Contents

Atada-class minesweeper

JDS Atada
Class overview
Name	Atada
Builders	NKK, Keihin Hitachi, Kanagawa
Preceded by	Ujishima class
Succeeded by	Yashiro class
Built	1955–1956
In commission	1956–1980
Planned	2
Completed	2
Retired	2
General characteristics
Type	Minesweeper
Displacement	240 t (240 long tons) standard 260 t (260 long tons) full load
Length	37.5 m (123 ft 0 in)
Beam	6.8 m (22 ft 4 in)
Draft	2.1 m (6 ft 11 in)
Depth	3.7 m (12 ft 2 in)
Propulsion	2 × diesel electric engines 2 × shafts
Speed	14knots (26 km/h; 16 mph)
Complement	33
Sensors and processing systems	AN/SPS-10 surface-search radar AN/UQS-1D sonar
Armament	1 × single Oerlikon 20 mm gun

The Atada class is a class of coastal minesweepers of the Japan Maritime Self-Defense Force.

Development[edit]

During the Pacific War, a large number of mines were laid in the waters near Japan by both Japan and the United States, which greatly hindered shipping including coastal areas at the end of the war, so the need to deal with this was urgent. For this reason, the minesweeping force was maintained even while the Imperial Japanese Navy was dismantled after the surrender of Japan, and was taken over by the 2nd Ministry of Demobilization on 1 December 1945. After that, minesweepers were absorbed by the Japan Coast Guard, which was established on 1 August 1952, and transferred to the Coastal Security Force.^[1]

Immediately after its inauguration, the guards have been aiming for domestic production of minesweepers, and in 1953, the first year after their inauguration, the construction of three medium-sized minesweepers (MSCs) was included. These three vessels have the characteristics of actual ship experiments, and two systems will be adopted for both the ship type and the main engine. Of these, two vessels adopted the round hull type. On the other hand, it was JDS Yashiro that adopted the square hull form.^[2]

Ships in the class[edit]

Citations[edit]