 |
This article needs additional citations for verification. Please help improve this articlebyadding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Fumigation" – news · newspapers · books · scholar · JSTOR (April 2021) (Learn how and when to remove this message) |
Fumigation is a method of pest control or the removal of harmful microorganisms by completely filling an area with gaseous pesticides, or fumigants, to suffocateorpoison the pests within. It is used to control pests in buildings (structural fumigation), soil, grain, and produce. Fumigation is also used during the processing of goods for import or export to prevent the transfer of exotic organisms.
Structural fumigation targets pests inside buildings (usually residences), including pests that inhabit the physical structure itself, such as woodborers and drywood termites. Commodity fumigation, on the other hand, is also to be conducted inside a physical structure, such as a storage unit, but it aims to eliminate pests from infesting physical goods, usually food products, by killing pests within the container which will house them.
Each fumigation lasts for a certain duration. This is because after spraying the pesticides, or fumigants, only the pests around are eradicated.[1]
Fumigation generally involves the following phases: first, humans are evacuated from the area intended for fumigation and the area covered to create a sealed environment. Next, the fumigant is released into the space to be fumigated. The space is held for a set period while the fumigant gas percolates through the space and acts on/kills any infestation in the area. Finally, the space is ventilated so that the poisonous gases are allowed to escape from the space, rendering it safe for humans to enter. If successful, the fumigated area is now safe and pest free. [2]
Structural fumigation techniques differ from building to building. In a residential setting, a "rubber" tent or tents, typically made of plastic/pvc coated canvas material, may be placed over the entire house while the pesticides are being released into the vacant residence. This process is called tent fumigation, or "tenting". The sealed tent concentrates the poisonous gases and prevents them from escaping into the neighborhood. It is commonly used for sulfuryl fluoride for the treatment of termites.[3]
Fumigation of hospital rooms with high concentrations of toxic chemicals has been proposed to reduce microbial agents on hospital surfaces and to control surgical site infections.[4] Formaldehyde fumigation has long been an accepted method for areas where microbiological cleanliness is required. Fumigation with formaldehyde vapor is the recognized and most commonly used method because it is a cost-effective procedure. [citation needed] However, alternative methods are sought due to safety and efficacy concerns. Vaporized hydrogen peroxide is a dry gaseous method that has been used as a reliable alternative for aseptic processing isolators, and more recently, for room/facility decontamination.[5] Hydrogen peroxide and silver in solution and diluted in water is a non-toxic and low cost agent. For example, to fumigate a 1000 ft3 (~28.32 m3) area, a 20% solution (200 mL of solution in 1000 mL demineralized water) would be sprayed via fogger for 30 minutes. Fogging may be done at a rate of up to 130 mL/minute and the contact time should be at least one hour.[6]
At the heart of this technology is the use of chemicals. Ideally, these chemicals kill or passivate the targeted creatures without harming others. Usually such a feat is impossible, so fumigation is conducted in the absence of humans.[3]
| chemical | boiling point/volatility | safety | comment |
|---|---|---|---|
| Methyl bromide | gas (4.3 °C) | , TLV-TWA 5 ppm, MAK 5 ppm. | restricted by the Montreal Protocol. |
| ethylene oxide | gas (10.7 °C) | TLV-TWA 1 ppm | food |
| sulfuryl fluoride | gas (-55 °C) | TLV-TWA 5 ppm, | applied in tent for termites |
| chloropicrin | 112 °C | TLV-TWA 0.1 ppm, MAK 0.1 ppm, | lachrymator. |
| naphthalene | sublimable solid | TLV-TWA 10 ppm, | fabrics ("mothballs") |
| phosphine | gas (-87.7 °C) | ?? | rodents and insects in grain silos |
| 1,3-dichloropropene | 111 °C | MAK 75 ppm | soil fumigant |
Many chemicals have been discontinued owing to safety issues.
Fumigation is a hazardous operation. Generally it is a legal requirement that the operator who carries out the fumigation operation holds official certification to perform the fumigation, as the chemicals used are toxic to most forms of life, including humans.[1]
Post operation ventilation of the area is a critical safety aspect of fumigation. It is important to distinguish between the pack or source of the fumigant gas and the environment which has been fumigated. While the fumigant pack may be safe and spent, the space will still hold the fumigant gas until it has been ventilated.
