| |
| |
| |
| Names | |
|---|---|
| Preferred IUPAC name
Octadecanoic acid | |
Other names
| |
| Identifiers | |
| |
3D model (JSmol) |
|
| ChEMBL | |
| ChemSpider |
|
| DrugBank |
|
| ECHA InfoCard | 100.000.285 
|
| EC Number |
|
| KEGG | |
PubChem CID |
|
| RTECS number |
|
| UNII | |
CompTox Dashboard (EPA) |
|
| |
| Properties | |
| C18H36O2 | |
| Molar mass | 284.484 g·mol−1 |
| Appearance | White solid |
| Odor | Pungent, oily |
| Density | 0.9408 g/cm3 (20 °C)[2] 0.847 g/cm3 (70 °C) |
| Melting point | 69.3 °C (156.7 °F; 342.4 K)[2] |
| Boiling point | 361 °C (682 °F; 634 K) decomposes 232 °C (450 °F; 505 K) at 15 mmHg[2] |
| 0.00018 g/100 g (0 °C) 0.00029 g/100 g (20 °C) 0.00034 g/100 g (30 °C) 0.00042 g/100 g (45 °C) 0.00050 g/100 g (60 °C)[3] | |
| Solubility | Soluble in
|
| Solubilityindichloromethane | 3.58 g/100 g (25 °C) 8.85 g/100 g (30 °C) 18.3 g/100 g (35 °C)[4] |
| Solubilityinhexane | 0.5 g/100 g (20 °C) 4.3 g/100 g (30 °C) 19 g/100 g (40 °C) 79.2 g/100 g (50 °C) 303 g/100 g (60 °C)[4] |
| Solubilityinethanol | 1.09 g/100 mL (10 °C) 2.25 g/100 g (20 °C) 5.42 g/100 g (30 °C) 22.7 g/100 g (40 °C) 105 g/100 g (50 °C) 400 g/100 g (60 °C)[3] |
| Solubilityinacetone | 4.73 g/100 g[5] |
| Solubilityinchloroform | 15.54 g/100 g[5] |
| Solubilityintoluene | 13.61 g/100 g[5] |
| Vapor pressure | 0.01 kPa (158 °C)[2] 0.46 kPa (200 °C) 16.9 kPa (300 °C)[6] |
| −220.8·10−6cm3/mol | |
| Thermal conductivity | 0.173 W/m·K (70 °C) 0.166 W/m·K (100 °C)[7] |
Refractive index (nD) |
1.4299 (80 °C)[2] |
| Structure | |
| B-form = Monoclinic[8] | |
| B-form = P21/a[8] | |
| B-form = Cs 2h[8] | |
a = 5.591 Å, b = 7.404 Å, c = 49.38 Å (B-form)[8] α = 90°, β = 117.37°, γ = 90° | |
| Thermochemistry | |
Heat capacity (C) |
501.5 J/mol·K[2][6] |
Std molar |
435.6 J/mol·K[2] |
Std enthalpy of |
−947.7 kJ/mol[2] |
Std enthalpy of |
−11342.4 kJ/mol[9] |
| Hazards | |
| NFPA 704 (fire diamond) | |
| Flash point | 205 °C (401 °F; 478 K) |
| Lethal dose or concentration (LD, LC): | |
LD50 (median dose) |
4640 mg/kg (rats, oral)[10] 21.5 mg/kg (rats, intravenous)[4] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Stearic acid (/ˈstɪərɪk/ STEER-ik, /stiˈærɪk/ stee-ARR-ik) is a saturated fatty acid with an 18-carbon chain.[9] The IUPAC nameisoctadecanoic acid.[9] It is a soft waxy solid with the formula CH3(CH2)16CO2H.[9] The triglyceride derived from three molecules of stearic acid is called stearin.[9] Stearic acid is a prevalent fatty-acid in nature, found in many animal and vegetable fats, but is usually higher in animal fat than vegetable fat. It has a melting point of 69.4 °C (156.9 °F) °C and a pKa of 4.50.[11]
Its name comes from the Greek word στέαρ "stéar", which means tallow. The salts and esters of stearic acid are called stearates.[9] As its ester, stearic acid is one of the most common saturated fatty acids found in nature and in the food supply, following palmitic acid.[12][13] Dietary sources of stearic acid include meat, poultry, fish, eggs, dairy products, and foods prepared with fats; beef tallow, lard, butterfat, cocoa butter, and shea butter are rich fat sources of stearic acid.[9][12]
In terms of its biosynthesis, stearic acid is produced from palmitoyl-CoA, with malonyl-CoA a two-carbon building block (after decarboxylation).
Stearic acid is obtained from fats and oils by the saponification of the triglycerides using hot water (about 100 °C). The resulting mixture is then distilled.[14] Commercial stearic acid is often a mixture of stearic and palmitic acids, although purified stearic acid is available. Commercially, oleic acid, as found in palm and soy, can be hydrogenated to give stearic acid.
