Contents

Stress–energy tensor

Tensor describing energy momentum density in spacetime

General relativity
${\displaystyle G_{\mu \nu }+\Lambda g_{\mu \nu }={\kappa }T_{\mu \nu }}$
Introduction History Timeline Tests Mathematical formulation
Fundamental concepts Equivalence principle Special relativity World line Pseudo-Riemannian manifold
Phenomena Kepler problem Gravitational lensing Gravitational redshift Gravitational time dilation Gravitational waves Frame-dragging Geodetic effect Event horizon Singularity Black hole Spacetime Spacetime diagrams Minkowski spacetime Einstein–Rosen bridge
Equations Formalisms Equations Linearized gravity Einstein field equations Friedmann Geodesics Mathisson–Papapetrou–Dixon Hamilton–Jacobi–Einstein Formalisms ADM BSSN Post-Newtonian Advanced theory Kaluza–Klein theory Quantum gravity
Solutions Schwarzschild (interior) Reissner–Nordström Einstein–Rosen waves Wormhole Gödel Kerr Kerr–Newman Kerr–Newman–de Sitter Kasner Lemaître–Tolman Taub–NUT Milne Robertson–Walker Oppenheimer–Snyder pp-wave van Stockum dust Weyl−Lewis−Papapetrou Hartle–Thorne
Scientists Einstein Lorentz Hilbert Poincaré Schwarzschild de Sitter Reissner Nordström Weyl Eddington Friedman Milne Zwicky Lemaître Oppenheimer Gödel Wheeler Robertson Bardeen Walker Kerr Chandrasekhar Ehlers Penrose Hawking Raychaudhuri Taylor Hulse van Stockum Taub Newman Yau Thorne others
Physics portal  Category
v t e

Wikiversity has learning resources about Gravitational stress-energy tensor

The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and fluxofenergy and momentuminspacetime, generalizing the stress tensorofNewtonian physics. It is an attribute of matter, radiation, and non-gravitational force fields. This density and flux of energy and momentum are the sources of the gravitational field in the Einstein field equationsofgeneral relativity, just as mass density is the source of such a field in Newtonian gravity.

Definition[edit]

The stress–energy tensor involves the use of superscripted variables (not exponents; see tensor index notation and Einstein summation notation). If Cartesian coordinatesinSI units are used, then the components of the position four-vector x are given by: (x⁰, x¹, x², x³) = (t, x, y, z), where t is time in seconds, and x, y, and z are distances in meters.

The stress–energy tensor is defined as the tensor T^αβ of order two that gives the flux of the α-th component of the momentum vector across a surface with constant x^β coordinate. In the theory of relativity, this momentum vector is taken as the four-momentum. In general relativity, the stress–energy tensor is symmetric,^[1]

${\displaystyle T^{\alpha \beta }=T^{\beta \alpha }.}$

In some alternative theories like Einstein–Cartan theory, the stress–energy tensor may not be perfectly symmetric because of a nonzero spin tensor, which geometrically corresponds to a nonzero torsion tensor.

Components[edit]

Because the stress–energy tensor is of order 2, its components can be displayed in 4 × 4 matrix form:

${\displaystyle T^{\mu \nu }={\begin{pmatrix}T^{00}&T^{01}&T^{02}&T^{03}\\T^{10}&T^{11}&T^{12}&T^{13}\\T^{20}&T^{21}&T^{22}&T^{23}\\T^{30}&T^{31}&T^{32}&T^{33}\end{pmatrix}}\,,}$

where the indices μ and ν take on the values 0, 1, 2, 3.

In the following, k and ℓ range from 1 through 3:

1. The time–time component is the density of relativistic mass, i.e., the energy density divided by the speed of light squared, while being in the co-moving frame of reference.^[2] It has a direct physical interpretation. In the case of a perfect fluid this component is

   ${\displaystyle T^{00}=\rho ~,}$

   where ${\displaystyle \rho }$ is the relativistic mass per unit volume, and for an electromagnetic field in otherwise empty space this component is

   ${\displaystyle T^{00}={1 \over c^{2}}\left({\frac {1}{2}}\epsilon _{0}E^{2}+{\frac {1}{2\mu _{0}}}B^{2}\right),}$

   where E and B are the electric and magnetic fields, respectively.^[3]
2. The flux of relativistic mass across the x^k surface is equivalent to the density of the kth component of linear momentum,

   ${\displaystyle T^{0k}=T^{k0}~.}$

3. The components
   ${\displaystyle T^{k\ell }}$
   represent flux of kth component of linear momentum across the x^ℓ surface. In particular,

   ${\displaystyle T^{kk}}$

   (not summed) represents normal stress in the kth co-ordinate direction (k = 1, 2, 3), which is called "pressure" when it is the same in every direction, k. The remaining components

   ${\displaystyle T^{k\ell }\quad k\neq \ell }$

   represent shear stress (compare with the stress tensor).

Insolid state physics and fluid mechanics, the stress tensor is defined to be the spatial components of the stress–energy tensor in the proper frame of reference. In other words, the stress–energy tensor in engineering differs from the relativistic stress–energy tensor by a momentum-convective term.

Covariant and mixed forms[edit]

Most of this article works with the contravariant form, T^μν of the stress–energy tensor. However, it is often necessary to work with the covariant form,

${\displaystyle T_{\mu \nu }=T^{\alpha \beta }g_{\alpha \mu }g_{\beta \nu },}$

or the mixed form,

${\displaystyle T^{\mu }{}_{\nu }=T^{\mu \alpha }g_{\alpha \nu },}$

or as a mixed tensor density

${\displaystyle {\mathfrak {T}}^{\mu }{}_{\nu }=T^{\mu }{}_{\nu }{\sqrt {-g}}\,.}$

This article uses the spacelike sign convention (−+++) for the metric signature.

Conservation law[edit]

In special relativity[edit]

The stress–energy tensor is the conserved Noether current associated with spacetime translations.

The divergence of the non-gravitational stress–energy is zero. In other words, non-gravitational energy and momentum are conserved,

${\displaystyle 0=T^{\mu \nu }{}_{;\nu }=\nabla _{\nu }T^{\mu \nu }{}.\!}$

When gravity is negligible and using a Cartesian coordinate system for spacetime, this may be expressed in terms of partial derivatives as

${\displaystyle 0=T^{\mu \nu }{}_{,\nu }=\partial _{\nu }T^{\mu \nu }.\!}$

The integral form of the non-covariant formulation is

${\displaystyle 0=\int _{\partial N}T^{\mu \nu }\mathrm {d} ^{3}s_{\nu }\!}$

where N is any compact four-dimensional region of spacetime; ${\displaystyle \partial N}$ is its boundary, a three-dimensional hypersurface; and ${\displaystyle \mathrm {d} ^{3}s_{\nu }}$ is an element of the boundary regarded as the outward pointing normal.

In flat spacetime and using Cartesian coordinates, if one combines this with the symmetry of the stress–energy tensor, one can show that angular momentum is also conserved:

${\displaystyle 0=(x^{\alpha }T^{\mu \nu }-x^{\mu }T^{\alpha \nu })_{,\nu }.\!}$

In general relativity[edit]

When gravity is non-negligible or when using arbitrary coordinate systems, the divergence of the stress–energy still vanishes. But in this case, a coordinate-free definition of the divergence is used which incorporates the covariant derivative

${\displaystyle 0=\operatorname {div} T=T^{\mu \nu }{}_{;\nu }=\nabla _{\nu }T^{\mu \nu }=T^{\mu \nu }{}_{,\nu }+\Gamma ^{\mu }{}_{\sigma \nu }T^{\sigma \nu }+\Gamma ^{\nu }{}_{\sigma \nu }T^{\mu \sigma }}$

where ${\displaystyle \Gamma ^{\mu }{}_{\sigma \nu }}$ is the Christoffel symbol which is the gravitational force field.

