Contents

Kemeny–Young method

Single-winner electoral system

Part of the Politics and Economics series
Electoral systems
Comparison of electoral systems Social choice theory Mechanism design List (By country)
Single-winner methods Single vote-runoff methods Plurality (FPP) Two-round (US: Jungle primary) Partisan primary Alternative vote (US: Ranked-choice) Condorcet-IRV Condorcet methods Ranked pairs Schulze Minimax Kemeny–Young Nanson Condorcet-IRV Maximal lottery Positional voting First-preference plurality Borda count Anti-plurality voting Cardinal / graded methods Score voting Approval voting Majority judgment STAR voting Quadratic voting
Proportional representation Party-list List type Open list Closed list Localized list Spare vote Apportionment Highest averages Largest remainders National remnant Biproportional apportionment Single transferable vote (Quota methods) Hare STV (Gregory · Wright) Schulze STV CPO-STV Single non-transferable vote Single divisible vote Approval-based committee Thiele's method Phragmen's method Expanding approvals rule Method of equal shares Weighted and Fractional social choice Direct representation Interactive representation Liquid democracy Maximal lottery
Mixed systems By type of representation Winner-take-most Mixed-member proportional Non-compensatory mixed systems Parallel voting Majority bonus Compensatory mixed systems Additional member system Mixed single vote Scorporo Double simultaneous vote Mixed ballot transferable vote Alternative Vote Plus Dual-member proportional Rural–urban proportional
Voting system criteria Spoiler-resistance Condorcet criterion Smith independence Spoiler independence Clone independence Strategy-resistance No lesser evil voting IIA Later-no-harm Later-no-help Rational response Participation criterion Monotonicity criterion Reversal symmetry
Social and collective choice Impossibility theorems Arrow's theorem Impossibility of majority-rule Moulin's impossibility theorem Gibbard's theorem Fishburn's theorem Positive results Median voter theorem Condorcet's jury theorem May's theorem Campbell-Kelly theorem Harsanyi's utilitarian theorem Tournament sets Smith set Landau set Copeland set Split-cycle set Bipartisan set Tournament solution
Politics portal Economics portal
v t e

The Kemeny–Young method is an electoral system that uses ranked ballots and pairwise comparison counts to identify the most popular choices in an election. It is a Condorcet method because if there is a Condorcet winner, it will always be ranked as the most popular choice.

This method assigns a score for each possible sequence, where each sequence considers which choice might be most popular, which choice might be second-most popular, which choice might be third-most popular, and so on down to which choice might be least-popular. The sequence that has the highest score is the winning sequence, and the first choice in the winning sequence is the most popular choice. (As explained below, ties can occur at any ranking level.)

The Kemeny–Young method is also known as the Kemeny rule, VoteFair popularity ranking, the maximum likelihood method, and the median relation.

Description[edit]

The Kemeny–Young method uses preferential ballots on which voters rank choices according to their order of preference. A voter is allowed to rank more than one choice at the same preference level.^{[citation needed]} Unranked choices are usually interpreted as least-preferred.

Kemeny–Young calculations are usually done in two steps. The first step is to create a matrix or table that counts pairwise voter preferences. The second step is to test all possible rankings, calculate a score for each such ranking, and compare the scores. Each ranking score equals the sum of the pairwise counts that apply to that ranking.

The ranking that has the largest score is identified as the overall ranking. (If more than one ranking has the same largest score, all these possible rankings are tied, and typically the overall ranking involves one or more ties.)

Another way to view the ordering is that it is the one which minimizes the sum of the Kendall tau distances (bubble sort distance) to the voters' lists.

In order to demonstrate how an individual preference order is converted into a tally table, it is worth considering the following example. Suppose that a single voter has a choice among four candidates (i.e. Elliot, Meredith, Roland, and Selden) and has the following preference order:

These preferences can be expressed in a tally table. A tally table, which arranges all the pairwise counts in three columns, is useful for counting (tallying) ballot preferences and calculating ranking scores. The center column tracks when a voter indicates more than one choice at the same preference level. The above preference order can be expressed as the following tally table:^{[citation needed]}

Now suppose that multiple voters had voted on those four candidates. After all ballots have been counted, the same type of tally table can be used to summarize all the preferences of all the voters. Here is an example for a case that has 100 voters:

The sum of the counts in each row must equal the total number of votes.

After the tally table has been completed, each possible ranking of choices is examined in turn, and its ranking score is calculated by adding the appropriate number from each row of the tally table. For example, the possible ranking:

1. Elliot
2. Roland
3. Meredith
4. Selden

satisfies the preferences Elliot > Roland, Elliot > Meredith, Elliot > Selden, Roland > Meredith, Roland > Selden, and Meredith > Selden. The respective scores, taken from the table, are

• Elliot > Roland: 30
• Elliot > Meredith: 60
• Elliot > Selden: 60
• Roland > Meredith: 70
• Roland > Selden: 60
• Meredith > Selden: 40

giving a total ranking score of 30 + 60 + 60 + 70 + 60 + 40 = 320.

