Contents

S-V

Rocket stage

S-V

S-V stage on top of the S-IV
Manufacturer	Convair
Country of origin	United States
Used on	Saturn I (stage 3)
General characteristics
Height	9.14 m (30.0 ft)
Diameter	3.05 m (10.0 ft)
Gross mass	15,600 kg (34,400 lb)
Propellant mass	13,604 kg (30,000 lb)
Empty mass	1,996 kg (4,400 lb)
Associated stages
Family	Saturn
Derivatives	Centaur
Launch history
Status	Retired
Total launches	4
Successes (stage only)	4
Failed	0
First flight	October 27, 1961
Last flight	March 28, 1963
S-V
Powered by	2RL-10 engines
Maximum thrust	133.45 kN (30,000 lbf)
Specific impulse	425 s (4.17 km/s)
Burn time	425 s
Propellant	LH2 / LOX

The S-V (pronounced "S-five") was the third stage of the Saturn I rocket. It was built by Convair. It was designed to use two RL-10A-1 engines fueled by liquid hydrogen (LH₂₎ and liquid oxygen (LOX) in tanks utilizing a common bulkhead to separate the propellants.

History[edit]

Convair Astronautics was awarded a contract to deliver the S-V stage for the Saturn I. The stage was intended to boost lift capacity for U.S. military launches in the 1960s. The S-V would ultimately fly as the third stage on early launches of the Saturn I. Convair delivered two S-V stages in February 1961^[1] with one being flown on SA-1 attached to an also inert S-IV, the second was used for dynamic testing of the complete Saturn I before being later flown. In May 1961 NASA eliminated the requirement for all Saturn I launches to be flown with S-V's by flying in a two-stage only version. Despite this, the stage would fly four times in total.^[2] With the introduction of the Saturn IB and the needs of the military fulfilled on other launches, all further launches would be on either the Saturn IBorSaturn V, each of which did not include the S-V. A version of this stage was also used on the Atlas-LV3C as the Centaur, modern derivatives of which are still flown today, making it the only Saturn rocket stage still currently operating.

Flight history[edit]

Ultimately, the S-V would go on to fly four times between 1961 and 1964. Each of which were flown on suborbital test flights of the Saturn I. Because of the suborbital nature of these flights, each S-V was filled with water to act as ballast, making the stage inert. The water was released in space twice for Project Highwater. Modern derivatives of the stage are still in use today on the Atlas V and the Vulcan Centaur.

References[edit]