Contents

ICtCp

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article may be too technical for most readers to understand. Please help improve ittomake it understandable to non-experts, without removing the technical details. (November 2022) (Learn how and when to remove this message) This article may need to be rewritten to comply with Wikipedia's quality standards, as there is far too much incomprehensible English to list, which makes some sections nearly impossible to understand. You can help. The talk page may contain suggestions. (December 2023) (Learn how and when to remove this message)

IC_TC_P, ICtCp, or ITP is a color representation format specified in the Rec. ITU-R BT.2100 standard that is used as a part of the color image pipelineinvideo and digital photography systems for high dynamic range (HDR) and wide color gamut (WCG) imagery.^[1] It was developed by Dolby Laboratories^[2] from the IPT color space by Ebner and Fairchild.^[3][4] The format is derived from an associated RGB color space by a coordinate transformation that includes two matrix transformations and an intermediate nonlinear transfer function that is informally known as gamma pre-correction. The transformation produces three signals called I, C_T, and C_P. The IC_TC_P transformation can be used with RGB signals derived from either the perceptual quantizer (PQ) or hybrid log–gamma (HLG) nonlinearity functions, but is most commonly associated with the PQ function (which was also developed by Dolby).

The I ("intensity") component is a luma component that represents the brightness of the video, and C_T and C_P are blue-yellow (named from tritanopia) and red-green (named from protanopia) chroma components.^[2] Ebner also used IPT as short for "Image Processing Transform".^[3]

The IC_TC_P color representation scheme is conceptually related to the LMS color space, as the color transformation from RGBtoIC_TC_P is defined by first converting RGBtoLMS with a 3×3 matrix transformation, then applying the nonlinearity function, and then converting the nonlinear signals to IC_TC_P using another 3×3 matrix transformation.^[5]IC_TC_P was defined as a YCC digital format with support for 4:4:4, 4:2:2 and 4:2:0 chroma subsamplinginCTA-861-H (that means that in limited range 10 bit mode 0, 1, 2, 3, 1020, 1021, 1022, 1023 values are reserved).^[6]

Derivation[edit]

IC_TC_P is defined by Rec. 2100 as being derived from linear RGB as follows:^[1]

1. Calculate LMS from BT.2100 RGB:${\displaystyle {\begin{bmatrix}L\\M\\S\end{bmatrix}}={\frac {1}{4096}}{\begin{bmatrix}1688&2146&262\\683&2951&462\\99&309&3688\end{bmatrix}}{\begin{bmatrix}R\\G\\B\end{bmatrix}}}$
2. Normalize the LMS by a non-linearity:
   • If the PQ transfer function is used:${\displaystyle {\begin{bmatrix}L'\\M'\\S'\end{bmatrix}}=EOTF_{PQ}^{-1}\left({\begin{bmatrix}L\\M\\S\end{bmatrix}}\right)}$
   • If the HLG transfer function is used:${\displaystyle {\begin{bmatrix}L'\\M'\\S'\end{bmatrix}}=OETF_{HLG}\left({\begin{bmatrix}L\\M\\S\end{bmatrix}}\right)}$
3. Calculate IC_TC_P:
   • for PQ:${\displaystyle {\begin{bmatrix}I\\C_{T}\\C_{P}\end{bmatrix}}={\frac {1}{4096}}{\begin{bmatrix}2048&2048&0\\6610&-13613&7003\\17933&-17390&-543\end{bmatrix}}{\begin{bmatrix}L'\\M'\\S'\end{bmatrix}}}$
   • for HLG: ${\displaystyle {\begin{bmatrix}I\\C_{T}\\C_{P}\end{bmatrix}}={\frac {1}{4096}}{\begin{bmatrix}2048&2048&0\\3625&-7465&3840\\9500&-9212&-288\end{bmatrix}}{\begin{bmatrix}L'\\M'\\S'\end{bmatrix}}}$

All three above mentioned matrixes were derived (only the first 2 are documented derivations^[2]) from the matrixes in IPT. The HLG matrix can be derived the same way as the PQ matrix, with the only difference being the scaling of the chroma rows. The inverted decoding IC_TC_P matrixes are specified in ITU-T Series H Supplement 18.^[7]

IC_TC_P is defined such that the entire BT.2020 space fits into the range [0, 1] for I and [-0.5, +0.5] for the two chroma components. The related uniform color space ITP used in ΔE_ITP (Rec. 2124) scales C_T by 0.5 to restore uniformity.^[8] There is support for ICtCp in zimg (including zimg as part of FFmpeg) and color-science, for both HLG and PQ.