Calculating the overall ranking[edit]

After the scores for every possible ranking have been calculated, the ranking that has the largest score can be identified, and becomes the overall ranking. In this case, the overall ranking is:

1. Roland
2. Elliot
3. Selden
4. Meredith

with a ranking score of 370.

If there are cycles or ties, more than one possible ranking can have the same largest score. Cycles are resolved by producing a single overall ranking where some of the choices are tied.^{[clarification needed]}

Summary matrix[edit]

After the overall ranking has been calculated, the pairwise comparison counts can be arranged in a summary matrix, as shown below, in which the choices appear in the winning order from most popular (top and left) to least popular (bottom and right). This matrix layout does not include the equal-preference pairwise counts that appear in the tally table:^[1]

In this summary matrix, the largest ranking score equals the sum of the counts in the upper-right, triangular half of the matrix (shown here in bold, with a green background). No other possible ranking can have a summary matrix that yields a higher sum of numbers in the upper-right, triangular half. (If it did, that would be the overall ranking.)

In this summary matrix, the sum of the numbers in the lower-left, triangular half of the matrix (shown here with a red background) are a minimum. The academic papers by John Kemeny and Peyton Young^[2][3] refer to finding this minimum sum, which is called the Kemeny score, and which is based on how many voters oppose (rather than support) each pairwise order:

Example[edit]

Suppose that Tennessee is holding an election on the location of its capital. The population is concentrated around four major cities. All voters want the capital to be as close to them as possible. The options are:

• Memphis, the largest city, but far from the others (42% of voters)
• Nashville, near the center of the state (26% of voters)
• Chattanooga, somewhat east (15% of voters)
• Knoxville, far to the northeast (17% of voters)

The preferences of each region's voters are:

This matrix summarizes the corresponding pairwise comparison counts:

The Kemeny–Young method arranges the pairwise comparison counts in the following tally table:

The ranking score for the possible ranking of Memphis first, Nashville second, Chattanooga third, and Knoxville fourth equals (the unit-less number) 345, which is the sum of the following annotated numbers.

42% (of the voters) prefer Memphis over Nashville

42% prefer Memphis over Chattanooga

42% prefer Memphis over Knoxville

68% prefer Nashville over Chattanooga

68% prefer Nashville over Knoxville

83% prefer Chattanooga over Knoxville

This table lists all the ranking scores:

The largest ranking score is 393, and this score is associated with the following possible ranking, so this ranking is also the overall ranking:

If a single winner is needed, the first choice, Nashville, is chosen. (In this example Nashville is the Condorcet winner.)

The summary matrix below arranges the pairwise counts in order from most popular (top and left) to least popular (bottom and right):

In this arrangement the largest ranking score (393) equals the sum of the counts in bold, which are in the upper-right, triangular half of the matrix (with a green background).

Characteristics[edit]

In all cases that do not result in an exact tie, the Kemeny–Young method identifies a most-popular choice, second-most popular choice, and so on.

A tie can occur at any preference level. Except in some cases where circular ambiguities are involved, the Kemeny–Young method only produces a tie at a preference level when the number of voters with one preference exactly matches the number of voters with the opposite preference.

Satisfied criteria for all Condorcet methods[edit]

All Condorcet methods, including the Kemeny–Young method, satisfy these criteria:

Non-imposition

There are voter preferences that can yield every possible overall order-of-preference result, including ties at any combination of preference levels.

Condorcet criterion

If there is a choice that wins all pairwise contests, then this choice wins.

Majority criterion

If a majority of voters strictly prefer choice X to every other choice, then choice X is identified as the most popular.

Non-dictatorship

A single voter cannot control the outcome in all cases.

Additional satisfied criteria[edit]

The Kemeny–Young method also satisfies these criteria:

Unrestricted domain

Identifies the overall order of preference for all the choices. The method does this for all possible sets of voter preferences and always produces the same result for the same set of voter preferences.

Pareto efficiency

Any pairwise preference expressed by every voter results in the preferred choice being ranked higher than the less-preferred choice.

Monotonicity

If voters increase a choice's preference level, the ranking result either does not change or the promoted choice increases in overall popularity.

Smith criterion

The most popular choice is a member of the Smith set, which is the smallest nonempty set of choices such that every member of the set is pairwise preferred to every choice not in the Smith set.

Independence of Smith-dominated alternatives

If choice X is not in the Smith set, adding or withdrawing choice X does not change a result in which choice Y is identified as most popular.

Reinforcement

If all the ballots are divided into separate races and the overall ranking for the separate races are the same, then the same ranking occurs when all the ballots are combined.^[4]

Reversal symmetry

If the preferences on every ballot are inverted, then the previously most popular choice must not remain the most popular choice.

Failed criteria for all Condorcet methods[edit]

In common with all Condorcet methods, the Kemeny–Young method fails these criteria (which means the described criteria do not apply to the Kemeny–Young method):

Independence of irrelevant alternatives

Adding or withdrawing choice X does not change a result in which choice Y is identified as most popular.

