Barton Highway –Australian Capital Territory | |
|---|---|
 | |
| Exit to Hume Highway from Barton Highway | |
  North end South end
| |
| Coordinates | |
| General information | |
| Type | Highway |
| Length | 52 km (32 mi)[1] |
| Gazetted | August 1928 (as Main Road 56)[2] February 1935 (as State Highway 15)[3] |
| Route number(s) |
 A25 (2013–present)(within ACT) |
| Former route number |
 National Highway 25(1974–2013, within ACT)  National Route 25(1956–1974)  ACT Tourist Route 4 (Nicholls–Lyneham) |
| Major junctions | |
| North end |  Hume HighwayYass, New South Wales |
|
| |
| South end |  Federal Highway Northbourne AvenueLyneham, Australian Capital Territory |
| Location(s) | |
| Major settlements | Murrumbateman, Hall |
| Highway system | |
Barton Highway[4] is a highway in New South Wales and the Australian Capital Territory. It connects CanberratoHume HighwayatYass, and it is part of the route from MelbournetoCanberra. It is named in honour of Sir Edmund Barton, the first Prime Minister of Australia.
Barton Highway commences at the interchange with Hume Highway northeast of Yass and heads in a southerly direction as a four-lane, dual-carriageway freeway, before narrowing to a two-lane, single-carriageway highway south of the interchange with Yass Valley Way where it meets its old alignment, and continues south through undulating hills to the village of Murrumbateman, before crossing the border into the Australian Capital Territory (ACT) just outside the village of Hall, before eventually terminating at the intersection with Federal Highway and Northbourne AvenueatLyneham.
The Gundaroo Drive/Barton Highway round-about is surrounded by a number of trees to the south of the intersection. The pine tree plantation was originally planted in the shape of a map of Australia.
The passing of the Main Roads Act of 1924[5] through the Parliament of New South Wales provided for the declaration of Main Roads, roads partially funded by the State government through the Main Roads Board (later the Department of Main Roads, and eventually Transport for NSW). Main Road No. 56 was declared along this road on 8 August 1928, from Yass via Murrumbateman to Lyneham (and continuing northwards via Cowra to Forbes, Parkes, Dubbo, Gilgandra and Coonamble eventually to Walgett, and southwards via Canberra eventually to the intersection with Queanbeyan-Braidwood Road, today Kings Highway, at Queanbeyan);[2] with the passing of the Main Roads (Amendment) Act of 1929[6] to provide for additional declarations of State Highways and Trunk Roads, this was amended to Trunk Road 56 on 8 April 1929. The original purpose of the Yass-Canberra Road was to connect surrounding towns to farming locations in the Yass Valley, and later with the newly-established national capital.[7]
The Department of Main Roads, which had succeeded the MRB in 1932, declared State Highway 15 on 19 February 1935, from the intersection with Hume Highway near Yass via Murrumbateman to the border of the Federal Capital Territory (today Australian Capital Territory) at Hall, subsuming the existing portion Trunk Road 56 from Yass to Hall;[3] the southern end of Trunk Road 56 was truncated to meet Hume Highway west of Yass, as a result.[3] State Highway 15 was officially named as Barton Highway on 28 July 1954,[8] and fully sealed by 1960.
The first realignment occurred during the late 1970s, when the southern terminus of the highway was relocated north, to the north of the Yowani Country Club.[9] In 1980 the village of Hall was bypassed; and during the early 1990s a dual carriageway was completed on the ACT section of the highway, between Hall and Kaleen. A further section of dual carriageways was completed in December 2002, between Gungahlin Drive and the southern terminus with the Federal Highway.[7]
Between April 1993 and May 1995, as part of the Hume Highway bypass of Yass, a 9-kilometre (5.6 mi) dual carriageway deviation of Barton Highway was constructed to connect Barton Highway with the new alignment of Hume Highway, north of Yass. The new route crosses the Yass River on twin bridges to the east of Cooma Cottage before terminating at a trumpet interchange with Hume Highway, about 3 kilometres (1.9 mi) northeast of Yass.[9] The highway's former alignment, near the historic Cooma Cottage, east of the Yass River, was renamed Kirkton Road and Dog Trap Road.
