Contents

Silver oxide battery

Battery using silver oxide as the cathode material

This article needs additional citations for verification. Please help improve this articlebyadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Silver oxide battery" – news · newspapers · books · scholar · JSTOR (May 2008) (Learn how and when to remove this message)

Silver oxide battery

Silver oxide cells
Specific energy	130 Wh/kg[1]
Energy density	500 Wh/L[1]
Specific power	High
Charge/discharge efficiency	N/A
Energy/consumer-price	Low
Time durability	High
Cycle durability	N/A
Nominal cell voltage	1.55V

Asilver oxide battery (IEC code: S) is a primary cell using silver oxide as the cathode material and zinc for the anode. These cells maintain a nearly constant nominal voltage during discharge until fully depleted.^[2] They are available in small sizes as button cells, where the amount of silver used is minimal and not a prohibitively expensive contributor to the overall product cost.

Silver oxide primary batteries account for 30% of all primary battery sales in Japan (64 out of 212 million in February 2020).^[3]

Large silver oxide batteries were used on early ICBM's and satellites because of their high energy-to-weight ratio. For example the Corona reconnaissance satellites used them, as did the Agena-D rocket upper stage.^[4] Later, they were also used in the Apollo Lunar Module and lunar rover.^[5][6]

Chemistry[edit]

Asilver oxide battery uses silver(I) oxide as the positive electrode (cathode), zinc as the negative electrode (anode), plus an alkaline electrolyte, usually sodium hydroxide (NaOH) or potassium hydroxide (KOH). The silver is reduced at the cathode from Ag(I) to Ag, and the zinc is oxidized from Zn to Zn(II).

The half-cell reaction at the positive plate:

${\displaystyle {\ce {Ag2O + H2O + 2e- -> 2Ag ($v) + 2OH-}}} , ${\displaystyle (E^{\circ }=+0.34{\text{ V}})}$

The half-cell reaction at the negative plate:

${\displaystyle {\ce {{Zn}+2OH^{-}->{\overset {Zinc~hydroxide}{Zn($OH)2}}+2e-}}} , ${\displaystyle (E^{\circ }=-1.22{\text{ V}})}$

Overall reaction:

${\displaystyle {\ce {Zn + H2O + Ag2O -> Zn($OH)2 + 2Ag(v)}}} , ${\displaystyle (E^{\circ }=+1.56{\text{ V}})}$

Overall reaction (anhydrous form):

${\displaystyle {\ce {Zn + Ag2O ->[{\ce {KOH/NaOH}}] ZnO + 2Ag ($v)}}}

Mercury content[edit]

Until 2004, all silver oxide batteries contained up to 0.2% mercury, incorporated into the zinc anode to inhibit corrosion from the alkaline environment.^[7] This corrosion would occur regardless of whether or not the battery was providing power, making shelf life an important consideration with silver oxide batteries. Sony started producing the first mercury-free silver oxide batteries in 2004.

See also[edit]

• Battery nomenclature
• Battery recycling
• Comparison of battery types
• Fuel cell
• History of the battery
• List of battery sizes
• List of battery types

References[edit]

External links[edit]

Wikimedia Commons has media related to Silver oxide batteries.

• SR (Silver Oxide Battery) from Maxell