This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
The Multi-Color Graphics ArrayorMCGA is a video subsystem built into the motherboard of the IBM PS/2 Model 30, introduced on September 2, 1986, and Model 25, introduced later on August 11, 1987; no standalone MCGA cards were ever made.[2][3][4][5][6][7][8]
| Release date | 1986; 38 years ago (1986) |
|---|---|
| Cards | |
| Entry-level | IBM PS/2 Model 30 & 25 motherboards; Epson Equity Ie motherboard; Delta Computer DG-630 motherboard[1] |
| History | |
| Predecessor | Color Graphics Adapter |
| Successor | Video Graphics Array |
The MCGA supports all CGA display modes plus 640 × 480 monochrome at a refresh rate of 60 Hz, and 320 × 200 with 256 colors (out of an 18-bit RGB palette of 262,144) at 70 Hz. The display adapter uses a DE-15 connector, sometimes referred to as HD-15.
MCGA is similar to VGA in that it had a 256-color mode (the 256-color mode in VGA was sometimes referred to as MCGA) and uses 15-pin analog connectors. The PS/2 chipset's limited abilities prevent EGA compatibility and high-resolution multi-color VGA display modes.
The tenure of MCGA was brief; the PS/2 Model 25 and Model 30 were discontinued by 1992, and the only manufacturer to produce a clone of this display adapter was Epson, in the Equity Ie and PSE-30, since the VGA standard introduced at the same time was considered superior.[9][10]
The 256-color mode proved most popular for gaming. 256-color VGA games ran fine on MCGA as long as they stuck to the basic 320 × 200 256-color mode and didn't attempt to use VGA-specific features such as multiple screen pages.
Games lacking support for 256-color graphics were forced to fall back to four-color CGA mode (or not run at all) due to the incompatibility with EGA video modes (320 × 200, 640 × 200, or 640 × 350, all in 16 colors). Some games, including point-and-click adventures from Sierra On-line and Lucasfilm Games, as well as simulation and strategy titles from Microprose, solved this problem for low-resolution titles by supporting the MCGA's 320 × 200 256-color mode and picking the colors most resembling the EGA 16-color RGB palette, while leaving the other available colors in that mode unused.
Higher resolution titles were often unsupported unless graphics could be converted into either MCGA low or high (640 × 480 monochrome, which would also support 640 × 400 and 640 × 350 with some letterboxing) resolution mode in an acceptable fashion. An alternative approach used by a small number of (generally earlier) games was to use four-color CGA assets but make use of the adapter's ability to freely change the palette for a slightly enhanced appearance.
MCGA offered:
CGA compatible modes: