^{2}}}t\end{aligned}}}  

So a helix can be reparameterized as a function of s, which must be unit-speed:

$${\displaystyle \mathbf {r} ($$s)=a\cos {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {i} +a\sin {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {j} +{\frac {bs}{\sqrt {a^{2}+b^{2}}}}\mathbf {k} }  

The unit tangent vector is

$${\displaystyle {\frac {d\mathbf {r} }{ds}}=\mathbf {T} ={\frac {-a}{\sqrt {a^{2}+b^{2}}}}\sin {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {i} +{\frac {a}{\sqrt {a^{2}+b^{2}}}}\cos {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {j} +{\frac {b}{\sqrt {a^{2}+b^{2}}}}\mathbf {k} }$$ 

The normal vector is

$${\displaystyle {\frac {d\mathbf {T} }{ds}}=\kappa \mathbf {N} ={\frac {-a}{a^{2}+b^{2}}}\cos {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {i} +{\frac {-a}{a^{2}+b^{2}}}\sin {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {j} +0\mathbf {k} }$$ 

Its curvature is

$${\displaystyle \kappa =\left|{\frac {d\mathbf {T} }{ds}}\right|={\frac {|a|}{a^{2}+b^{2}}}}$$ .

The unit normal vector is

$${\displaystyle \mathbf {N} =-\cos {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {i} -\sin {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {j} +0\mathbf {k} }$$ 

The binormal vector is

$${\displaystyle {\begin{aligned}\mathbf {B} =\mathbf {T} \times \mathbf {N} &={\frac {1}{\sqrt {a^{2}+b^{2}}}}\left(b\sin {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {i} -b\cos {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {j} +a\mathbf {k} \right)\\[12px]{\frac {d\mathbf {B} }{ds}}&={\frac {1}{a^{2}+b^{2}}}\left(b\cos {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {i} +b\sin {\frac {s}{\sqrt {a^{2}+b^{2}}}}\mathbf {j} +0\mathbf {k} \right)\end{aligned}}}$$ 

Its torsion is $${\displaystyle \tau =\left|{\frac {d\mathbf {B} }{ds}}\right|={\frac {b}{a^{2}+b^{2}}}.}$$ 

An example of a double helix in molecular biology is the nucleic acid double helix.

An example of a conic helix is the Corkscrew roller coaster at Cedar Point amusement park.

Some curves found in nature consist of multiple helices of different handedness joined together by transitions known as tendril perversions.

Most hardware screw threads are right-handed helices. The alpha helix in biology as well as the A and B forms of DNA are also right-handed helices. The Z form of DNA is left-handed.

Inmusic, pitch space is often modeled with helices or double helices, most often extending out of a circle such as the circle of fifths, so as to represent octave equivalency.

In aviation, geometric pitch is the distance an element of an airplane propeller would advance in one revolution if it were moving along a helix having an angle equal to that between the chord of the element and a plane perpendicular to the propeller axis; see also: pitch angle (aviation).

•  
  Crystal structure of a folded molecular helix reported by Lehn et al.^[9]
•  
  A natural left-handed helix, made by a climber plant
•  
  A charged particle in a uniform magnetic field following a helical path
•  
  A helical coil spring