In IPT[edit]

The preceder to IC_TC_P, Ebner & Fairchild IPT color appearance model (1998), has a mostly similar transformation pipeline of input → LMS → nonlinearity → IPT.^[3][9] The differences are that it defines its input to the more general CIEXYZ tristimulus color space and as a result has a more conventional Hunt-Pointer-Estevez (for D65) matrix for LMS. The nonlinearity is a fixed gamma of 0.43, quite close to the one used by RLAB. The second matrix here is slightly different from the IC_TC_P matrix, mainly in that is also considers S (blue cone) for intensity, but IC_TC_P has also Rotation matrix (to align skin tones) and Scalar matrix (scaled to fit the full BT.2020 gamut inside the -0.5 to 0.5 region) multiplied with this matrix:^[2][10]

1. Calculate LMS (see LMS color space § Hunt, RLAB for D65, slightly different^[3]): ${\displaystyle {\begin{bmatrix}L\\M\\S\end{bmatrix}}={\begin{bmatrix}0.4002&0.7075&-0.0807\\-0.2280&1.1500&0.0612\\0&0&0.9184\end{bmatrix}}{\begin{bmatrix}X\\Y\\Z\end{bmatrix}}}$
2. Nonlinearity (L'M'S'): For each of L, M, S components apply a power function: ${\displaystyle X'={\begin{cases}X^{0.43}&{\text{for }}X\geq 0\\-(-X)^{0.43}&{\text{for }}X<0\end{cases}}}$
3. ${\displaystyle {\begin{bmatrix}I\\P\\T\end{bmatrix}}={\begin{bmatrix}0.4000&0.4000&0.2000\\4.4550&-4.8510&0.3960\\0.8056&0.3572&-1.1628\end{bmatrix}}{\begin{bmatrix}L'\\M'\\S'\end{bmatrix}}}$

IPTPQc2[edit]

IPTPQc2 is another related colorspace used by Dolby Vision profile 5 BL+RPU (without EL).^[11] The "c2" in the name means a cross talk matrix is used with c = 2%. It uses full range quantization (0-1023 for 10 bit video, no values reserved). It is also often referred to as IPTPQc2/IPT, as the matrix is in fact the same as in the 1998 IPT paper, just in inverse representation.^[12] Documentation on this format is scarce due to its proprietary nature, but a patent^[13] on the "IPT-PQ" (perceptually quantized IPT) color space seems to describe how Dolby changed the domain to PQ by changing the traditional power function from 1998 IPT paper to PQ function for each of LMS components.^{[speculation?]} The matrix is as follows:

${\displaystyle {\begin{bmatrix}I\\P\\T\end{bmatrix}}_{PQC2}=\left({\frac {1}{8192}}{\begin{bmatrix}8192&799&1681\\8192&-933&1091\\8192&267&-5545\end{bmatrix}}\right)^{-1}{\begin{bmatrix}L'\\M'\\S'\end{bmatrix}}}$

Note the matrix inversion used and an error was made in patent in 1091 number^{[clarification needed]} of the matrix (the matrix after inversion is correct in patent). In addition, this format has no nonlinearity, and is assumed to be BT.2020-based.^[14]

The second step, the dynamic range adjustment modeling (reshaping^[15]), is also defined in the patent.

It is used by Disney+, Apple TV+ and Netflix.^{[citation needed]}

Decoder of IPTPQc2 with reshaping and MMR (but no NLQ and dynamic metadata) is available in libplacebo.^[16]

Support for decoding all stages was added in mpv.

Characteristics[edit]

IC_TC_P has near constant luminance.^[17] The correlation coefficient between encoded I and true luminance is 0.998, much higher than the 0.819 for YC_BC_R. An improved constant luminance versus YC_BC_R is an advantage for color processing operations such as chroma subsampling and gamut mapping where only the color difference information is changed.^[2]

IC_TC_P also improves hue linearity compared with YC_BC_R, which helps with compression performance and color volume mapping.^[18][19] Adaptive reshaping can further provide a 10% improvement on compression performance.^[20]

Improvement in luminance and hue uniformity make scaled IC_TC_P a practical color space for calculating color differences (ΔE_ITP), as introduced by ITU-R Rec. BT.2124.^[8]

In terms of CIEDE2000 color quantization error, 10-bit IC_TC_P would be equivalent to 11.5 bit YC_BC_R.^[2]

Uses[edit]

IC_TC_P is supported in the HEVC video coding standard.^[21] It is also a digital YCC format and can be signaled in EDID's Colorimetry block as part of CTA-861-H.

References[edit]

^ Ebner, Fritz; Fairchild, Mark D. (1998-01-01). "Development and Testing of a Color Space (IPT) with Improved Hue Uniformity". Color and Imaging Conference. 1998 (1): 8–13. doi:10.2352/CIC.1998.6.1.art00003. S2CID 46137693.