Contents

EMD GM6C

This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this articlebyintroducing citations to additional sources. Find sources: "EMD GM6C" – news · newspapers · books · scholar · JSTOR (August 2016)

EMD GM6C
Type and origin Power type Electric Builder GM-EMD Serial number 75605-1 Model GM6C Build date May 1, 1975 Total produced 1
Specifications Configuration: ​  • AAR C-C  • UIC Co'Co' Gauge 4 ft 8+1⁄2 in (1,435 mm) Trucks EMD HTC Wheel diameter 42 in (1,067 mm) Length 68 ft 10 in (20.98 m) Width 10 ft (3.05 m) Height 14 ft9+1⁄2 in (4.51 m) (over locked-down pantographs) Loco weight 365,000 lb (165,561 kg) or 182.5 short tons (162.9 long tons; 165.6 t) Electric system/s Switchable: 11 kV 25 Hz, 25 kV 60 Hz, Northeast Corridor Catenary Current pickup(s) Pantograph Generator EMD D79MA75 Traction motors 6 × EMD E88X
Performance figures Power output 6,000 hp (4.47 MW) Tractive effort Starting: 126,000 lbf (560.5 kN); Continuous: 44,000 lbf (195.7 kN) @ 46 mph (74 km/h)
Career Operators Penn Central (later Amtrak and Conrail) Numbers 1975 (later 4975) Locale Northeast Corridor electrified lines Disposition Scrapped

The GM6C was a solitary testbed electric locomotive for freight duties built by General Motors' Electro-Motive Division of the United States in collaboration with ASEAofSweden. It was rolled out from EMD's La Grange, Illinois plant on May 1, 1975.^[1] Equipped with close to standard C-C HTC trucks and traction motors, it was designed for lower-speed drag freight service.

At the time, high oil prices had a number of large US railroads contemplating electrification of their most heavily used lines, while the only major US railroad with freight-hauling electrification, the Penn Central, had a fleet of aging locomotives needing replacement.

Circumstances changed after the GM6C and GM10B locomotives were developed; oil prices declined, which wiped out the interest freight railroads had in electrification, while diesel locomotive power and adhesion were improved.

Meanwhile, the bankruptcy of Penn Central led to the division of the railroad's physical plant between Amtrak, which inherited much of the electrified region, and Conrail. Increased access charges on the part of Amtrak led to Conrail ceasing electric operations in 1982, dismantling the electrification on its lines and avoiding Amtrak-owned rails.^{[citation needed]} The two locomotives were now surplus to requirements and were returned to EMD, remaining in the LaGrange plant's yard until scrapping in the mid-1980s.

The BC Rail GF6C locomotives used similar technology to the GM6C but had a wide-nose cab and carbody.