Capabilities of the plant to manufacture ammunition metal parts, and artillery and mortar rounds include forging, machining, heat-treating, welding, phosphating and painting, finishing, and destructive and non-destructive testing.[2]
Some of the projectiles produced by SCAAP are 155 mm and 105 mm artillery projectiles, including the 155 mmM795 and M107, and the 105 mm PGU-45/B High Fragmentation (HF) cartridge for the Air Force's AC-130 gunship; 120 mm mortar (M120/M121) projectiles, M931 Full Range Training Cartridge (FRTC), M933 and M934 high-explosive (HE), M930 and M983 illumination, M929 white phosphorus (WP) smoke; and the 5"/54 (5-inch) naval gun projectile.[3][2]
SCAAP can also produce 8-inch (203 mm) and 175 mm artillery shells like those used in the M110 howitzer and the M107 self-propelled gun which have been retired by the United States, but are used by some other nations, including some allied to the United States, including Taiwan.
In 2007 SCAAP were the recipient of the Army Materiel Command (AMC)) Superior Unit Award with many of the other Army Ammunition Plants and Ammunition Depots.[6] In 2012 SCAAP Received a second AMC Superior Unit Award.
SCAAP was awarded the 2011 Secretary of the Army Environmental Award for Sustainability - Industrial Installation, being the only JMC installation to receive the award. The award recognises efforts in environmental science and sustainability, as the highest honor in this field conferred by the United States Army, by pledging to reduced energy consumption by 25% over the next ten years, with SCAAP having already decreased electricity and gas consumption by 18.4% than compared to FY2010, as well as capturing, and reusing over 3,100,000 U.S. gal (12,000,000 L; 12,000 m3) equating to a reduction in water consumption of 37%, through the period FY2011-2012; reducing greenhouse gas emissions and pollution; and, material substitution and replacement to reduce zinc phosphate in its production.[7]
In 2016 SCAAP was awarded with the Better Plants Goal Achievement Award by the U.S. Department of Energy for achieving their energy reduction goal, set in 2011; SCAAP had pledged to reduce its energy consumption by 25% over the next ten years. In early 2016 SCAAP exceeded that goal having achieved a reduction of 32% from their 2009 baseline year. [8]
2 Automated Coating Lines (Zinc Phosphate and ID/OD Prime and Paint)
SCAAP has surge capacity that can allow it to increase production volume and capacity at short notice if or when the need arises, with a listed capacity of 1,000,000 metal products. Some of this surge capability [timeframe?] was activated in 2022 due to the demands of the Russo-Ukrainian War.[10][11]
This article incorporates public domain material from the United States Army