Invulnerability to burying

A voter cannot displace a choice from most popular by giving the choice an insincerely low ranking.

Invulnerability to compromising

A voter cannot cause a choice to become the most popular by giving the choice an insincerely high ranking.

Participation

Adding ballots that rank choice X over choice Y never cause choice Y, instead of choice X, to become most popular.

Later-no-harm

Ranking an additional choice (that was otherwise unranked) cannot displace a choice from being identified as the most popular.

Consistency

If all the ballots are divided into separate races and choice X is identified as the most popular in every such race, then choice X is the most popular when all the ballots are combined.

Sincere favorite criterion

The optimal voting strategy for an individual should always include giving their favorite candidate maximum support.

Additional failed criteria[edit]

The Kemeny–Young method also fails these criteria (which means the described criteria do not apply to the Kemeny–Young method):

Independence of clones

Offering a larger number of similar choices, instead of offering only a single such choice, does not change the probability that one of these choices is identified as most popular.

Invulnerability to push-over

A voter cannot cause choice X to become the most popular by giving choice Y an insincerely high ranking.

Schwartz

The choice identified as most popular is a member of the Schwartz set.

Polynomial runtime^[5]

An algorithm is known to determine the winner using this method in a runtime that is polynomial in the number of choices.

Calculation methods and computational complexity[edit]

An algorithm for computing a Kemeny-Young ranking in time polynomial in the number of candidates is not known, and unlikely to exist since the problem is NP-hard^[5] even if there are just 4 voters (even)^[6][7] or 7 voters (odd).^[8]

It has been reported^[9] that calculation methods based on integer programming sometimes allowed the computation of full rankings for votes on as many as 40 candidates in seconds. However, certain 40-candidate 5-voter Kemeny elections generated at random were not solvable on a 3 GHz Pentium computer in a useful time bound in 2006.^[9]

The Kemeny–Young method can be formulated as an instance of a more abstract problem, of finding weighted feedback arc setsintournament graphs.^[10] As such, many methods for the computation of feedback arc sets can be applied to this problem, including a variant of the Held–Karp algorithm that can compute the Kemeny–Young ranking of ${\displaystyle n}$ candidates in time ${\displaystyle O(n2^{n})}$, significantly faster for many candidates than the factorial time of testing all rankings.^[11][12] There exists a polynomial-time approximation scheme for computing a Kemeny-Young ranking,^[13] and there also exists a parameterized subexponential-time algorithm with running time O^*(2^O(√OPT)) for computing such a ranking.^[10]

History[edit]

The Kemeny–Young method was developed by John Kemeny in 1959.^[2]

In 1978, Peyton Young and Arthur Levenglick axiomatically characterized the method, showing that it is the unique neutral method satisfying consistency and the so-called quasi-Condorcet criterion.^[3] It can also be characterized using consistency and a monotonicity property.^[14] In other papers,^{[15] [16] [17] [18]} Young adopted an epistemic approach to preference aggregation: he supposed that there was an objectively 'correct', but unknown preference order over the alternatives, and voters receive noisy signals of this true preference order (cf. Condorcet's jury theorem.) Using a simple probabilistic model for these noisy signals, Young showed that the Kemeny–Young method was the maximum likelihood estimator of the true preference order. Young further argues that Condorcet himself was aware of the Kemeny-Young rule and its maximum-likelihood interpretation, but was unable to clearly express his ideas.

In the papers by John Kemeny and Peyton Young, the Kemeny scores use counts of how many voters oppose, rather than support, each pairwise preference,^[2][3] but the smallest such score identifies the same overall ranking.

Since 1991 the method has been promoted under the name "VoteFair popularity ranking" by Richard Fobes.^[19]

Comparison table[edit]

The following table compares the Kemeny-Young method with other single-winner election methods:

Notes[edit]

External links[edit]

• VoteFair.org — A website that calculates Kemeny–Young results. For comparison, it also calculates the winner according to plurality, Condorcet, Borda count, and other voting methods.
• VoteFair_Ranking.cpp — C++ program, available on GitHub under the MIT license, that calculates VoteFair ranking results, which include Condorcet-Kemeny calculations.
• Condorcet Class PHP library supporting multiple Condorcet methods, including Kemeny–Young method.
• C++ Program for Kemeny-Young Preference Aggregation — Command-line program for fast calculation of Kemeny-Young results, as source code and compiled binaries for Windows and Linux. Open source, except uses Numerical Recipes.
• C Program for Kemeny-Young Preference Aggregation — Implements Davenport's algorithm with no other library dependencies. Open source, LGPL licensed. A Ruby binding to the library is also open source, LPGL licensed.
• Kemeny-Young Optimal Rank Aggregation in Python  — Tutorial that uses a simple formulation as integer program and is adaptable to other languages with bindings to lpsolve.
• QuickVote — A website that calculates Kemeny–Young results, and gives further explanation and examples of the concept. It also calculates the winner according to plurality, Borda count, instant-runoff and other voting methods.