Consequently, if ${\displaystyle \xi ^{\mu }}$ is any Killing vector field, then the conservation law associated with the symmetry generated by the Killing vector field may be expressed as

${\displaystyle 0=\nabla _{\nu }\left(\xi ^{\mu }T_{\mu }^{\nu }\right)={\frac {1}{\sqrt {-g}}}\partial _{\nu }\left({\sqrt {-g}}\ \xi ^{\mu }T_{\mu }^{\nu }\right)}$

The integral form of this is

${\displaystyle 0=\int _{\partial N}{\sqrt {-g}}\ \xi ^{\mu }T_{\mu }^{\nu }\ \mathrm {d} ^{3}s_{\nu }=\int _{\partial N}\xi ^{\mu }{\mathfrak {T}}_{\mu }^{\nu }\ \mathrm {d} ^{3}s_{\nu }}$

In special relativity[edit]

Inspecial relativity, the stress–energy tensor contains information about the energy and momentum densities of a given system, in addition to the momentum and energy flux densities.^[4]

Given a Lagrangian density ${\displaystyle {\mathcal {L}}}$ that is a function of a set of fields ${\displaystyle \phi _{\alpha }}$ and their derivatives, but explicitly not of any of the spacetime coordinates, we can construct the canonical stress-energy tensor by looking at the total derivative with respect to one of the generalized coordinates of the system. So, with our condition

${\displaystyle {\frac {\partial {\mathcal {L}}}{\partial x^{\nu }}}=0}$

By using the chain rule, we then have

${\displaystyle {\frac {d{\mathcal {L}}}{dx^{\nu }}}=d_{\nu }{\mathcal {L}}={\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}{\frac {\partial (\partial _{\mu }\phi _{\alpha })}{\partial x^{\nu }}}+{\frac {\partial {\mathcal {L}}}{\partial \phi _{\alpha }}}{\frac {\partial \phi _{\alpha }}{\partial x^{\nu }}}}$

Written in useful shorthand,

${\displaystyle d_{\nu }{\mathcal {L}}={\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\nu }\partial _{\mu }\phi _{\alpha }+{\frac {\partial {\mathcal {L}}}{\partial \phi _{\alpha }}}\partial _{\nu }\phi _{\alpha }}$

Then, we can use the Euler–Lagrange Equation:

${\displaystyle \partial _{\mu }\left({\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\right)={\frac {\partial {\mathcal {L}}}{\partial \phi _{\alpha }}}}$

And then use the fact that partial derivatives commute so that we now have

${\displaystyle d_{\nu }{\mathcal {L}}={\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\mu }\partial _{\nu }\phi _{\alpha }+\partial _{\mu }\left({\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\right)\partial _{\nu }\phi _{\alpha }}$

We can recognize the right hand side as a product rule. Writing it as the derivative of a product of functions tells us that

${\displaystyle d_{\nu }{\mathcal {L}}=\partial _{\mu }\left[{\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\nu }\phi _{\alpha }\right]}$

Now, in flat space, one can write ${\displaystyle d_{\nu }{\mathcal {L}}=\partial _{\mu }[\delta _{\nu }^{\mu }{\mathcal {L}}]}$. Doing this and moving it to the other side of the equation tells us that

${\displaystyle \partial _{\mu }\left[{\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\nu }\phi _{\alpha }\right]-\partial _{\mu }\left(\delta _{\nu }^{\mu }{\mathcal {L}}\right)=0}$

And upon regrouping terms,

${\displaystyle \partial _{\mu }\left[{\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\nu }\phi _{\alpha }-\delta _{\nu }^{\mu }{\mathcal {L}}\right]=0}$

This is to say that the divergence of the tensor in the brackets is 0. Indeed, with this, we define the stress–energy tensor:

${\displaystyle T_{\nu }^{\mu }\equiv {\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\nu }\phi _{\alpha }-\delta _{\nu }^{\mu }{\mathcal {L}}}$

By construction it has the property that

${\displaystyle \partial _{\mu }T_{\nu }^{\mu }=0}$

Note that this divergenceless property of this tensor is equivalent to four continuity equations. That is, fields have at least four sets of quantities that obey the continuity equation. As an example, it can be seen that ${\displaystyle T_{0}^{0}}$ is the energy density of the system and that it is thus possible to obtain the Hamiltonian density from the stress–energy tensor.

