Contents

Electrostriction

Ability of non-conductive materials to change shape under an electric field

An editor has performed a search and found that sufficient sources exist to establish the subject's notability. Please help improve this articlebyadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Electrostriction" – news · newspapers · books · scholar · JSTOR (June 2024) (Learn how and when to remove this message)

Inelectromagnetism, electrostriction is a property of all electrical non-conductors, or dielectrics, that causes them to change their shape under the application of an electric field. It is the dual property to magnetostriction.

Explanation[edit]

Electrostriction is a property of all dielectric materials, and is caused by displacement of ions in the crystal lattice upon being exposed to an external electric field. Positive ions will be displaced in the direction of the field, while negative ions will be displaced in the opposite direction. This displacement will accumulate throughout the bulk material and result in an overall strain (elongation) in the direction of the field. The thickness will be reduced in the orthogonal directions characterized by Poisson's ratio. All insulating materials consisting of more than one type of atom will be ionic to some extent due to the difference of electronegativity of the atoms, and therefore exhibit electrostriction.

The resulting strain (ratio of deformation to the original dimension) is proportional to the square of the polarization. Reversal of the electric field does not reverse the direction of the deformation.

More formally, the electrostriction coefficient is a rank four tensor (${\displaystyle Q_{ijkl}}$), relating the rank two strain tensor (${\displaystyle x_{ij}}$) and the electric polarization density vector (i.e. rank one tensor; ${\displaystyle P_{m}}$).

${\displaystyle x_{ij}=Q_{ijkl}P_{k}P_{l}}$

The related piezoelectric effect occurs only in a particular class of dielectrics. Electrostriction applies to all crystal symmetries, while the piezoelectric effect only applies to the 20 piezoelectric point groups. Electrostriction is a quadratic effect, unlike piezoelectricity, which is a linear effect.

Materials[edit]

Although all dielectrics exhibit some electrostriction, certain engineered ceramics, known as relaxor ferroelectrics, have extraordinarily high electrostrictive constants. The most commonly used are

• lead magnesium niobate (PMN)
• lead magnesium niobate-lead titanate (PMN-PT)
• lead lanthanum zirconate titanate (PLZT)

Magnitude of effect[edit]

Electrostriction can produce a strain of 0.1% at a field strength of 2 million volts per meter (2 MV/m) for the material called PMN-15 (TRS website listed in the references below). The effect appears to be quadratic at low field strengths (up to 0.3 MV/m) and roughly linear after that, up to a maximum field strength of 4 MV/m ^{[citation needed]}. Therefore, devices made of such materials are normally operated around a bias voltage in order to behave nearly linearly. This will probably cause deformations to lead to a change of electric charge, but this is unconfirmed.

Applications[edit]

• Sonar projectors for submarines and surface vessels
• Actuators for small displacements

See also[edit]

• Magnetostriction
• Photoelasticity
• Piezomagnetism
• Piezoelectricity
• Relaxor ferroelectric

References[edit]

• "Electrostriction." Encyclopædia Britannica.
• Mini dictionary of physics (1988) Oxford University Press
• "Electrostrictive Materials" from TRS Technologies
• "Electronic Materials" by Prof. Dr. Helmut Föll