 |
The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted.
Find sources: "ISO 128" – news · newspapers · books · scholar · JSTOR (August 2022) (Learn how and when to remove this message) |
 |
Parts of this article (those related to Overview) need to be updated. Please help update this article to reflect recent events or newly available information. (October 2017)
|
ISO 128 is an international standard (ISO), about the general principles of presentationintechnical drawings, specifically the graphical representationofobjectsontechnical drawings.[1]
Since 2003 the ISO 128 standard contains fifteen parts, which were initiated between 1996 and 2003. It starts with a summary of the general rules for the execution and structure of technical drawings. Further it describes basic conventions for lines, views, cuts and sections, and different types of engineering drawings, such as those for mechanical engineering, architecture, civil engineering, and shipbuilding. It is applicable to both manual and computer-based drawings, but it is not applicable to three-dimensional CAD models.[1]
The ISO 128 replaced the previous DIN 6 standard for drawings, projections and views, which was first published in 1922 and updated in 1950 and 1968. ISO 128 itself was first published in 1982, contained 15 pages and "specified the general principles of presentation to be applied to technical drawings following the orthographic projection methods".[2]
Several parts of this standard have been updated individually. The last parts and the standard as a whole were withdrawn by the ISO in 2001.
A thirteenth part was added in 2013.
The 7 parts of the ISO 128 standard are:
