Home  

Random  

Nearby  



Log in  



Settings  



Donate  



About Wikipedia  

Disclaimers  



Wikipedia





Overpass





Article  

Talk  



Language  

Watch  

Edit  





Anoverpass, called an overbridgeorflyover (for a road only) in the United Kingdom and some other Commonwealth countries, is a bridge, road, railway or similar structure that is over another road or railway. An overpass and underpass together form a grade separation.[1] Stack interchanges are made up of several overpasses.

Highway overpass in Greensboro, North Carolina
Overpass crossing multiple railway lines and roads in Kyoto, Japan
InHong Kong, an overpass is built along a street or road, like Hill Road Flyover, to alleviate traffic between two main roads.

History

edit

The world's first railroad flyover was constructed in 1843 by the London and Croydon RailwayatNorwood Junction railway station to carry its atmospheric railway vehicles over the Brighton Main Line.[2]

Highway and road

edit

In North American usage, a flyover is a high-level overpass, built above main overpass lanes, or a bridge built over what had been an at-grade intersection. Traffic engineers usually refer to the latter as a grade separation. A flyover may also be an extra ramp added to an existing interchange, either replacing an existing cloverleaf loop (or being built in place of one) with a higher, faster ramp that eventually bears left, but may be built as a right or left exit.

A cloverleaf or partial cloverleaf contains some 270 degree loops, which can slow traffic and can be difficult to construct with multiple lanes. Where all such turns are replaced with flyovers (perhaps with some underpasses) only 90 degree turns are needed, and there may be four or more distinct levels of traffic. Depending upon design, traffic may flow in all directions at or near open road speeds (when not congested). For more examples, see Freeway interchange.

Pedestrian

edit

Apedestrian overpass allows traffic to pass without affecting pedestrian safety.

Railway

edit

Railway overpasses are used to replace level crossings (at-grade crossings) as a safer alternative. Using overpasses allows for unobstructed rail traffic to flow without conflicting with vehicular and pedestrian traffic. Rapid transit systems use complete grade separation of their rights of way to avoid traffic interference with frequent and reliable service.

Railroads also use balloon loops and flying junctions instead of flat junctions, as a way to reverse direction and to avoid trains conflicting with those on other tracks.

edit

See also

edit

References

edit
  1. ^ Henry K. Evans (1950). "Read the ebook Traffic engineering handbook by Institute of Traffic Engineers". ENGINEERING HANDBOOK, Second Edition 1950. New Haven, Connecticut: Institute of Traffic Engineers. Archived from the original on March 18, 2012. Retrieved October 9, 2010 – via eBooksRead.com. Search for [Separation, Grade].
  • ^ Turner, J.T. Howard (1977). The London Brighton and South Coast Railway 1. Origins and formation. London: Batsford. p. 249. ISBN 978-0-7134-0275-9 – via Internet Archive.
  • edit

    Retrieved from "https://en.wikipedia.org/w/index.php?title=Overpass&oldid=1233574365"
     



    Last edited on 9 July 2024, at 20:14  





    Languages

     


    العربية

    Беларуская

    Deutsch
    Español
    فارسی
    Français
    Galego

    Bahasa Indonesia
    Italiano
    Latviešu
    Македонски

    Nederlands
    Oʻzbekcha / ўзбекча
    پنجابی
    Polski
    Русский
    Simple English
    Српски / srpski
    Suomi
    ி

    Türkçe
    Tyap
    Українська
    اردو
    Tiếng Vit


     

    Wikipedia


    This page was last edited on 9 July 2024, at 20:14 (UTC).

    Content is available under CC BY-SA 4.0 unless otherwise noted.



    Privacy policy

    About Wikipedia

    Disclaimers

    Contact Wikipedia

    Code of Conduct

    Developers

    Statistics

    Cookie statement

    Terms of Use

    Desktop