| Development | |
|---|---|
| Designer | Bruce Kirby |
| Location | Canada |
| Year | 1985 |
| Builder(s) | Mirage Yachts |
| Name | Mirage 30 SX |
| Boat | |
| Displacement | 5,900 lb (2,676 kg) |
| Draft | 5.89 ft (1.80 m) |
| Hull | |
| Type | Monohull |
| Construction | Fiberglass |
| LOA | 30.00 ft (9.14 m) |
| LWL | 24.12 ft (7.35 m) |
| Beam | 10.50 ft (3.20 m) |
| Engine type | Bukh DB 8 diesel engine |
| Hull appendages | |
| Keel/board type | fin keel |
| Rudder(s) | internally-mounted spade-type rudder |
| Rig | |
| General | Fractional rigged sloop |
| I foretriangle height | 38.27 ft (11.66 m) |
| J foretriangle base | 11.72 ft (3.57 m) |
| P mainsail luff | 38.72 ft (11.80 m) |
| E mainsail foot | 12.88 ft (3.93 m) |
| Sails | |
| Mainsail area | 249.36 sq ft (23.166 m2) |
| Jib/genoa area | 224.26 sq ft (20.834 m2) |
| Total sail area | 473.6 sq ft (44.00 m2) |
| Racing | |
| PHRF | 114 (average) |
← Kirby 30 | |
The Mirage 30 SX is a Canadian sailboat, that was designed by Bruce Kirby as a racer and first built in 1985.[1][2][3][4]
The Mirage 30 SX design is not related to the Mirage 30, but is instead a lightweight development of the Kirby 30, with a deeper elliptical shaped keel, a new rudder and a racing interior.[1][4]
The boat was built by Mirage YachtsinCanada, but it is now out of production. Only a small number were built.[1][4][5]
The Mirage 30 SX is a small racing keelboat, built predominantly of fiberglass. It has a fractional sloop rig, an internally-mounted spade-type rudder and a fixed fin keel. It displaces 5,900 lb (2,676 kg).[1][2][4]
The boat has a draft of 5.89 ft (1.80 m) with the standard keel. It is fitted with a Bukh DB 8 diesel engine.[1][4]
The boat has a PHRF racing average handicap of 114 with a high of 108 and low of 120. It has a hull speed of 6.58 kn (12.19 km/h).[2][4]
Related development
Similar sailboats