Indeed, since this is the case, observing that ${\displaystyle \partial _{\mu }T_{0}^{\mu }=0}$, we then have

${\displaystyle {\frac {\partial {\mathcal {H}}}{\partial t}}+\nabla \cdot \left({\frac {\partial {\mathcal {L}}}{\partial \nabla \phi _{\alpha }}}{\dot {\phi }}_{\alpha }\right)=0}$

We can then conclude that the terms of ${\displaystyle {\frac {\partial {\mathcal {L}}}{\partial \nabla \phi _{\alpha }}}{\dot {\phi }}_{\alpha }}$ represent the energy flux density of the system.

Trace[edit]

Note that the trace of the stress–energy tensor is defined to be ${\displaystyle T_{\mu }^{\mu }}$, so

${\displaystyle T_{\mu }^{\mu }={\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\mu }\phi _{\alpha }-\delta _{\mu }^{\mu }{\mathcal {L}}.}$

Since ${\displaystyle \delta _{\mu }^{\mu }=4}$,

${\displaystyle T_{\mu }^{\mu }={\frac {\partial {\mathcal {L}}}{\partial (\partial _{\mu }\phi _{\alpha })}}\partial _{\mu }\phi _{\alpha }-4{\mathcal {L}}.}$

In general relativity[edit]

Ingeneral relativity, the symmetric stress–energy tensor acts as the source of spacetime curvature, and is the current density associated with gauge transformations of gravity which are general curvilinear coordinate transformations. (If there is torsion, then the tensor is no longer symmetric. This corresponds to the case with a nonzero spin tensorinEinstein–Cartan gravity theory.)

In general relativity, the partial derivatives used in special relativity are replaced by covariant derivatives. What this means is that the continuity equation no longer implies that the non-gravitational energy and momentum expressed by the tensor are absolutely conserved, i.e. the gravitational field can do work on matter and vice versa. In the classical limit of Newtonian gravity, this has a simple interpretation: kinetic energy is being exchanged with gravitational potential energy, which is not included in the tensor, and momentum is being transferred through the field to other bodies. In general relativity the Landau–Lifshitz pseudotensor is a unique way to define the gravitational field energy and momentum densities. Any such stress–energy pseudotensor can be made to vanish locally by a coordinate transformation.

In curved spacetime, the spacelike integral now depends on the spacelike slice, in general. There is in fact no way to define a global energy–momentum vector in a general curved spacetime.

Einstein field equations[edit]

In general relativity, the stress–energy tensor is studied in the context of the Einstein field equations which are often written as

${\displaystyle R_{\mu \nu }-{\tfrac {1}{2}}R\,g_{\mu \nu }+\Lambda g_{\mu \nu }={8\pi G \over c^{4}}T_{\mu \nu },}$

where ${\displaystyle R_{\mu \nu }}$ is the Ricci tensor, ${\displaystyle R}$ is the Ricci scalar (the tensor contraction of the Ricci tensor), ${\displaystyle g_{\mu \nu }\,}$ is the metric tensor, Λ is the cosmological constant (negligible at the scale of a galaxy or smaller), and ${\displaystyle G}$ is the Newtonian constant of gravitation.

