Contents

History of measurement systems in Pakistan

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this articlebyintroducing citations to additional sources. Find sources: "History of measurement systems in Pakistan" – news · newspapers · books · scholar · JSTOR (December 2014) This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (December 2014) (Learn how and when to remove this message) (Learn how and when to remove this message)

The History of measurement systems in Pakistan begins in early Indus Valley civilization when pastoral societies used barter to exchange goodsorservices and needed units of measurement.

The System of measurement is a set of units of measurement which can be used to specify anything which can be measured and were historically important, regulated and defined because of trade and internal commerce. In modern systems of measurement, some quantities are designated as base units, meaning all other needed units can be derived from them, whereas in the early and most historic eras, the units were given by fiat (see statutory law) by the ruling entities and were not necessarily well inter-related or self-consistent.

The history of measurement systems in Pakistan begins in early Indus Valley civilization with the earliest surviving samples dated to the 5th millennium BCE. The Mughal empire (1526–1857) used standard measures to determine land holdings and collect land tax as a part of Mughal land reforms. British units of measurement were adopted in South Asia as first the East India Company and later colonial rule gained foothold. The formal Metrication in Pakistan is dated to October 1967^{[citation needed]} when the Government of Pakistan adopted the International System of Units (SI)

Distance units[edit]

Kos is an ancient unit of distance used in South Asia which is about 2.25 miles. Kos may also refer to about 1.8 km (1⅛ mile) or 3.2 km (2 miles).^[1] The Mughal Empire used Farsang (Parsang) for distance, which was in principle the distance a horse would walk in an hour, about 3 miles = 12,000 cubits.^[2]

Area units[edit]

AKanal is a unitofarea, equivalent to 5445 square feet or one-eighth of an acre. It is mainly used in Punjab province of Pakistan. Under British rule the Marla and Kanal were standardized so that the Kanal equals exactly 605 square yards or 1/8 acre; this is equivalent to about 505.857 square meters. A Kanal is equal to 20 marlas.^[3] The Marla (unit) is a traditional unit of area that was used in Pakistan and Marla was standardized under British rule to be equal to the square rod, or 272.25 square feet, 30.25 square yards, or 25.2929 square metres. As such, it was exactly one 160th of an acre.

Time units[edit]

Paher, is a traditional unit of time used in South Asia, including Pakistan. One pahar nominally equals three hours, and there are eight pahars in a day. The timing of Salat (Namaz) were also used to measure time of the day.

Weight units[edit]

The traditional system is still used in the villages and remote areas of Pakistan.

The current definitions as per the UN are:

See also[edit]

• Metrication in Pakistan
• History of science and technology in Pakistan

External links[edit]

• THE PUNJAB WEIGHTS AND MEASURES ENFORCEMENT RULES, 1976

References[edit]