| dyne | |
|---|---|
| Unit system | CGS units |
| Unit of | force |
| Symbol | dyn |
| Conversions | |
| 1 dyn in ... | ... is equal to ... |
| CGS base units | 1 g⋅cm/s2 |
| SI units | 10−5 N |
| British Gravitational System | 2.248089×10−6 lbf |
The dyne (symbol: dyn; from Ancient Greek δύναμις (dúnamis) 'power, force') is a derived unitofforce specified in the centimetre–gram–second (CGS) system of units, a predecessor of the modern SI.
The name dyne was first proposed as a CGS unit of force in 1873 by a Committee of the British Association for the Advancement of Science.[1]
The dyne is defined as "the force required to accelerate a mass of one gram at a rate of one centimetre per second squared".[2] An equivalent definition of the dyne is "that force which, acting for one second, will produce a change of velocity of one centimetre per second in a mass of one gram".[3]
One dyne is equal to 10 micronewtons, 10−5 N or to 10 nsn (nanosthenes) in the old metre–tonne–second system of units.
|
|
newton | dyne | kilogram-force, kilopond |
pound-force | poundal |
|---|---|---|---|---|---|
| 1 N | ≡ 1 kg⋅m/s2 | = 105 dyn | ≈ 0.10197 kp | ≈ 0.22481 lbF | ≈ 7.2330 pdl |
| 1 dyn | = 10−5 N | ≡ 1 g⋅cm/s2 | ≈ 1.0197×10−6 kp | ≈ 2.2481×10−6 lbF | ≈ 7.2330×10−5 pdl |
| 1 kp | = 9.80665 N | = 980665 dyn | ≡ gn × 1 kg | ≈ 2.2046 lbF | ≈ 70.932 pdl |
| 1 lbF | ≈ 4.448222 N | ≈ 444822 dyn | ≈ 0.45359 kp | ≡ gn × 1 lb | ≈ 32.174 pdl |
| 1 pdl | ≈ 0.138255 N | ≈ 13825 dyn | ≈ 0.014098 kp | ≈ 0.031081 lbF | ≡ 1 lb⋅ft/s2 |
| The value of gn (9.80665 m/s2) as used in the official definition of the kilogram-force is used here for all gravitational units. | |||||
The dyne per centimetre is a unit traditionally used to measure surface tension. For example, the surface tension of distilled water is 71.99 dyn/cm at 25 °C (77 °F).[4] (In SI units this is 71.99×10−3 N/mor71.99 mN/m.)