Stress–energy in special situations[edit]

Isolated particle[edit]

In special relativity, the stress–energy of a non-interacting particle with rest mass m and trajectory ${\displaystyle \mathbf {x} _{\text{p}}($t)} is:

${\displaystyle T^{\alpha \beta }(\mathbf {x} ,t)={\frac {m\,v^{\alpha }($t)v^{\beta }(t)}{\sqrt {1-(v/c)^{2}}}}\;\,\delta \left(\mathbf {x} -\mathbf {x} _{\text{p}}(t)\right)={\frac {E}{c^{2}}}\;v^{\alpha }(t)v^{\beta }(t)\;\,\delta (\mathbf {x} -\mathbf {x} _{\text{p}}(t))}

where ${\displaystyle v^{\alpha }}$ is the velocity vector (which should not be confused with four-velocity, since it is missing a ${\displaystyle \gamma }$)

${\displaystyle v^{\alpha }=\left(1,{\frac {d\mathbf {x} _{\text{p}}}{dt}}($t)\right)\,,}

${\displaystyle \delta }$ is the Dirac delta function and ${\textstyle E={\sqrt {p^{2}c^{2}+m^{2}c^{4}}}}$ is the energy of the particle.

Written in language of classical physics, the stress–energy tensor would be (relativistic mass, momentum, the dyadic product of momentum and velocity)

${\displaystyle \left({\frac {E}{c^{2}}},\,\mathbf {p} ,\,\mathbf {p} \,\mathbf {v} \right)}$.

Stress–energy of a fluid in equilibrium[edit]

For a perfect fluidinthermodynamic equilibrium, the stress–energy tensor takes on a particularly simple form

${\displaystyle T^{\alpha \beta }\,=\left(\rho +{p \over c^{2}}\right)u^{\alpha }u^{\beta }+pg^{\alpha \beta }}$

where ${\displaystyle \rho }$ is the mass–energy density (kilograms per cubic meter), ${\displaystyle p}$ is the hydrostatic pressure (pascals), ${\displaystyle u^{\alpha }}$ is the fluid's four-velocity, and ${\displaystyle g^{\alpha \beta }}$ is the matrix inverse of the metric tensor. Therefore, the trace is given by

${\displaystyle T_{\,\alpha }^{\alpha }=g_{\alpha \beta }T^{\beta \alpha }=3p-\rho c^{2}\,.}$

The four-velocity satisfies

${\displaystyle u^{\alpha }u^{\beta }g_{\alpha \beta }=-c^{2}\,.}$

In an inertial frame of reference comoving with the fluid, better known as the fluid's proper frame of reference, the four-velocity is

${\displaystyle u^{\alpha }=(1,0,0,0)\,,}$

the matrix inverse of the metric tensor is simply

${\displaystyle g^{\alpha \beta }\,=\left({\begin{matrix}-{\frac {1}{c^{2}}}&0&0&0\\0&1&0&0\\0&0&1&0\\0&0&0&1\end{matrix}}\right)\,}$

and the stress–energy tensor is a diagonal matrix

${\displaystyle T^{\alpha \beta }=\left({\begin{matrix}\rho &0&0&0\\0&p&0&0\\0&0&p&0\\0&0&0&p\end{matrix}}\right).}$

Electromagnetic stress–energy tensor[edit]

The Hilbert stress–energy tensor of a source-free electromagnetic field is

${\displaystyle T^{\mu \nu }={\frac {1}{\mu _{0}}}\left(F^{\mu \alpha }g_{\alpha \beta }F^{\nu \beta }-{\frac {1}{4}}g^{\mu \nu }F_{\delta \gamma }F^{\delta \gamma }\right)}$

where ${\displaystyle F_{\mu \nu }}$ is the electromagnetic field tensor.

Scalar field[edit]

The stress–energy tensor for a complex scalar field ${\displaystyle \phi }$ that satisfies the Klein–Gordon equation is

${\displaystyle T^{\mu \nu }={\frac {\hbar ^{2}}{m}}\left(g^{\mu \alpha }g^{\nu \beta }+g^{\mu \beta }g^{\nu \alpha }-g^{\mu \nu }g^{\alpha \beta }\right)\partial _{\alpha }{\bar {\phi }}\partial _{\beta }\phi -g^{\mu \nu }mc^{2}{\bar {\phi }}\phi ,}$

and when the metric is flat (Minkowski in Cartesian coordinates) its components work out to be:

