The FreeDOS project began on 29 June 1994, after Microsoft announced it would no longer sell or support MS-DOS. Jim Hall – who at the time was a student[13] – posted a manifesto proposing the development of PD-DOS, a public domain version of DOS.[14] Within a few weeks, other programmers including Pat Villani and Tim Norman joined the project. Between them, a kernel (by Villani), the COMMAND.COM command line interpreter (by Villani and Norman), and core utilities (by Hall) were created by pooling code they had written or found available.[15][16] For some time, the project was maintained by Morgan "Hannibal" Toal. There have been many official pre-release distributions of FreeDOS before the final FreeDOS 1.0 distribution.[4] GNU/DOS, an unofficial distribution of FreeDOS, was discontinued after version 1.0 was released.[17][18]
Blinky the Fish is the mascot of FreeDOS. He was designed by Bas Snabilie.[19]
FreeDOS 1.1, released on 2 January 2012,[20] is available for download as a CD-ROM image: a limited install disc that only contains the kernel and basic applications, and a full disc that contains many more applications (games, networking, development, etc.), not available as of November 2011[update] but with a newer, fuller 1.2.[21] The legacy version 1.0 (2006) consisted of two CDs, one of which was an 8 MB install CD targeted at regular users and the other which was a larger 49 MB live CD that also held the source code of the project.[21]
Dell preloaded FreeDOS with its n-series desktops to reduce their cost. The firm has been criticized for making these machines no cheaper, and harder to buy, than identical systems with Windows.[22]
HP provided FreeDOS as an option in its dc5750 desktops, Mini 5101 netbooks and Probook laptops.[23][24][25] FreeDOS is also used as bootable media for updating the BIOS firmware in HP systems.[26]
FreeDOS is included by Steve Gibson's hard drive maintenance and recovery program, SpinRite.[27]
Intel's Solid-State Drive Firmware Update Tool loaded the FreeDOS kernel.[28]
Many motherboard vendors recommend a bootable FreeDOS for running low level BIOS and firmware updates.
FreeDOS is mostly compatible with MS-DOS. It supports COM executables, standard DOS executables and Borland's 16-bit DPMI executables. It is also possible to run 32-bit DPMI executables using DOS extenders. The operating system has several improvements relative to MS-DOS, mostly involving support for newer standards and technologies that did not exist when Microsoft ended support for MS-DOS, such as internationalization, or the Advanced Power Management TSRs.[39] Furthermore, with the use of HX DOS Extender, many Windows Console applications function properly in FreeDOS, as do some rare GUI programs, like QEMM and Bochs.[40]
FreeDOS is able to run Microsoft Windows 1.0 and 2.0 releases. Windows 3.x releases, which had support for i386 processors, cannot fully be run in 386 Enhanced Mode,[41] except partially in the experimental FreeDOS kernel 2037.[citation needed]
Windows 95, Windows 98 and Windows Me use a stripped-down version of MS-DOS. FreeDOS cannot be used as a replacement because the undocumented interfaces between MS-DOS 7.0–8.0 and Windows "4.xx" are not emulated by FreeDOS; however, it can be installed and used beside these systems using a boot manager program, such as BOOTMGR or METAKERN included with FreeDOS.[citation needed]
Windows NT-based operating systems, including Windows 2000, XP, Vista, 7, 8, 8.1, 10 and 11 for desktops, and Windows Server 2003, 2008 and 2008 R2 for servers, do not make use of MS-DOS as a core component of the system. These systems can make use of the FAT file systems which are used by MS-DOS and earlier versions of Windows; however, they typically use the NTFS (New Technology File System) by default for security and other reasons. FreeDOS can co-exist on these systems on a separate partition or on the same partition on FAT systems. The FreeDOS kernel can be booted by adding it to the Windows 2000 or XP's NT Boot Loader configuration file, boot.ini,[42] or the freeldr.ini equivalent for ReactOS.[43]
FreeDOS is designed to work well with virtualization software such as VirtualBox and VMware. Installation process is identical to real hardware. It is also possible to install FreeDOS on DOSBox and its derivatives. By doing so, it provides additional functionality not present in the emulator. [44][45]
FreeDOS's default text editor—a clone of the MS-DOS Editor, with added features
FAT32 is fully supported and is the preferred format for the boot drive.[46] Depending on the BIOS used, up to four Logical Block Addressing (LBA) hard disks of up to 128 GB, or 2 TB, in size are supported.[47] There has been little testing with large disks, and some BIOSes support LBA but produce errors on disks larger than 32 GB; a driver such as OnTrack or EZ-Drive resolves this problem.[citation needed] FreeDOS can also be used with a driver called LFNDOS to enable support for Windows 95-style long file names,[48] but most pre-Windows 95 programs do not support LFNs, even with a driver loaded. There is no planned support for NTFS, ext2orexFAT, but there are several external third-party drivers available for that purpose. To access ext2 file systems, LTOOLS, a counterpart to Mtools, can sometimes be used to copy data to and from ext2 file system drives.[citation needed]
MacCallum, Scott C., ed. (Summer–Fall 2004). "Interview with FreeDOS Creator Jim Hall"(PDF). PHRAINE - Computer Technology Enlightenment Without the Noise. Vol. 1, no. 2(4). pp. 3–6. Archived(PDF) from the original on 2019-02-27. Retrieved 2019-02-27.
