 |
This article needs additional citations for verification. Please help improve this articlebyadding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Leavening agent" – news · newspapers · books · scholar · JSTOR (July 2014) (Learn how and when to remove this message) |
Incooking, a leavening agent (/ˈlɛvənɪŋ/) or raising agent, also called a leaven (/ˈlɛvən/) or leavener, is any one of a number of substances used in doughs and batters that cause a foaming action (gas bubbles) that lightens and softens the mixture. An alternative or supplement to leavening agents is mechanical action by which air is incorporated (i.e. kneading). Leavening agents can be biological or synthetic chemical compounds. The gas produced is often carbon dioxide, or occasionally hydrogen.[1]
When a dough or batter is mixed, the starch in the flour and the water in the dough form a matrix[2] (often supported further by proteins like glutenorpolysaccharides, such as pentosansorxanthan gum). The starch then gelatinizes and sets, leaving gas bubbles that remain.
Chemical leavens are mixtures or compounds that release gases when they react with each other, with moisture, or with heat. Most are based on a combination of acid (usually a low molecular weight organic acid) and a saltofbicarbonate (HCO3−). After they act, these compounds leave behind a chemical salt. Chemical leavens are used in quick breads and cakes, as well as cookies and numerous other applications where a long biological fermentation is impractical or undesirable.
Chemical leavening using pearl ash as a leavening agent was mentioned by Amelia Simmons in her American Cookery,[3] published in 1796.[4]
Since chemical expertise is required to create a functional chemical leaven without producing off-flavors from the chemical precursors involved, such substances are often mixed into premeasured combinations for maximum results. These are generally referred to as baking powders. Sour milk and carbonates were used in the 1800s. The breakthrough in chemical leavening agents occurred in the 1930s with the introduction of monocalcium phosphates (Ca(H2PO4)2). Other leavening agents developed include sodium aluminium sulfate (NaAl(SO4)2·12H2O), disodium pyrophosphate (Na2H2P2O7), and sodium aluminium phosphates (NaH14Al3(PO4)8·4H2O and Na3H15Al2(PO4)8). These compounds combine with sodium bicarbonate to give carbon dioxide in a predictable manner.[5]
Steam and air are used as leavening agents when they expand upon heating.[6] To take advantage of this style of leavening, the baking must be done at high enough temperatures to flash the water to steam, with a batter that is capable of holding the steam in until set. This effect is typically used in popovers, in Yorkshire puddings, and, to a lesser extent, in tempura.
|
This section does not cite any sources. Please help improve this sectionbyadding citations to reliable sources. Unsourced material may be challenged and removed. (February 2020) (Learn how and when to remove this message)
|
Using a whisk on certain liquids, notably creamoregg whites, can also create foams through mechanical action. This is the method employed in the making of sponge cakes, where an egg protein matrix produced by vigorous whipping provides almost all the structure of the finished product.
The Chorleywood bread process uses a mix of biological and mechanical leavening to produce bread; while it is considered by food processors[who?] to be an effective way to deal with the soft wheat flours characteristic of British Isles agriculture, it is controversial[according to whom?] due to a perceived lack of quality in the final product. The process has nevertheless been adapted by industrial bakers in other parts of the world.
Authority control databases: National  |
|
|---|