In general, the applications of stearic acid exploit its bifunctional character, with a polar head group that can be attached to metal cations and a nonpolar chain that confers solubility in organic solvents.[9] The combination leads to uses as a surfactant and softening agent. Stearic acid undergoes the typical reactions of saturated carboxylic acids, a notable one being reduction to stearyl alcohol, and esterification with a range of alcohols.[9] This is used in a large range of manufactures, from simple to complex electronic devices.[9]
Of the saturated fatty acids consumed in the United States, stearic acid consumption is second (26% of total saturated fatty acid intake) to palmitic acid (56% of total saturated fatty acid intake).[12] Stearic acid is more abundant in animal fat (up to 33% in beef liver[15]: 739 ) than in vegetable fat (typically less than 5%).[12] The important exceptions are the foods cocoa butter (34%) and shea butter, where the stearic acid content (as a triglyceride) is 28–45%.[9][15] Examples of the use of stearic acid in food manufacturing include baked goods, frozen dairy products, gelatins, puddings, hard candy, and nonalcoholic beverages.[9]
Stearic acid (E number E570) is found in some foods.[9][16]
Stearic acid is mainly used in the production of detergents, soaps, and cosmetics such as shampoos and shaving cream products.[9] Stearate soap, such as sodium stearate, could be made from stearic acid but instead are usually produced by saponification of stearic acid-containing triglycerides. Esters of stearic acid with ethylene glycol (glycol stearate and glycol distearate) are used to produce a pearly effect in shampoos, soaps, and other cosmetic products.[9]
In view of the soft texture of the sodium salt, which is the main component of soap, other salts are also useful for their lubricating properties. Lithium stearate is an important component of grease. The stearate salts of zinc, calcium, cadmium, and lead are used as heat stabilisers PVC. Stearic acid is used along with castor oil for preparing softeners in textile sizing. They are heated and mixed with caustic potash or caustic soda. Related salts are also commonly used as release agents, e.g. in the production of automobile tires. As an example, it can be used to make castings from a plaster piece moldorwaste mold, and to make a mold from a shellacked clay original. In this use, powdered stearic acid is mixed in water and the suspension is brushed onto the surface to be parted after casting. This reacts with the calcium in the plaster to form a thin layer of calcium stearate, which functions as a release agent.[17]
Steric acid can be converted to zinc stearate, which is used as a lubricant for playing cards (fanning powder) to ensure a smooth motion when fanning. Stearic acid is a common lubricant during injection molding and pressing of ceramic powders.[18]
Being inexpensive, nontoxic, and fairly inert, stearic acid finds many niche applications.[9][14] Varied examples of stearic acid use in manufacturing include soaps and greases, household soap products, synthetic rubber, cosmetic and pharmaceutical creams and lotions, candles, phonograph records, lubricants, shoe and metal polishes, food packaging, and rubber compounds.[9]
Stearic acid is used as a negative plate additive in the manufacture of lead-acid batteries.[citation needed] It is added at the rate of 0.6 g per kg of the oxide while preparing the paste. It is believed to enhance the hydrophobicity of the negative plate, particularly during dry-charging process. It also reduces the extension of oxidation of the freshly formed lead (negative active material) when the plates are kept for drying in the open atmosphere after the process of tank formation. As a consequence, the charging time of a dry uncharged battery during initial filling and charging (IFC) is comparatively lower, as compared to a battery assembled with plates which do not contain stearic acid additive. Fatty acids are classic components of candle-making. Stearic acid is used along with simple sugarorcorn syrup as a hardener in candies.[9]
Anisotope labeling study in humans[19] concluded that the fraction of dietary stearic acid that oxidatively desaturates to oleic acid is 2.4 times higher than the fraction of palmitic acid analogously converted to palmitoleic acid. Also, stearic acid is less likely to be incorporated into cholesterol esters. In epidemiologic and clinical studies, stearic acid was found to be associated with lowered LDL cholesterol in comparison with other saturated fatty acids.[12]
|
| |
|---|---|
| Saturated |
|
| ω−3 Unsaturated |
|
| ω−5 Unsaturated |
|
| ω−6 Unsaturated |
|
| ω−7 Unsaturated |
|
| ω−9 Unsaturated |
|
| ω−10 Unsaturated |
|
| ω−11 Unsaturated |
|
| ω−12 Unsaturated |
|
|
Types of lipids
| |
|---|---|
| General |
|
| Geometry |
|
| Eicosanoids |
|
| Fatty acids |
|
| Glycerides |
|
| Phospholipids |
|
| Sphingolipids |
|
| Steroids |
|
|
| |||||||
|---|---|---|---|---|---|---|---|
| Oil palms |
| ||||||
| Diseases and pests |
| ||||||
| Components |
| ||||||
| Processes |
| ||||||
| Products |
| ||||||
| Organisations |
| ||||||
| Policies, impacts and debates |
| ||||||
| By country |
| ||||||
| |||||||
