Contents

Module:Location map/data/Australia South Australia

Location map of South Australia

name	South Australia
border coordinates
	-25.6
	128.5	←↕→	141.5
	-38.5
map center	32°03′S 135°00′E / 32.05°S 135°E / -32.05; 135
image	Australia South Australia location map.svg
image1	Australia South Australia relief location map.png
image2	Australia South Australia location map blank.svg

Module:Location map/data/Australia South Australia is a location map definition used to overlay markers and labels on an equirectangular projection map of South Australia. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Australia South Australia":

• {{Location map|Australia South Australia |...}}
• {{Location map many|Australia South Australia |...}}
• {{Location map+|Australia South Australia |...}}
• {{Location map~|Australia South Australia |...}}

Map definition

• name = South Australia

  Name used in the default map caption

• image = Australia South Australia location map.svg

  The default map image, without "Image:" or "File:"

• image1 = Australia South Australia relief location map.png

  An alternative map image, usually a relief map, which can be displayed via the relieforAlternativeMap parameters

• image2 = Australia South Australia location map blank.svg

  Alternative map image which can be displayed via the AlternativeMap parameter

• top = -25.6

  Latitude at top edge of map, in decimal degrees

• bottom = -38.5

  Latitude at bottom edge of map, in decimal degrees

• left = 128.5

  Longitude at left edge of map, in decimal degrees

• right = 141.5

  Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relieforAlternativeMap parameters. The map displayed as image2 can be used with the AlternativeMap parameter. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Precision

Longitude: from West to East this map definition covers 13 degrees.

• At an image width of 200 pixels, that is 0.065 degrees per pixel.
• At an image width of 1000 pixels, that is 0.013 degrees per pixel.

Latitude: from North to South this map definition covers 12.9 degrees.

• At an image height of 200 pixels, that is 0.0645 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0129 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

Adelaide

Adelaide (South Australia)

{{Location map | Australia South Australia
| width = 200
| label = Adelaide
| lat_deg = 34  | lat_min = 55 | lat_sec = 44 | lat_dir = S
| lon_deg = 138 | lon_min = 36 | lon_sec = 04 | lon_dir = E
}}

Location map many, using relief map (image1)

Kalka

{{Location map many | Australia South Australia
| relief   = yes
| width    = 200
| caption  = Locations in South Australia
| lat1 = -26.11 | long1 = 129.15 | label1 = Kalka
| lat2 = -37.83 | long2 = 140.78 | label2 = Mount Gambier
| lat3 = -31.64 | long3 = 129.00 | label3 = Border Village
| lat4 = -32.07 | long4 = 140.98 | label4 = Cockburn
}}

Location map+, using AlternativeMap

Kalka

{{Location map+ | Australia South Australia
| AlternativeMap=Australia South Australia location map blank.svg
| width   = 200
| caption = Locations in South Australia
| places  =
  {{Location map~ | Australia South Australia
  | lat = -26.11 | long = 129.15 | label = Kalka
  }}
  {{Location map~ | Australia South Australia
  | lat = -37.83 | long = 140.78 | label = Mount Gambier
  }}
  {{Location map~ | Australia South Australia
  | lat = -31.64 | long = 129.00 | label = Border Village
  }}
  {{Location map~ | Australia South Australia
  | lat = -32.07 | long = 140.98 | label = Cockburn
  }}
}}

See also

• Module:Location map/data/Australia

Location map templates

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

Creating new map definitions

• Template:Location map/Creating a new map definition

return {
 name = 'South Australia',
 top = -25.6,
 bottom = -38.5,
 left = 128.5,
 right = 141.5,
 image = 'Australia South Australia location map.svg',
 image1 = 'Australia South Australia relief location map.png',
 image2 = 'Australia South Australia location map blank.svg'
}