TM-62M – the wire safety clip is still in place; the mine has not been armed
The TM-62 is a Sovietanti-tank blast mine made in many variants. It has a central fuze and typically a 7.5 kilograms (17 lb) explosive charge, but the variants differ greatly in detail. The mine can be laid manually or automatically from a mine laying machine including the PMR-1, PMR-2 wheeled towed mine layers, the GMZ-3 tracked mine laying vehicle and the VMR-2 helicopter mine laying system. The TM-62 can be fitted with the same fuzes as the TM-72, which include MVN-72 and MVN-80 fuzes, which are vibration and magnetism sensitive. The mine was used in the 2022 Russian invasion of Ukraine.
MVCh-62, the standard fuze with a clockwork arming delay of 30 to 120 seconds.
MVN-62
MVN-72, with a combination of electronics and clockwork, after an initial arming delay the magnetic influence fuze is enabled, powered by a 1.5 V battery.
MVN-80, an improved version of the MVN-72.
VM-62Z
MVP-62, with a pneumatic bellows arming delay of 20 to 300 seconds. The delay mechanism uses a minimum of metal making it difficult to detect when used with one of the minimum metal cases.
MVP-62M
ZN-97, a magnetic influence fuze made in Poland.
Magnetic influence fuzes provide full-width attack, i.e. any part of the target vehicle passing over the mine will trigger detonation, not just the track or wheels. However, since magnetic fuzes are electronic, their operational life relies on battery power. Ultimately the battery will run down, after which the mine no longer functions. In contrast, a purely mechanical fuze (usually triggered via a Belleville spring) gives a much longer operational life (e.g., mines planted 50 years previously will still detonate if a target vehicle drives over them).
