Contents

Lancaster power stations

Lancaster power stations
Country	United Kingdom
Location	Lancaster Lancashire
Coordinates	54°04′03″N 02°47′19″W / 54.06750°N 2.78861°W / 54.06750; -2.78861
Status	Decommissioned and demolished
Construction began	1892, 1915
Commission date	1894, 1916
Decommission date	1976
Owner(s)	Lancaster Corporation (1892–1948) Ministry of Munitions, Cator Road (1916–1921) British Electricity Authority (1948–1955) Central Electricity Authority (1955–1957) Central Electricity Generating Board (1958–1976)
Operator(s)	As owner
Thermal power station
Primary fuel	Coal
Turbine technology	Steam turbine (and reciprocating engines prior to 1910)
Chimneys	1
Cooling towers	None
Cooling source	river water
Power generation
Units operational	2 × 20.8 MW (largest sets)
Make and model	Metropolitan Vickers
Units decommissioned	All
Nameplate capacity	50.25 MW (1958)
Annual net output	217.15 GWh (1963)
[edit on Wikidata]

The Lancaster power stations provided electricity to the Lancashire town and city of Lancaster and the surrounding area from 1894 to 1976. The first power station was built and operated by Lancaster Corporation and started generating electricity in April 1894. The second power station was built during the First World War near the Lune Aqueduct to provide electric power for a munitions factory. When the factory closed after the war the power station was purchased by the corporation to provide electric power throughout its supply area.

History[edit]

In 1890 Lancaster Corporation applied for, and the Board of Trade granted, a Provisional Order to generate and supply electricity to the town of Lancaster, Lancashire. This Order was confirmed by Parliament in the Electric Lighting Orders (No. 2) Act 1890 (54 & 55 Vict. c. clxxxvii).^[1] The Corporation electricity undertaking constructed a power station with a generating capacity of 240 kW.^[2] The generating equipment comprised steam driven Willans engines coupled directly to Brush direct current dynamos. The supply of electricity commenced on 14 April 1894. In the year ending March 1898 the station supplied a total of 147.175 MWh powering 12,256 lamps (each of 8 candle-power). The maximum load on the system was 190 kW.^[2] A supply of electricity to the Lancaster tram system commenced in 1903.^[3]

In 1912 the cost of coal had increased significantly, Lancaster Corporation claimed it had increased by 25 per cent since 1911, the Corporation investigated the possibility of using hydro-power from the River Lune to generate electricity.^[4] Chester Corporation had recently installed a hydro-electric station on the River Dee. In 1923 the plant at Chester comprised 1 × 185 kW and 2 × 225 kWhydro-electric machines.^[5] Nothing became of the proposal for Lancaster.

Caton Road station[edit]

At the outbreak of the First World War a National Projectile Factory was established off of Caton Road adjacent to the River Lune and the Lune Aqueduct.^[6] Construction started in September 1915 and the factory was operational from November 1916. The 33 acre (13.3 hectare) site included an electricity generating station at the east end (54°04'02.6"N 2°47'19.0"W).^[7][8] Cooling water for the steam condensers was abstracted from the River Lune. The munitions factory closed down in 1922 and Lancaster Corporation purchased the power station to increase the electricity supplies to Lancaster.^[9]

By 1923 the steam plant at the station had a capacity of 26,000 lb/h (3.28 kg/s) and supplied steam to:^[10]

• 1 × 100 kW steam turbine driven generator
• 2 × 225 kW steam turbine driven generators
• 2 × 200 kW reciprocating engine driven generators
• 2 × 300 kW steam turbines driven generator

These provided a total generating capacity of 1,550 kW.

The station supplied only direct current (DC) at 460 & 230 Volts. In 1923 the maximum load on the system was 910 kW, and there was a connected load of 3,122 kW.^[10] The power was sold to the following users:^[10]

Traction current was supplied to the Lancaster tramway system.

The sale of electricity provided an income to the Corporation of £21,747 in 1923. The surplus of revenue over expenses for generating electricity was £6,280.^[10]

Low pressure station[edit]

The plant installed from the inauguration of the power station in 1916 until 1928 became known as the low pressure (LP) station and comprised:^[11]

• Boilers
  • 2 × Stirling 55,000 lb/h (6.93 kg/s) of steam, coal-fired boilers, supplying steam at 210 psi at 610 °F (14.5 bar at 321 °C)
  • 4 × Stirling 15,000 lb/h (1.89 kg/s) coal-fired boilers, 210 psi at 610 °F (14.5 bar at 321 °C)
• These gave a total steam evaporative capacity of 170,000 lb/h (21.42 kg/s).
• Generating plant
  • 1 × 5.0 MW Metropolitan-Vickers turbo-alternator operating at 6.66 kV
  • 1 × 2.1 MW Metropolitan-Vickers turbo-alternator operating at 6.66 kV
  • 1 × 1.1 MW Metropolitan-Vickers turbo-alternator operating at 6.66 kV
  • 2 × 225 kW Greenwood & Batley turbo-generators operating at 460 V DC.

The power station had three railway sidings off the Settle Junction & Morecambe Line (London Midland and Scottish Railway) for the supply of coal to the station.^[7][12]

National Grid[edit]

Under the terms of the Electricity (Supply) Act 1926^[13] (16-17 Geo. 5 c. 51) the Central Electricity Board (CEB) was established.^[14] The CEB identified high efficiency ‘selected’ power station that would supply electricity most effectively; Lancaster became a selected station. The CEB also constructed the national grid (1927–33) to connect power stations within a region. Lancaster was a node on the major North–South line from Kilmarnock in Scotland to Carlisle, Lancaster, Stoke-on-Trent, Bristol and Hayle Cornwall.^[15] The connection in Lancaster was at a 132 kV grid substation that was built south east of the Caton Road power station.^[16]

High pressure station[edit]

Demand for electricity increased – nationally from 9,169 GWh in 1930 to 24,263 GWh in 1940^[15] – and a high pressure (HP) station was commissioned at Lancaster power station in 1942 and comprised:^[11]

• Boilers
  • 2 × 205,000 lb/h Stirling (2 × 25.83 kg/s) coal-fired boilers operating at a steam pressure of 430 psi and 830 °F (29.7 bar and 443 °C).
• Generators
  • 2 × 20.8 MW Metropolitan-Vickers turbo-alternators operating at 6.6 kV.

Nationalisation[edit]

Upon nationalisation of the British electricity supply industry in 1948 under the provisions of the Electricity Act 1947^[17] (10-11 Geo. 6 c. 54), the Lancaster electricity undertaking was abolished, ownership of Lancaster power station was vested in the British Electricity Authority, and subsequently the Central Electricity Authority and the Central Electricity Generating Board (CEGB). At the same time the electricity distribution and sales responsibilities of the Lancaster electricity undertaking were transferred to the North Western Electricity Board (NORWEB).^[17]

The total installed plant capacity at Lancaster power station in the mid-1950s was 50.25 MW.^[11]

Operating details of the station were as follows:^{[11][18][19][20][21][22]}

In 1958 the Lancaster electricity district supplied an area of 235 square miles and a population of 104,220. The amount of electricity sold and the number and types of consumers was as follows:^[11]

In 1958 the above totals were made up of the following:^[11]

Closure[edit]

Lancaster power station closed on 25 October 1976.^[23] The buildings were subsequently demolished. The site is now occupied by commercial and industrial units.

The 132 kV substation to the east of the site remains operational.^[16] The substation has a 132 kV connection to Heysham Nuclear power station.

See also[edit]

• Timeline of the UK electricity supply industry
• List of power stations in England
• Ribble power station
• Heysham nuclear power station

References[edit]