${\displaystyle {\begin{aligned}T^{00}&={\frac {\hbar ^{2}}{mc^{4}}}\left(\partial _{0}{\bar {\phi }}\partial _{0}\phi +c^{2}\partial _{k}{\bar {\phi }}\partial _{k}\phi \right)+m{\bar {\phi }}\phi ,\\T^{0i}=T^{i0}&=-{\frac {\hbar ^{2}}{mc^{2}}}\left(\partial _{0}{\bar {\phi }}\partial _{i}\phi +\partial _{i}{\bar {\phi }}\partial _{0}\phi \right),\ \mathrm {and} \\T^{ij}&={\frac {\hbar ^{2}}{m}}\left(\partial _{i}{\bar {\phi }}\partial _{j}\phi +\partial _{j}{\bar {\phi }}\partial _{i}\phi \right)-\delta _{ij}\left({\frac {\hbar ^{2}}{m}}\eta ^{\alpha \beta }\partial _{\alpha }{\bar {\phi }}\partial _{\beta }\phi +mc^{2}{\bar {\phi }}\phi \right).\end{aligned}}}$

Variant definitions of stress–energy[edit]

There are a number of inequivalent definitions^[5] of non-gravitational stress–energy:

Hilbert stress–energy tensor[edit]

The Hilbert stress–energy tensor is defined as the functional derivative

${\displaystyle T_{\mu \nu }={\frac {-2}{\sqrt {-g}}}{\frac {\delta S_{\mathrm {matter} }}{\delta g^{\mu \nu }}}={\frac {-2}{\sqrt {-g}}}{\frac {\partial \left({\sqrt {-g}}{\mathcal {L}}_{\mathrm {matter} }\right)}{\partial g^{\mu \nu }}}=-2{\frac {\partial {\mathcal {L}}_{\mathrm {matter} }}{\partial g^{\mu \nu }}}+g_{\mu \nu }{\mathcal {L}}_{\mathrm {matter} },}$

where ${\displaystyle S_{\mathrm {matter} }}$ is the nongravitational part of the action, ${\displaystyle {\mathcal {L}}_{\mathrm {matter} }}$ is the nongravitational part of the Lagrangian density, and the Euler–Lagrange equation has been used. This is symmetric and gauge-invariant. See Einstein–Hilbert action for more information.

Canonical stress–energy tensor[edit]

Noether's theorem implies that there is a conserved current associated with translations through space and time; for details see the section above on the stress–energy tensor in special relativity. This is called the canonical stress–energy tensor. Generally, this is not symmetric and if we have some gauge theory, it may not be gauge invariant because space-dependent gauge transformations do not commute with spatial translations.

Ingeneral relativity, the translations are with respect to the coordinate system and as such, do not transform covariantly. See the section below on the gravitational stress–energy pseudotensor.

Belinfante–Rosenfeld stress–energy tensor[edit]

In the presence of spin or other intrinsic angular momentum, the canonical Noether stress–energy tensor fails to be symmetric. The Belinfante–Rosenfeld stress–energy tensor is constructed from the canonical stress–energy tensor and the spin current in such a way as to be symmetric and still conserved. In general relativity, this modified tensor agrees with the Hilbert stress–energy tensor.

Gravitational stress–energy[edit]

By the equivalence principle gravitational stress–energy will always vanish locally at any chosen point in some chosen frame, therefore gravitational stress–energy cannot be expressed as a non-zero tensor; instead we have to use a pseudotensor.

In general relativity, there are many possible distinct definitions of the gravitational stress–energy–momentum pseudotensor. These include the Einstein pseudotensor and the Landau–Lifshitz pseudotensor. The Landau–Lifshitz pseudotensor can be reduced to zero at any event in spacetime by choosing an appropriate coordinate system.

See also[edit]

Notes and references[edit]

• W. Wyss (2005). "The Energy–Momentum Tensor in Classical Field Theory" (PDF). Colorado, USA.

External links[edit]

• Lecture, Stephan Waner
• Caltech Tutorial on Relativity — A simple discussion of the relation between the Stress–Energy tensor of General Relativity and the metric