| Challenger Armoured Repair and Recovery Vehicle | |
|---|---|
A CRARRV in 2012.
| |
| Type | Armoured Recovery Vehicle |
| Place of origin | United Kingdom |
| Service history | |
| In service | 1988 - present |
| Used by |
|
| Wars |
|
| Production history | |
| Designer | Vickers Defence |
| Designed | 1985 |
| Produced | 1988-1993 |
| No. built | 84 |
| Specifications | |
| Mass | 61.2 t (60.2 long tons; 67.5 short tons) |
| Length | 9.61 m (31.5 ft) |
| Width | 3.62 m (11.9 ft) |
| Height | 3.13 m (10.3 ft) |
| Crew | 3 |
| Passengers | 2 |
| Armour | Rolled homogeneous armour and applique armour |
Main | None |
Secondary |
|
| Engine | Perkins-Condor CV12-5C/6C 1200 bhp |
| Transmission | David Brown TN54E |
Operational | 500 km (310 mi) |
| Maximum speed | 59.2 km/h (36.8 mph) |
The Challenger Armoured Repair and Recovery VehicleorCRARRV is a large British armoured recovery vehicle based on the hull of the Challenger 1 main battle tank. The CRARRV is currently operated in conjunction with the Challenger 2 tanks of the British Army and Royal Army of Oman. It is one of the few vehicles capable of repairing and recovering Challenger tanks in the field. Eighty vehicles were delivered to the British between 1988 and 1993; an additional four vehicles were delivered to Oman.[1]
In 1985, the UK MoD ordered a derivative armoured recovery vehicle from Vickers Defence, based on the Challenger 1, to replace those based on the FV4204 Chieftain ARV/ARRV.
The size and performance of the CRARRV are similar to a Challenger 1 tank, but instead of armament it is fitted with:
In order to improve flexibility and supplement the transportation of power packs around the battlefield, the British Army procured a quantity of dedicated CRARRV High Mobility Trailers (HMT). Each HMT enables a CRARRV to transport a single (Challenger, Titan or Trojan) power pack or two Warrior power packs, by altering the configuration of dedicated fixtures and attachment of fittings.
CRARRVs have subsequently been upgraded to use the updated Challenger 2 powertrain consisting of a CV12-5C/6C engine[2] with TN54E transmission.
Each CRARRV has five seats but usually carries a crew of three soldiers from the Royal Electrical and Mechanical Engineers (REME), of the recovery mechanic and vehicle mechanic/technician trades. There is room in the cabin for two further passengers (e.g. crew members of the casualty vehicle) on a temporary basis.
British CRARRVs were first deployed in action in the lead up to the First Gulf War, Operation Granby in 1991.
CRARRVs supported Challenger 1 and later Challenger 2 tanks as part of peacekeeping efforts in Bosnia and Kosovo.
They were subsequently deployed alongside Challenger 2 tanks during the 2003 invasion of Iraq, Operation Telic in 2003.
British CRARRVs were also deployed as part of Operation Herrick, the British contribution to the International Security Assistance Force (ISAF) during the War in Afghanistan where they supported British Challenger 2-derived Titan bridgelayers and Trojan combat engineering vehicles.
In 2020, a CRARRV was used to recover rail vehicles in the aftermath of the Stonehaven derailment.[3]
United Kingdom - 80 in service, subsequently received Challenger 2 powertrain upgrades.
Oman - 4 in service.
Ukraine - Two CRARRVs are to be donated to Ukraine alongside a squadron of Challenger 2 tanks in 2023.[4]|
British armoured fighting vehicles of the post-war era
| |||||
|---|---|---|---|---|---|
| Tanks |
| ||||
| Infantry Fighting Vehicle |
| ||||
| Reconnaissance vehicles |
| ||||
| Armoured Personnel Carriers |
| ||||
| Infantry Mobility Vehicles |
| ||||
| Internal security vehicle |
| ||||
| Tank destroyers |
| ||||
| Self-propelled artillery |
| ||||
| Self-propelled anti-air |
| ||||
| Combat engineering vehicles |
| ||||
| Armoured Recovery Vehicles |
| ||||
| Experimental, prototype, export |
| ||||
