Contents

TSX-Plus

TSX-Plus is a multi-user operating system for the PDP-11/LSI-11 series of computers. It was developed by S&H Computer Systems, Inc. and is based on DEC's RT-11 single-user real-time operating system (TSX-Plus installs on top of RT-11).

Overview[edit]

The system is highly configurable and tunable.^{[citation needed]}

Due to the constraints of the memory management system in the PDP-11/LSI-11, the entire operating system core must occupy no more than 40 kibibytes of memory, out of a maximum possible 4 mebibytesofphysical memory that can actually be installed in those machines (mandated by the 22-bit address space). The strength of TSX-Plus is to simultaneously provide to multiple users the services of DEC's single-user RT-11.^[1] Depending on which PDP-11 model and the amount of memory, the system could support a minimum of 12 users^[2] (14-18 users on a 2Mb 11/73, depending on workload). A productivity feature called "virtual lines" "allows a single user to control several tasks from a single terminal."^[3]

The software included a WP package named Lex-11^[4] and a spreadsheet from Saturn Software. The machine slowed considerably if more than 8 students wanted to use the word-processing package at the same time. There was also a decision-table language called "D" from the NCC in Manchester which worked very well on TSX Plus.

History[edit]

Released in 1980, TSX-Plus was the successor to TSX, released in 1976.^[2] The system was popular in the 1980s. The last version of TSX-Plus had TCP/IP support.

S&H wrote the original TSX because "Spending $25K on a computer that could only support one user bugged" (founder Harry Sanders); the outcome was the initial four-user TSX in 1976.^[2]

Bootstrapping[edit]

This section does not cite any sources. Please help improve this sectionbyadding citations to reliable sources. Unsourced material may be challenged and removed. (October 2022) (Learn how and when to remove this message)

TSX-Plus required bootstrapping RT-11 first before running TSX-Plus as a user program. Once TSX-Plus was running, it would take over complete control of the machine from RT-11. It provided true memory protection for users from other users, provided user accounts and maintained account separation on disk volumes and implemented a superset of the RT-11 EMT programmed requests. RT-11 programs generally ran, unmodified, under TSX-Plus and, in fact, most of the RT-11 utilities were used as-is under TSX-Plus. Device drivers generally required only slight modifications.

See also[edit]

• TSX-32

References[edit]

External links[edit]

• S&H Homepage

This operating-system-related article is a stub. You can help Wikipedia by expanding it.