Home  

Random  

Nearby  



Log in  



Settings  



Donate  



About Wikipedia  

Disclaimers  



Wikipedia





Relative volatility





Article  

Talk  



Language  

Watch  

Edit  





Relative volatility is a measure comparing the vapor pressures of the components in a liquid mixture of chemicals. This quantity is widely used in designing large industrial distillation processes.[1][2][3] In effect, it indicates the ease or difficulty of using distillation to separate the more volatile components from the less volatile components in a mixture. By convention, relative volatility is usually denoted as .

Relative volatilities are used in the design of all types of distillation processes as well as other separationorabsorption processes that involve the contacting of vapor and liquid phases in a series of equilibrium stages.

Relative volatilities are not used in separation or absorption processes that involve components reacting with each other (for example, the absorption of gaseous carbon dioxide in aqueous solutions of sodium hydroxide).

Definition

edit

For a liquid mixture of two components (called a binary mixture) at a given temperature and pressure, the relative volatility is defined as

 
where:  
  = the relative volatility of the more volatile component   to the less volatile component  
  = the vapor–liquid equilibrium mole fraction of component   in the vapor phase
  = the vapor–liquid equilibrium mole fraction of component   in the liquid phase
  = the vapor–liquid equilibrium concentration of component   in the vapor phase
  = the vapor–liquid equilibrium concentration of component   in the liquid phase
  = Henry's law constant (also called the K valueorvapor-liquid distribution ratio) of a component

When their liquid concentrations are equal, more volatile components have higher vapor pressures than less volatile components. Thus, a   value (=  ) for a more volatile component is larger than a   value for a less volatile component. That means that   ≥ 1 since the larger   value of the more volatile component is in the numerator and the smaller   of the less volatile component is in the denominator.

  is a unitless quantity. When the volatilities of both key components are equal,   = 1 and separation of the two by distillation would be impossible under the given conditions because the compositions of the liquid and the vapor phase are the same (azeotrope). As the value of   increases above 1, separation by distillation becomes progressively easier.

 
Schematic diagram of a typical large-scale industrial distillation column

A liquid mixture containing two components is called a binary mixture. When a binary mixture is distilled, complete separation of the two components is rarely achieved. Typically, the overhead fraction from the distillation column consists predominantly of the more volatile component and some small amount of the less volatile component and the bottoms fraction consists predominantly of the less volatile component and some small amount of the more volatile component.

A liquid mixture containing many components is called a multi-component mixture. When a multi-component mixture is distilled, the overhead fraction and the bottoms fraction typically contain much more than one or two components. For example, some intermediate products in an oil refinery are multi-component liquid mixtures that may contain the alkane, alkene and alkyne hydrocarbons ranging from methane having one carbon atomtodecanes having ten carbon atoms. For distilling such a mixture, the distillation column may be designed (for example) to produce:

Such a distillation column is typically called a depropanizer.

The designer would designate the key components governing the separation design to be propane as the so-called light key (LK) and isobutane as the so-called heavy key (HK). In that context, a lighter component means a component with a lower boiling point (or a higher vapor pressure) and a heavier component means a component with a higher boiling point (or a lower vapor pressure).

Thus, for the distillation of any multi-component mixture, the relative volatility is often defined as

 

Large-scale industrial distillation is rarely undertaken if the relative volatility is less than 1.05.[2]

The values of   have been correlated empirically or theoretically in terms of temperature, pressure and phase compositions in the form of equations, tables or graph such as the well-known DePriester charts.[4]

  values are widely used in the design of large-scale distillation columns for distilling multi-component mixtures in oil refineries, petrochemical and chemical plants, natural gas processing plants and other industries.

See also

edit

References

edit
  1. ^ Kister, Henry Z. (1992). Distillation Design (1st ed.). McGraw-Hill. ISBN 0-07-034909-6.
  • ^ a b Perry, R.H. and Green, D.W. (Editors) (1997). Perry's Chemical Engineers' Handbook (7th ed.). McGraw-Hill. ISBN 0-07-049841-5. {{cite book}}: |author= has generic name (help)CS1 maint: multiple names: authors list (link)
  • ^ Seader, J. D. & Henley, Ernest J. (1998). Separation Process Principles. New York: Wiley. ISBN 0-471-58626-9.
  • ^ DePriester, C. L. (1953), Chem. Eng. Prog. Symposium Series, 7, 49, pages 1-43
  • edit

    Retrieved from "https://en.wikipedia.org/w/index.php?title=Relative_volatility&oldid=1063902759"
     



    Last edited on 5 January 2022, at 14:27  





    Languages

     


    العربية
    Deutsch
    Español
    فارسی
    Nederlands
     

    Wikipedia


    This page was last edited on 5 January 2022, at 14:27 (UTC).

    Content is available under CC BY-SA 4.0 unless otherwise noted.



    Privacy policy

    About Wikipedia

    Disclaimers

    Contact Wikipedia

    Code of Conduct

    Developers

    Statistics

    Cookie statement

    Terms of Use

    Desktop