 |
This article needs additional citations for verification. Please help improve this articlebyadding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Fiber tapping" – news · newspapers · books · scholar · JSTOR (April 2008) (Learn how and when to remove this message) |
Fiber tapping uses a network tap method that extracts signal from an optical fiber without breaking the connection. Tapping of optical fiber allows diverting some of the signal being transmitted in the core of the fiber into another fiber or a detector. Fiber to the home (FTTH) systems use beam splitters to allow many users to share one backbone fiber connecting to a central office, cutting the cost of each connection to the home. Test equipment can simply put a bend in the fiber and extract sufficient light to identify a fiber or determine if a signal is present.
Similar techniques can surreptitiously tap fiber for surveillance, although this is rarely done where electronic equipment used in telecommunication is required to allow access to any phone line for tapping by legal authorization. Tapping the fiber means that all signals from every communications source being routed through the fiber are presented and must be sorted for relevant data, an immense task when thousands of sources of data or voice may be present.
According to reports, the US government used fiber tapping for surveillance following the September 11, 2001 attacks. Also the USS Jimmy Carter, a nuclear submarine, was modified to allow tapping undersea communication cables.[1]
One way to detect fiber tapping is by noting increased attenuation added at the point of tapping. Some systems can detect sudden attenuation on a fiber link and will automatically raise an alarm.[2] There are, however, tappers which allow tapping without significant added attenuation.
In either case, there should be a change of scattering pattern in that point in line, which potentially can be detectable. However, once the tapper has been detected, it may be too late since a part of the information has already been eavesdropped on.[3]
One countermeasure of fiber tapping is encryption, to make the intercepted data unintelligible to the thief.[4] Another is to deploy a fiber-optic sensor into the existing raceway, conduit, or armored cable. In this scenario, it can be detected if someone attempts to physically access the data (copper or fiber infrastructure). A small number[quantify] of alarm systems manufacturers provide a simple way to monitor the optical fiber for physical intrusion. There is also a proven solution that utilizes existing unused fiber (dark fiber) in a multi-strand cable for the purpose of creating an alarm system.
In the alarmed cable scenario, the sensing mechanism uses optical interferometry in which modally dispersive coherent light traveling through the multi-mode fiber mixes at the fiber's terminus, resulting in a characteristic pattern of light and dark splotches called a speckle pattern. The laser speckle is stable as long as the fiber remains immobile, but flickers when the fiber is vibrated. A fiber-optic sensor works by measuring the time dependence of this speckle pattern and applying digital signal processing to the fast Fourier transform (FFT) of the temporal data.
The U.S. government has been concerned about the tapping threat for many years. In the context of classified information on United States Department of Defense (DOD) networks, protective distribution system (PDS) is a set of military instructions and guidelines for network physical protection. PDS is defined as a system of carriers (e.g. raceways, conduits, or ducts) used to distribute military and national security information between two or more controlled areas, or from a controlled area through an area of lesser classification, i.e., outside the sensitive compartmented information facility (SCIF) or other similar area. PDS provides guidance for the protection of SIPRNet wire line and optical fiber to transmit unencrypted classified information.
