| Part of a serieson |
| Cossacks |
|---|
|
| Cossack hosts |
| Other Cossack groups |
| History |
| Notable Cossacks |
| Cossack terms |
|
|
The shashkaorshasqua (Adyghe: сэшхуэ, [saʃxʷa] – long-knife; Russian: шашка) is a kind of North Caucasian sabre; a single-edged, single-handed, and guardless backsword. The comparatively subtle curve of a shashka blade puts the weapon midway between a typically curved sabre and a straight sword, effective for both cutting and thrusting.
The shashka originated among the mountain tribes of the North Caucasus. The earliest depictions of this sword date to the late 17th century, though most extant shashkas have hilts dating to the 19th century.[1] The earliest datable example is from 1713. Later, most of the Russian and Ukrainian Cossacks adopted the weapon. Two styles of shashka exist: the Caucasian/Circassian shashka and the Cossack shashka. In 1834 the Russian government produced the first military-issue shashka pattern.[2]
The blades of non-regulation shashkas were of diverse origins; some were locally made in the Caucasus, others in Russia, some were manufactured in Germany, mostly in Solingen, and displayed imitations of the 'running wolf' mark of Passau.[3]
The typically Circassian (Adyghe) form of sabre was longer than the Cossack type; in fact, the Russian word shashka originally came from the Adyghe word – Adyghe: Cэшхуэ (Sashko) – meaning "long knife". It gradually replaced the sabre in all cavalry units except hussars during the 19th century.[4]
Russian troops, having encountered it during their conquest of the Caucasus (1817–1864), preferred it to their issued sabres.
At this time, there were three types of non-regulation shashka:
The first officially regulated Russian military shashka was the 1834 pattern, also called the "Nizhegorodka". This was followed by the 1838 pattern shashka. In 1881, two patterns were introduced: a 'Cossack' pattern, which was typical in not having a guard, and a 'dragoon' pattern, which was much more like a standard sabre in having a brass knuckle-bow, and was derived from the 1841 dragoon sabre. The blades of the two types were, however, essentially identical.[5]
The Cossack hosts (not full-time regiments) used non-regulation shashkas until 1904, when they received their own regulation pattern.[6]
The Soviet government introduced the 1927 pattern, which was very similar to the 1881 Cossack pattern; production of this pattern continued until 1946. The last pattern shashkas to be introduced were the 1940 patterns for "line commanding personnel" and generals—both had knuckle-bows.[7]
The shashka was a relatively short sabre, typically being 80 to 105 centimeters (31 to 41 inches) in total length.[8] It had a slightly curved, fullered, blade with a single edge; the back of the blade was often sharpened for the 3rd of the blade nearest the tip (a false edge). The blade length was usually 65 to 80 centimeters (26 to 31 inches). The hilt had no guard (except for Russian Dragoon 'shashka' patterns, which had a brass knuckle-bow and quillon, and a conventional sabre pommel). The pommel was hook-shaped and divided into two 'ears'. This is a feature found in many weapons of the Western Asian highlands, from the Turkish yataghan to the Afghan pesh-kabz. The sword was worn in a scabbard suspended with the edge uppermost. The Caucasian form of the shashka had a scabbard which enclosed most of the hilt, with little more than the hooked pommel protruding.[9]
Plainer, non-regulation shashkas often had hilts of horn, more highly decorated examples had hilts sheathed in niello-inlaid silver, with scabbard mounts to match. Russian military shashkas were much plainer, with hilts typically consisting of a brass ferrule, ribbed wooden grip and brass pommel. Unlike traditional non-regulation shashkas, the pommel of pattern shashkas was pierced to receive a sword-knot. The pommel was decorated with an imperial insignia; following the 1917 revolution, this was often ground off. Shashkas manufactured under the Soviet regime (Pattern 1927) had Communist symbols in place of the imperial ones. Later trooper models often had modified brass scabbard furniture to hold a bayonet for the Mosin–Nagant carbine. Officer's models, though of similar construction, did not have an attached bayonet, and were much more heavily decorated. In Tsarist times officers had considerable freedom in the decoration of their shaskas and some had non-regulation blades.[10]
The 1834 pattern shashka was a popular weapon, when it was replaced by the 1881 pattern, several regiments complained so vociferously that their 1834s were returned to them.[11]
The 1838 Pattern - typical statistics for a pattern sword:
Total length: 1,030 millimeters (41 inches)
Blade length: 875 millimeters (34.4 inches)
Blade width: 36 millimeters (1.4 inches)
Blade curvature: 62–375 millimeters (2.4–14.8 inches)
Point of balance: 170–180 millimeters (6.7–7.1 inches)
Weight: 1,067 grams (2.352 pounds)[12]
There is little or no surviving contemporary written information on how the people of the Caucasus used the shashka. However, surviving Russian military manuals indicate that, despite the lack of protection for the hand, the military shashka was used in much the same manner as a Western European sabre, with very similar cuts, thrusts, guards, and parries. In particular, Russian soldiers were not taught to cut in one movement from unsheathing, whatever Caucasus traditions suggest.[13]
Media related to Shashka at Wikimedia Commons|
| |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||
| Europe |
| ||||||||||
| China |
| ||||||||||
| Korea |
| ||||||||||
| Japan |
| ||||||||||
| India |
| ||||||||||
| Western and Central Asia |
| ||||||||||
| Indonesia |
| ||||||||||
| Philippines |
| ||||||||||
| Mainland Southeast Asia |
| ||||||||||
| Mesoamerica |
| ||||||||||
| Africa |
| ||||||||||
|
Russian handicrafts
| |
|---|---|
| Decorative arts |
|
| Tableware |
|
| Clothing |
|
| Musical instruments |
|
| Toys |
|
| Other |
|
