| D-D | |
|---|---|
| Role | Three/four-seat cabin monoplane
Type of aircraft
|
| National origin | US |
| Manufacturer | Invincible Metal Furniture Co |
| Designer | Irl Beach |
| First flight | February 1929 |
| Number built | 1 |
The Invincible D-D was a prototype three/four seat touring aircraft, built in the US in 1929. One example flew but development was ended by the Great Depression.
The D-D[1] was a mid-wing monoplane with a rectangular plan, blunt tipped, constant thickness wing. Canvas covered, it was built around a pair of wooden spars that continued through the fuselage with the pilot's seat between them. Dihedral was 1.25°. Constant chord ailerons filled the outer two-thirds of the trailing edge. The wings were braced with steel V-struts, individually enclosed in wooden fairings, from the two wing spars to a framework under the fuselage where their vertices were transversely joined by a horizontal steel bar.[2]
The Invincible was designed to accept two engines of significantly different power and cost. These were the 67 kW (90 hp) LeBlond 90-7D, a seven-cylinder radial engine or the 130 kW (170 hp) Curtiss Challenger, a six-cylinder, two row radial. The Challenger-powered version could carry four, one more than that with the Leblond engine, but cost $7,800 rather than $5,500. The chosen engine was mounted in the nose with cylinders largely exposed for cooling; the mounting allowed easy interchange between the two types. Fuel tanks were in the wings.[2]
Behind the engine the Invincible's fuselage had a steel tube, rectangular-section structure with fabric covering. The enclosed cabin had, in the four-seater, two rows of side-by-side seats, optional dual control and generous forward, side and upward glazing. Entry was via an oval port-side door.[2]
Its tailplane, triangular in plan, was mounted on top of the fuselage and carried separate, parallel chord elevators. It was wire-braced from above and below to the rudder post of a quadrantal profile fin which carried a constant chord rudder, reaching down to the keel.[2]
The Invincible's fixed, tailwheel landing gear had mainwheels independently mounted on cranked half-axles hinged at the centre of the fuselage underside. Their outer ends were joined to the fuselage sides by inward-leaning pneumatic shock absorber struts and to the ends of the horizontal bar of the wing struttage by short drag struts.[2]
Its first flight was in late January-early February 1929 at Manitowoc, powered by the LeBlond engine and piloted by William Williams, with its designer, Irl Beach, as a passenger. It was scheduled to appear at the Detroit air show that April.[3] Invincible, having entered into aviation in 1928 and produced three or four different prototypes, left the industry in 1929 because of the Great Depression.[1]
Data from Les Ailes, July 1929[2]
General characteristics
Performance
