| |
| |
| Names | |
|---|---|
| Preferred IUPAC name
Prop-2-en-1-amine[1] | |
| Other names
2-Propen-1-amine | |
| Identifiers | |
| |
3D model (JSmol) |
|
| ChEMBL | |
| ChemSpider |
|
| ECHA InfoCard | 100.003.150 
|
| EC Number |
|
PubChem CID |
|
| RTECS number |
|
| UNII | |
| UN number | 2334 |
CompTox Dashboard (EPA) |
|
| |
| |
| Properties | |
| C3H7N | |
| Molar mass | 57.096 g·mol−1 |
| Appearance | Colorless liquid |
| Density | 0.7630 g/cm3, liquid |
| Melting point | −88 °C (−126 °F; 185 K) |
| Boiling point | 55 to 58 °C (131 to 136 °F; 328 to 331 K) |
| Acidity (pKa) | 9.49 (conjugate acid; H2O)[2] |
| Hazards | |
| Occupational safety and health (OHS/OSH): | |
Main hazards |
Lachrymatory |
| GHS labelling: | |
    
| |
| Danger | |
| H225, H301, H310, H315, H319, H330, H335, H371, H373, H411 | |
| P210, P233, P240, P241, P242, P243, P260, P261, P262, P264, P270, P271, P273, P280, P284, P301+P310, P302+P350, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P309+P311, P310, P312, P314, P320, P321, P322, P330, P332+P313, P337+P313, P361, P362, P363, P370+P378, P391, P403+P233, P403+P235, P405, P501 | |
| NFPA 704 (fire diamond) |
|
| Flash point | −28 °C (−18 °F; 245 K) |
| 374 °C (705 °F; 647 K) | |
| Explosive limits | 2-22% |
| Lethal dose or concentration (LD, LC): | |
LD50 (median dose) |
106 mg/kg |
| Related compounds | |
Related amine |
Propylamine |
Related compounds |
Allyl alcohol |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
Allylamine is an organic compound with the formula C3H5NH2. This colorless liquid is the simplest stable unsaturated amine.
All three allylamines, mono-, di-, and triallylamine, are produced by the treating allyl chloride with ammonia followed by distillation.[3] Or by the reaction of allyl chloride with hexamine.[4] Pure samples can be prepared by hydrolysis of allyl isothiocyanate.[5] It behaves as a typical amine.[6]
Polymerization can be used to prepare the homopolymer (polyallylamine) or copolymers. The polymers are promising membranes for use in reverse osmosis.[3]
Diallylamine is a precursor to industrial products. Functionalized allylamines have pharmaceutical applications. Pharmaceutically important allylamines include flunarizine and naftifine; the latter spurred the development of Petasis' borono-Mannich reaction. Flunarizine aids in the relief of migraines while naftifine acts to fight common fungus causing infections such as athlete's foot, jock itch, and ringworm.[7]
Allylamine, like other allyl derivatives is a lachrymator and skin irritant. Its oral LD50 is 106 mg/kg for rats.
| Authority control databases: National |
|
|---|