The passing of the Roads Act of 1993[10] through the Parliament of New South Wales updated road classifications and the way they could be declared within New South Wales. Under this act, Barton Highway today retains its declaration as Highway 15, from the intersection with Hume Highway near Yass to the border of the Australian Capital Territory at Hall.[11]
Barton Highway was signed National Route 25 across its entire length in 1956. The Whitlam government introduced the federal National Roads Act 1974,[12] where roads declared as a National Highway were still the responsibility of the states for road construction and maintenance, but were fully compensated by the Federal government for money spent on approved projects.[12]: S7 As an important interstate link between the capitals of the Australian Capital Territory and Victoria, Barton Highway was declared a National Highway in 1974, and was consequently re-allocated National Highway 25. With both states' conversion to the newer alphanumeric system in 2013, its route number was updated to route A25.[13]
The Barton Highway passes through farmlands and the NSW town of Murrumbateman. In October 2001 the Australian Government announced that they would bypass the town to the east. A$20 million was set aside in the 2006 federal budget for planning and duplication costs associated with the bypass.[14] The same year, the National Roads and Motorists' Association had named the Barton Highway as the worst highway on the Auslink National Network in New South Wales; accounting for three road fatalities annually.[15][16] While 42 kilometres (26 mi) of the 52-kilometre (32 mi) highway are located in New South Wales (NSW), only 6 kilometres (3.7 mi) of the NSW section are dual carriageway.[7]
Various NSW[17] and Federal[18] governments have committed funding towards improvements to the Barton Highway, including a bypass east of Murrumbateman and a staged duplication to create 33 kilometres (21 mi) of dual carriageways.[19] Stage one of construction work has commenced and is scheduled to be completed by 2023.
| State | LGA / District | Location | km[1] | mi | Destinations | Notes |
|---|---|---|---|---|---|---|
| New South Wales | Yass Valley | Yass | 0 | 0.0 | Hume Highway (M31) – Gundagai, Melbourne, Goulburn, Sydney | Northern terminus of highway and route A25 at trumpet interchange |
| Manton | 4.6 | 2.9 | Yass Valley Way – Yass | Dumbbell interchange | ||
| Murrumbateman | 18.3 | 11.4 | Murrumbateman Road – Gundaroo, Bungendore | |||
| Wallaroo | 35.8 | 22.2 | Nanima Road – Nanima | |||
| State border | 40.1 | 24.9 | New South Wales – Australian Capital Territory state border | |||
| Australian Capital Territory | Hall | Hall | 40.2 | 25.0 | Victoria Street – Hall | Former Barton Highway alignment |
| 41.8 | 26.0 | Wallaroo Road – Wallaroo | ||||
| 41.9 | 26.0 | Gladstone Street – Hall | ||||
| 43.1 | 26.8 | Victoria Street – Hall | Former Barton Highway alignment | |||
| Gungahlin | Kinlyside–Nicholls boundary | 43.4 | 27.0 | Kuringa Drive (southwest) – Fraser, Belconnen Clarrie Hermes Drive (northeast) – Ngunnawal | ||
| Gungahlin–Belconnen boundary | Nicholls–Crace–Giralang tripoint | 46.1 | 28.6 | William Slim Drive (southwest) – Belconnen Gundaroo Drive (northeast) – Gungahlin, Gundaroo | Roundabout | |
| Crace–Mitchell–Kaleen tripoint | 49.8 | 30.9 | Gungahlin Drive – Mitchell, Belconnen, Woden | Parclo interchange | ||
| Mitchell–Kaleen–Lyneham tripoint | 50.6 | 31.4 | Ellenborough Street – Kaleen, Lyneham | |||
| Lyneham | 51.4 | 31.9 | Randwick Road – Lyneham | |||
| North Canberra | Lyneham–Downer border | 52.0 | 32.3 | Federal Highway (A23 northeast) – Goulburn Northbourne Avenue (A23 south) – Civic, Capital Hill, Queanbeyan | Southern terminus of highway and route A25 | |
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
| ||||||
New South Wales portal
Australia portal
|
| ||
|---|---|---|
| Controlled-access roads: |
|
|
| Limited-access roads: |
| |
| Bridges: |
| |
| Major interchanges: |
| |
| Related articles: |
| |
*Partially limited-access ^Partially controlled-access roadway under construction | ||
